Bed size - X origin greyed out?

[m4R-T1n]

Hello, can someone tell me why its not possible to use the x origin value in the bed size setup? (x greyed out)
i use different print plates and use it this way to align it to the center.
thanks

[SoftFever]

Hello, can someone tell me why its not possible to use the x origin value in the bed size setup? (x greyed out) i use different print plates and use it this way to align it to the center. thanks

Currently, it doesn't support printers with origin in the bed center(e.g. delta printers). Hence I disabled this option on purpose.

[m4R-T1n]

Hello, no my origin is still in the left front corner. i just have a big printbed 350x250 and a 220x220 pei sheet on top in the center.
so i use the offset and pei size in the profile to heve the origin of the pei sheet right. hope you understand
thank you

[SoftFever]

Some screenshots will be really helpful.

[m4R-T1n]

hope this will help. just a printbed with a pei sheet on top. i want to make 2 printer profiles. first with the offset to "offset 1" und a second for using the printer with the pei sheet with values for "offset 2" in the picture, so i need also the x offset.
maybe it can be done with 4 areas with non printable sections but thats a mess ^^.
here a picture of the geyed out offset and a sketch from the setup.
thank you

[SoftFever]

I see.

If you are using Klipper, there is a better way to achieve it IMO.
You can leave the bed size as 220x220 as is in the Slicer.
In Klipper config, you can play around with position_min for both X and Y axis. e.g. set position_min in [stepper_x] to -offset_1 (-65 in your case). Do the same trick for stepper_y. (Don't forget to update other parameters like position_endstop)
This should work ;)

But the safest and easiest way is probably just to align your PEI sheet with the front left corner of your bed.

[m4R-T1n]

thanks, i use marlin on all my printers. i think i will stay with the big size and wait untill the bed model and texture feature work. this way i can use one setting and i will use my bed model to visually see the borders of the pei sheet.
thank you M.