Compatibility with UISP Fiber 4.6.0?

[cdalvaro]

Has anyone tried to update to UISP Fiber 4.6.0 version?

If so, how was the process? There was any issue after the update?

Thank you in advance!

[micallan17]

I've updated to 4.6.0 but since 4.4.2 it seems we're unable to change the mac address as it reverts back to the original hardcoded mac address. If I downgrade to anything below 4.4.2, it brings back the modified mac address and it works with my ISP who authenticates with serial/vender + mac address. If your ISP only requires the serial to authenticate then it still can be changed on 4.4.2+ firmwares it seems from my testing atleast.

[pmiron]

I've updated to 4.6.0 but since 4.4.2 it seems we're unable to change the mac address as it reverts back to the original hardcoded mac address. If I downgrade to anything below 4.4.2, it brings back the modified mac address and it works with my ISP who authenticates with serial/vender + mac address. If your ISP only requires the serial to authenticate then it still can be changed on 4.4.2+ firmwares it seems from my testing atleast.

Thanks for the reply
I guess you run the config tool after the update to 4.6.0, right?

[micallan17]

if you've changed the serial prior to 4.6.0, I don't think you need run the tool again since the serial does seem to persist from what I can tell. I mean, the only way you'll find out is by updating and once it reboots check if it connects to your ISP. The one that I see doesn't persist after updating to anything above 4.4.x, is the MAC and so far I haven't been able to write a custom mac on anything above 4.4.x.

[pmiron]

I saw problems changing the Profile(from 4 to 2 for instance) then the SN is changed to default. All that with version 4.3.1.
So I had to run the tool again. That's why I'm asking if the tool was rerun after the update

[jspavlick]

I have encountered this with my UFiber Loco. 4.3.1 works, and takes the flashed MAC address, but 4.4.2 and 4.4.6 do not, and they revert to the hardware MAC address.