You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Nov 15, 2023. It is now read-only.
I am using bone-debian-9.9-lxqt-armhf-2019-08-03-4gb.img.xz on sd card and booting from sd.
Everything it's working fine , also if sometimes the system is frozen for 20/30 sec., but I have output on HDMI with resolution 1024x768 @60Hz.
I have kernel version 4.14.108-ti-r143
The same problem happens if I use bone-debian-9.12-imgtec-armhf-2020-04-06-4gb.img.xz
My board is element 14 BeagleBone Black Industrial, not any capes installed
root@beaglebone:/boot# /opt/scripts/tools/version.sh
root@beaglebone:# /opt/scripts/tools/version.sh
git:/opt/scripts/:[109f74fb87e6034ae1a8971a244064a8d5e090a5]
eeprom:[A335BNLTEIA03718BBBK063F]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Image 2019-08-03]
bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-00002-gbb4af0f50f]:[location: dd MBR]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-g07d5700e21]:[location: dd MBR]
kernel:[4.14.108-ti-r143]
nodejs:[v6.17.0]
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade ]
pkg:[bb-cape-overlays]:[4.14.20210821.0-0stretch+20210821]
pkg:[bb-wl18xx-firmware]:[1.20190227.1-0rcnee0stretch+20190227]
pkg:[kmod]:[23-2rcnee1stretch+20171005]
pkg:[librobotcontrol]:[1.0.5-git20200715.0-0stretch+20200716]
pkg:[firmware-ti-connectivity]:[20190717-2rcnee1stretch+20200305]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev gpio pwm eqep remoteproc admin spi tisdk weston-launch xenomai cloud9ide]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet]
dmesg | grep remote
[ 1.116787] remoteproc remoteproc0: wkup_m3 is available
[ 1.239297] remoteproc remoteproc0: powering up wkup_m3
[ 1.239419] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
[ 1.241916] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 44.330886] remoteproc remoteproc1: 4a334000.pru is available
[ 44.342865] remoteproc remoteproc2: 4a338000.pru is available
dmesg | grep pru
[ 44.300745] pruss 4a300000.pruss: creating PRU cores and other child platform devices
[ 44.330886] remoteproc remoteproc1: 4a334000.pru is available
[ 44.331006] pru-rproc 4a334000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully
[ 44.342865] remoteproc remoteproc2: 4a338000.pru is available
[ 44.342983] pru-rproc 4a338000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully
dmesg | grep pinctrl-single
[ 0.796837] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 1.162588] pinctrl-single 44e10800.pinmux: pin PIN108 already requested by ocp:A15_pinmux; cannot claim for 0-0070
[ 1.173258] pinctrl-single 44e10800.pinmux: pin-108 (0-0070) status -22
[ 1.179946] pinctrl-single 44e10800.pinmux: could not request pin 108 (PIN108) from group nxp_hdmi_bonelt_pins on device pinctrl-single
dmesg | grep gpio-of-helper
[ 0.809770] gpio-of-helper ocp:cape-universal: ready
lsusb
Bus 001 Device 004: ID 0461:4e6e Primax Electronics, Ltd
Bus 001 Device 005: ID 03f0:094a HP, Inc Optical Mouse [672662-001]
Bus 001 Device 002: ID 2109:2815 VIA Labs, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END
#In the event of edid real failures, uncomment this next line:
#cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet video=HDMI-A-1:1024x768@60e
#Use an overlayfs on top of a read-only root filesystem:
#cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet overlayroot=tmpfs
##enable Generic eMMC Flasher:
##make sure, these tools are installed: dosfstools rsync
#cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
root@beaglebone:/var/log# cat Xorg.0.log
[ 137.355]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 137.355] X Protocol Version 11, Revision 0
[ 137.355] Build Operating System: Linux 5.10.0-5-armmp-lpae armv7l Debian
[ 137.355] Current Operating System: Linux beaglebone 4.14.108-ti-r143 #1stretch SMP PREEMPT Thu May 27 20:03:25 UTC 2021 armv7l
[ 137.356] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet
[ 137.356] Build Date: 15 April 2021 10:42:51AM
[ 137.356] xorg-server 2:1.19.2-1+deb9u8 (https://www.debian.org/support)
[ 137.356] Current version of pixman: 0.34.0
[ 137.356] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 137.357] Markers: (--) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 137.357] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 23 20:09:37 2021
[ 137.358] (==) Using config file: "/etc/X11/xorg.conf"
[ 137.358] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 137.359] (==) ServerLayout "Builtin Default Layout"
[ 137.359] () |-->Screen "Builtin Default fbdev Screen 0" (0)
[ 137.360] () | |-->Monitor "Builtin Default Monitor"
[ 137.361] () | |-->Device "Builtin Default fbdev Device 0"
[ 137.361] (==) Automatically adding devices
[ 137.361] (==) Automatically enabling devices
[ 137.361] (==) Automatically adding GPU devices
[ 137.361] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 137.361] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 137.361] Entry deleted from font path.
[ 137.361] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 137.362] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 137.362] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 137.362] (II) Loader magic: 0x604f60
[ 137.362] (II) Module ABI versions:
[ 137.362] X.Org ANSI C Emulation: 0.4
[ 137.362] X.Org Video Driver: 23.0
[ 137.362] X.Org XInput driver : 24.1
[ 137.362] X.Org Server Extension : 10.0
[ 137.367] (++) using VT number 7
[ 137.368] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 137.371] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 137.373] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 137.373] (II) no primary bus or device found
[ 137.373] falling back to /sys/devices/platform/ocp/56000000.sgx/drm/card1
[ 137.374] (II) LoadModule: "glx"
[ 137.375] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 137.411] (II) Module glx: vendor="X.Org Foundation"
[ 137.411] compiled for 1.19.2, module version = 1.0.0
[ 137.411] ABI class: X.Org Server Extension, version 10.0
[ 137.411] (II) LoadModule: "fbdev"
[ 137.412] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 137.413] (II) Module fbdev: vendor="X.Org Foundation"
[ 137.413] compiled for 1.19.0, module version = 0.4.4
[ 137.413] Module class: X.Org Video Driver
[ 137.413] ABI class: X.Org Video Driver, version 23.0
[ 137.413] (II) FBDEV: driver for framebuffer: fbdev
[ 137.414] (WW) Falling back to old probe method for fbdev
[ 137.414] (II) Loading sub module "fbdevhw"
[ 137.415] (II) LoadModule: "fbdevhw"
[ 137.416] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 137.417] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 137.417] compiled for 1.19.2, module version = 0.0.2
[ 137.417] ABI class: X.Org Video Driver, version 23.0
[ 137.418] (EE) open /dev/fb0: No such file or directory
[ 137.418] (EE) No devices detected.
[ 137.418] (EE)
Fatal server error:
[ 137.418] (EE) no screens found(EE)
[ 137.418] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 137.418] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 137.419] (EE)
[ 137.420] (EE) Server terminated with error (1). Closing log file.
I hope somebody can help me.
Atomino
The text was updated successfully, but these errors were encountered:
I Robert, thanks a lot for your quick response.
Now I have Hdmi output correctly.
I take advantage of your availability to list 2 problems using vncviewer remotely:
1- after opening System Tools->QTerminal the keyboard seems not set correctly, i am using US keyboard on Mac pushing : qwerty the output is : c.gvn ( 5 bad chars instead of 6 )
again : up show : xm
2-If I open Accessories->PCManFm File Manager the system open a window on local screen (Hdmi output ) not on the remote connection
Kind regards
Max ( Atomino )
Sign up for freeto subscribe to this conversation on GitHub.
Already have an account?
Sign in.
I am using bone-debian-9.9-lxqt-armhf-2019-08-03-4gb.img.xz on sd card and booting from sd.
Everything it's working fine , also if sometimes the system is frozen for 20/30 sec., but I have output on HDMI with resolution 1024x768 @60Hz.
I have kernel version 4.14.108-ti-r143
The same problem happens if I use bone-debian-9.12-imgtec-armhf-2020-04-06-4gb.img.xz
My board is element 14 BeagleBone Black Industrial, not any capes installed
root@beaglebone:/boot# /opt/scripts/tools/version.sh
root@beaglebone:
# /opt/scripts/tools/version.shstretch+20210821]git:/opt/scripts/:[109f74fb87e6034ae1a8971a244064a8d5e090a5]
eeprom:[A335BNLTEIA03718BBBK063F]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Image 2019-08-03]
bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-00002-gbb4af0f50f]:[location: dd MBR]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-g07d5700e21]:[location: dd MBR]
kernel:[4.14.108-ti-r143]
nodejs:[v6.17.0]
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade ]
pkg:[bb-cape-overlays]:[4.14.20210821.0-0
pkg:[bb-wl18xx-firmware]:[1.20190227.1-0rcnee0
stretch+20190227]stretch+20171005]pkg:[kmod]:[23-2rcnee1
pkg:[librobotcontrol]:[1.0.5-git20200715.0-0
stretch+20200716]stretch+20200305]pkg:[firmware-ti-connectivity]:[20190717-2rcnee1
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev gpio pwm eqep remoteproc admin spi tisdk weston-launch xenomai cloud9ide]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet]
dmesg | grep remote
[ 1.116787] remoteproc remoteproc0: wkup_m3 is available
[ 1.239297] remoteproc remoteproc0: powering up wkup_m3
[ 1.239419] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
[ 1.241916] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 44.330886] remoteproc remoteproc1: 4a334000.pru is available
[ 44.342865] remoteproc remoteproc2: 4a338000.pru is available
dmesg | grep pru
[ 44.300745] pruss 4a300000.pruss: creating PRU cores and other child platform devices
[ 44.330886] remoteproc remoteproc1: 4a334000.pru is available
[ 44.331006] pru-rproc 4a334000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully
[ 44.342865] remoteproc remoteproc2: 4a338000.pru is available
[ 44.342983] pru-rproc 4a338000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully
dmesg | grep pinctrl-single
[ 0.796837] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 1.162588] pinctrl-single 44e10800.pinmux: pin PIN108 already requested by ocp:A15_pinmux; cannot claim for 0-0070
[ 1.173258] pinctrl-single 44e10800.pinmux: pin-108 (0-0070) status -22
[ 1.179946] pinctrl-single 44e10800.pinmux: could not request pin 108 (PIN108) from group nxp_hdmi_bonelt_pins on device pinctrl-single
dmesg | grep gpio-of-helper
[ 0.809770] gpio-of-helper ocp:cape-universal: ready
lsusb
Bus 001 Device 004: ID 0461:4e6e Primax Electronics, Ltd
Bus 001 Device 005: ID 03f0:094a HP, Inc Optical Mouse [672662-001]
Bus 001 Device 002: ID 2109:2815 VIA Labs, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END
root@beaglebone:~# cd /boot
root@beaglebone:/boot# cat uEnv.txt
#Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0
uname_r=4.14.108-ti-r143
#uuid=
#dtb=
###U-Boot Overlays###
###Documentation: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays
###Master Enable
enable_uboot_overlays=1
###Overide capes with eeprom
#uboot_overlay_addr0=/lib/firmware/.dtbo
#uboot_overlay_addr1=/lib/firmware/.dtbo
#uboot_overlay_addr2=/lib/firmware/.dtbo
#uboot_overlay_addr3=/lib/firmware/.dtbo
###Additional custom capes
#uboot_overlay_addr4=/lib/firmware/.dtbo
#uboot_overlay_addr5=/lib/firmware/.dtbo
#uboot_overlay_addr6=/lib/firmware/.dtbo
#uboot_overlay_addr7=/lib/firmware/.dtbo
###Custom Cape
#dtb_overlay=/lib/firmware/.dtbo
###Disable auto loading of virtual capes (emmc/video/wireless/adc)
#disable_uboot_overlay_emmc=1
#disable_uboot_overlay_video=1
#disable_uboot_overlay_audio=1
#disable_uboot_overlay_wireless=1
#disable_uboot_overlay_adc=1
###PRUSS OPTIONS
###pru_rproc (4.4.x-ti kernel)
#uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-00A0.dtbo
###pru_rproc (4.14.x-ti kernel)
uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo
###pru_rproc (4.19.x-ti kernel)
#uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo
###pru_uio (4.4.x-ti, 4.14.x-ti, 4.19.x-ti & mainline/bone kernel)
#uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo
###Cape Universal Enable
enable_uboot_cape_universal=1
###Debug: disable uboot autoload of Cape
#disable_uboot_overlay_addr0=1
#disable_uboot_overlay_addr1=1
#disable_uboot_overlay_addr2=1
#disable_uboot_overlay_addr3=1
###U-Boot fdt tweaks... (60000 = 384KB)
#uboot_fdt_buffer=0x60000
###U-Boot Overlays###
cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet
#In the event of edid real failures, uncomment this next line:
#cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet video=HDMI-A-1:1024x768@60e
#Use an overlayfs on top of a read-only root filesystem:
#cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet overlayroot=tmpfs
##enable Generic eMMC Flasher:
##make sure, these tools are installed: dosfstools rsync
#cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
root@beaglebone:/var/log# cat Xorg.0.log
[ 137.355]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 137.355] X Protocol Version 11, Revision 0
[ 137.355] Build Operating System: Linux 5.10.0-5-armmp-lpae armv7l Debian
[ 137.355] Current Operating System: Linux beaglebone 4.14.108-ti-r143 #1stretch SMP PREEMPT Thu May 27 20:03:25 UTC 2021 armv7l
[ 137.356] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet
[ 137.356] Build Date: 15 April 2021 10:42:51AM
[ 137.356] xorg-server 2:1.19.2-1+deb9u8 (https://www.debian.org/support)
[ 137.356] Current version of pixman: 0.34.0
[ 137.356] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 137.357] Markers: (--) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 137.357] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 23 20:09:37 2021
[ 137.358] (==) Using config file: "/etc/X11/xorg.conf"
[ 137.358] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 137.359] (==) ServerLayout "Builtin Default Layout"
[ 137.359] () |-->Screen "Builtin Default fbdev Screen 0" (0)
[ 137.360] () | |-->Monitor "Builtin Default Monitor"
[ 137.361] () | |-->Device "Builtin Default fbdev Device 0"
[ 137.361] (==) Automatically adding devices
[ 137.361] (==) Automatically enabling devices
[ 137.361] (==) Automatically adding GPU devices
[ 137.361] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 137.361] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 137.361] Entry deleted from font path.
[ 137.361] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 137.362] Entry deleted from font path.
[ 137.362] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 137.362] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 137.362] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 137.362] (II) Loader magic: 0x604f60
[ 137.362] (II) Module ABI versions:
[ 137.362] X.Org ANSI C Emulation: 0.4
[ 137.362] X.Org Video Driver: 23.0
[ 137.362] X.Org XInput driver : 24.1
[ 137.362] X.Org Server Extension : 10.0
[ 137.367] (++) using VT number 7
[ 137.368] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 137.371] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 137.373] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 137.373] (II) no primary bus or device found
[ 137.373] falling back to /sys/devices/platform/ocp/56000000.sgx/drm/card1
[ 137.374] (II) LoadModule: "glx"
[ 137.375] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 137.411] (II) Module glx: vendor="X.Org Foundation"
[ 137.411] compiled for 1.19.2, module version = 1.0.0
[ 137.411] ABI class: X.Org Server Extension, version 10.0
[ 137.411] (II) LoadModule: "fbdev"
[ 137.412] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 137.413] (II) Module fbdev: vendor="X.Org Foundation"
[ 137.413] compiled for 1.19.0, module version = 0.4.4
[ 137.413] Module class: X.Org Video Driver
[ 137.413] ABI class: X.Org Video Driver, version 23.0
[ 137.413] (II) FBDEV: driver for framebuffer: fbdev
[ 137.414] (WW) Falling back to old probe method for fbdev
[ 137.414] (II) Loading sub module "fbdevhw"
[ 137.415] (II) LoadModule: "fbdevhw"
[ 137.416] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 137.417] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 137.417] compiled for 1.19.2, module version = 0.0.2
[ 137.417] ABI class: X.Org Video Driver, version 23.0
[ 137.418] (EE) open /dev/fb0: No such file or directory
[ 137.418] (EE) No devices detected.
[ 137.418] (EE)
Fatal server error:
[ 137.418] (EE) no screens found(EE)
[ 137.418] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 137.418] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 137.419] (EE)
[ 137.420] (EE) Server terminated with error (1). Closing log file.
I hope somebody can help me.
Atomino
The text was updated successfully, but these errors were encountered: