Is there a way to configure options before sending a file to the printer like in bambu?

[JuanR3D]

I have configured my printer to do a bed mesh in the start_print macro, but i don't want to use it all times.
I dunno if this is possible, but my idea is to create a menu, just like in bambu studio before sending the file to the printer, to select if i want to enable this feature or others.

The idea is that this menu controls the value of a variable, e.g "enable_bed_mesh", and this variable is added in my start_print macro.

For now, my macro is like this:
START_PRINT MODE=0 BED_TEMP=[first_layer_bed_temperature] EXTRUDER0_TEMP={first_layer_temperature[0]} EXTRUDER1_TEMP={first_layer_temperature[1]} INITIAL_EXTRUDER=[initial_extruder] USED_EXTRUDER0={is_extruder_used[0]} USED_EXTRUDER1={is_extruder_used[1]} PRINT_AREA_START={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_AREA_END={first_layer_print_max[0]},{first_layer_print_max[1]}

And it would be as simple as adding: ENABLE_BED_MESH: {enable_bed_mesh}

Thanks in advance!