diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 684ae27936d..b917fc9d23c 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -4992,8 +4992,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -5958,6 +5958,9 @@ msgstr "" msgid "Bottom surface" msgstr "" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "" @@ -6533,6 +6536,9 @@ msgid "" "models. Auto means the brim width is analysed and calculated automatically." msgstr "" +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "" @@ -6550,6 +6556,30 @@ msgid "" "easily" msgstr "" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "" @@ -7168,10 +7198,10 @@ msgstr "" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index 60ae52f9a2d..8f7dae27338 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: 2023-07-17 21:51+0200\n" "Last-Translator: Momo \n" "Language-Team: \n" @@ -5317,8 +5317,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat " "\"Timelapse Wipe Tower\" \n" @@ -6353,6 +6353,9 @@ msgstr "Horní plocha" msgid "Bottom surface" msgstr "Spodní plocha" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Výplň mezery" @@ -7026,6 +7029,9 @@ msgstr "" "Toto ovládá generování límce na vnější a/nebo vnitřní straně modelů. Možnost " "Auto znamená, že šířka límce je automaticky analyzována a vypočítána." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "Pouze vnější" @@ -7044,6 +7050,30 @@ msgid "" msgstr "" "Mezera mezi nejvnitřnějším límcem a předmětem může usnadnit odstranění límce" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Kompatibilní stroj" @@ -7774,10 +7804,10 @@ msgstr "Maximální otáčky ventilátoru ve vrstvě" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě " "\"close_fan_first_layers\" na maximum ve vrstvě \"full_fan_speed_layer\". " @@ -10095,8 +10125,8 @@ msgid "" msgstr "" "Plochou na podložku\n" "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z " -"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku" -"\" nebo stiskněte klávesu F." +"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na " +"podložku\" nebo stiskněte klávesu F." #: resources/data/hints.ini: [hint:Object List] msgid "" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index c17eceb4c58..86d9b0ba169 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -5458,13 +5458,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" -"\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" +">\"Timelapse Wischturm\" wählen." msgid "Line width" msgstr "Breite der Linie" @@ -6526,6 +6526,9 @@ msgstr "Obere Oberfläche" msgid "Bottom surface" msgstr "Untere Fläche" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Lückenfüllung" @@ -7229,6 +7232,9 @@ msgstr "" "Seitevon Modellen. Auto bedeutet, dass die Breite des Brims automatisch " "analysiert und berechnet wird." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "Nur Außen" @@ -7248,6 +7254,30 @@ msgstr "" "Eine Lücke zwischen der innersten Randlinie und dem Objekt kann das Abnehmen " "des Randes erleichtern" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Kompatible Maschine" @@ -8003,13 +8033,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht" -"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " +"Die Lüftergeschwindigkeit wird linear von Null bei der " +"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " "\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, " "wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall " "läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal " diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 35f03cc46dc..a0e84598628 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5275,13 +5275,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgid "Line width" msgstr "Line width" @@ -6307,6 +6307,9 @@ msgstr "Top surface" msgid "Bottom surface" msgstr "Bottom surface" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Gap infill" @@ -6976,6 +6979,9 @@ msgstr "" "This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "" @@ -6995,6 +7001,30 @@ msgstr "" "This creates a gap between the innermost brim line and the object and can " "make the brim easier to remove." +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Compatible machine" @@ -7682,10 +7712,10 @@ msgstr "Full fan speed at layer" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index 69873fb19d0..77d58328f9b 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -6469,6 +6469,9 @@ msgstr "Superficie superior" msgid "Bottom surface" msgstr "Superficie inferior" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Relleno de huecos" @@ -7170,6 +7173,9 @@ msgstr "" "interior de los modelos. Auto significa que el ancho de borde de adherencia " "es analizado y calculado automaticamente." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "Solo borde de adherencia exterior" @@ -7189,6 +7195,30 @@ msgstr "" "Un hueco entre la línea más interna del borde de adherencia y el objeto " "puede hacer que el borde de adherencia se retire más fácilmente" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Máquina compatible" @@ -10331,8 +10361,8 @@ msgid "" msgstr "" "Colocar en la cara\n" "¿Sabías que puedes orientar rápidamente un modelo para que una de sus caras " -"quede sobre el lecho de impresión? Seleccione la función \"Colocar en la cara" -"\" o pulse la tecla F." +"quede sobre el lecho de impresión? Seleccione la función \"Colocar en la " +"cara\" o pulse la tecla F." #: resources/data/hints.ini: [hint:Object List] msgid "" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index 1642873b328..58a8f29c555 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: Guislain Cyril\n" @@ -5441,8 +5441,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Lors de l'enregistrement d'un Timelapse sans tête d'outil, il est recommandé " "d'ajouter une \"Tour d’essuyage Timelapse\"\n" @@ -6513,6 +6513,9 @@ msgstr "Surface supérieure" msgid "Bottom surface" msgstr "Surface inférieure" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Remplissage des espaces" @@ -7222,6 +7225,9 @@ msgstr "" "modèles. Automatique signifie que la largeur de la bordure est analysée et " "calculée automatiquement." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "Bordure extérieure uniquement" @@ -7241,6 +7247,30 @@ msgstr "" "Espace entre la ligne la plus interne de la bordure et l'objet. Cela peut " "faciliter le retrait de la bordure" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Imprimantes compatibles" @@ -7992,10 +8022,10 @@ msgstr "Vitesse maximale du ventilateur à la couche" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à " "la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche " diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index 725687d434e..1053c57a267 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5321,8 +5321,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy " "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb " @@ -6367,6 +6367,9 @@ msgstr "Felső felület" msgid "Bottom surface" msgstr "Alsó felület" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Réskitöltés" @@ -7049,6 +7052,9 @@ msgstr "" "This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "" @@ -7068,6 +7074,30 @@ msgstr "" "A legbelső peremvonal és a tárgy közötti rés, ami megkönnyítheti a perem " "eltávolítását" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Kompatibilis gép" @@ -7757,10 +7787,10 @@ msgstr "Teljes ventilátor fordulatszám ennél a rétegnél" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index 4fbed2d0a48..bbef881bb5c 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5309,8 +5309,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Quando si registra un timelapse senza testa di satmpa, si consiglia di " "aggiungere un \"Timelapse Torre di pulizia\"\n" @@ -6207,8 +6207,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Si desidera aggiornare ora? È possibile " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" -"\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " +"firmware\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -6344,6 +6344,9 @@ msgstr "Top surface" msgid "Bottom surface" msgstr "Bottom surface" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Gap infill" @@ -7021,6 +7024,9 @@ msgstr "" "Auto significa che la larghezza del brim viene analizzata e calcolata " "automaticamente." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "" @@ -7040,6 +7046,30 @@ msgstr "" "This creates a gap between the innermost brim line and the object and can " "make the brim easier to remove." +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Compatible machine" @@ -7730,10 +7760,10 @@ msgstr "Massima velocità della ventola al layer" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" @@ -11797,8 +11827,8 @@ msgstr "" #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di " #~ "aggiungere un \"Timelapse Torre di pulizia\"\n" #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del " -#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia" -#~ "\"».\n" +#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di " +#~ "pulizia\"».\n" #~ msgid "" #~ "When sparse infill density is low, the internal solid infill or internal " diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index ceee3617fa0..4fbce6a8090 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5171,8 +5171,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" @@ -6173,6 +6173,9 @@ msgstr "トップ面" msgid "Bottom surface" msgstr "底面" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "隙間インフィル" @@ -6806,6 +6809,9 @@ msgstr "" "This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "" @@ -6825,6 +6831,30 @@ msgstr "" "ブリムを取り外しやすくする為、一番内側のブリムラインをモデルと少し距離を設け" "ます。" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "対応機種" @@ -7478,10 +7508,10 @@ msgstr "最大回転速度の積層" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index dc282f77e0a..f32fb88072e 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: 2023-08-03 10:45+0900\n" "Last-Translator: Hotsolidinfill\n" "Language-Team: \n" @@ -5243,8 +5243,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 시간 경과를 기록할 경우 \"시간 경과 제거 타워\"를 추가하는 것이 " "좋습니다\n" @@ -6267,6 +6267,9 @@ msgstr "상단 표면" msgid "Bottom surface" msgstr "하단 표면" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "틈(갭) 채우기" @@ -6924,6 +6927,9 @@ msgstr "" "모델의 외부 그리고/또는 내부에서 챙(브림)의 생성을 제어합니다. 자동은 챙(브" "림) 너비가 자동으로 분석 및 계산됨을 의미합니다." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "외부 챙(브림)만" @@ -6943,6 +6949,30 @@ msgstr "" "가장 안쪽 챙(브림) 라인과 개체 사이에 간격을 주어 쉽게 챙(브림)을 제거 할 수 " "있게 합니다" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "호환 장비" @@ -7645,10 +7675,10 @@ msgstr "팬 최대 속도 레이어" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" " "의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 " diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index 72a434850c8..227e9344bf0 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5379,8 +5379,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een " "„Timelapse Wipe Tower” toe te voegen \n" @@ -6436,6 +6436,9 @@ msgstr "Bovenvlak" msgid "Bottom surface" msgstr "Bodem oppervlak" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Gat opvulling" @@ -7124,6 +7127,9 @@ msgstr "" "This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "" @@ -7143,6 +7149,30 @@ msgstr "" "Dit creëert ruimte tussen de binnenste brimlijn en het object en zorgt " "ervoor dat het object eenvoudiger van het printbed kan worden verwijderd." +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Geschikte machine" @@ -7844,10 +7874,10 @@ msgstr "Volledige snelheid op laag" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index d4a46b9e4fb..4ad10b0e908 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: 2023-08-08 15:05+0300\n" "Last-Translator: Ilya \n" "Language-Team: SPb 3D Printing\n" @@ -15,8 +15,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" -"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " +"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" "X-Generator: Poedit 3.3.2\n" msgid "Supports Painting" @@ -5386,8 +5386,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без инструментальной головки рекомендуется добавить " "\"Timelapse Wipe Tower\"\n" @@ -6437,6 +6437,9 @@ msgstr "Верхний слой" msgid "Bottom surface" msgstr "Нижняя поверхность" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Заполнение пробелов" @@ -7126,6 +7129,9 @@ msgstr "" "стороне моделей. Auto означает, что ширина каймы анализируется и " "рассчитывается автоматически." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "кайма снаружи" @@ -7145,6 +7151,30 @@ msgstr "" "Зазор между внутренней линией каймы и предметом может способствовать более " "легкому снятию каймы" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Совместимый принтер" @@ -7901,10 +7931,10 @@ msgstr "Полная скорость вентилятора на слое" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "Скорость вентилятора линейно увеличивается от нуля на уровне " "«close_fan_the_first_x_layers» до максимума на уровне " diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index 95f78310bf6..2c7dde1678e 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5293,8 +5293,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger " "till ett \"Timelapse Wipe Tower\".\n" @@ -6330,6 +6330,9 @@ msgstr "Topp yta" msgid "Bottom surface" msgstr "Botten yta" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Mellanrums ifyllnad" @@ -6988,6 +6991,9 @@ msgstr "" "Detta styr genereringen av brim på modellens yttre och/eller inre sida. Auto " "innebär att brim bredd analyseras och beräknas automatiskt." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "" @@ -7007,6 +7013,30 @@ msgstr "" "Mellanrum mellan innersta brim linjen och objektet kan underlätta vid " "borttagande av brim" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Kompatibel maskin" @@ -7041,9 +7071,9 @@ msgid "" "quality for needle and small details" msgstr "" "Aktivera detta val för att sänka utskifts hastigheten för att göra den sista " -"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel" -"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra " -"kylnings kvaliteten för små detaljer" +"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets " +"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan " +"förbättra kylnings kvaliteten för små detaljer" msgid "Normal printing" msgstr "Normal utskrift" @@ -7689,10 +7719,10 @@ msgstr "Full fläkthastighet vid lager" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" @@ -10465,9 +10495,9 @@ msgstr "" #~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu " #~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna " #~ "användningen av din Bambu Lab enhet godkänner du att följa " -#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor" -#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy " -#~ "ska du inte använda Bambu Labs utrustning och tjänster." +#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade " +#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs " +#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster." #~ msgid "and" #~ msgstr "och" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index bc5fa515835..a5930ba08bb 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: 2023-08-10 20:25-0400\n" "Last-Translator: \n" "Language-Team: \n" @@ -6415,6 +6415,9 @@ msgstr "Верхній шар" msgid "Bottom surface" msgstr "Нижня поверхня" +msgid "Internal Bridge" +msgstr "" + msgid "Gap infill" msgstr "Заповнення пропусків" @@ -7098,6 +7101,9 @@ msgstr "" "Це керує формуванням поля на зовнішній та/або внутрішній сторонімоделей. " "Auto означає, що ширина поля аналізується та обчислюється автоматично." +msgid "Mouse ear" +msgstr "" + msgid "outer_only" msgstr "кайма зовні" @@ -7117,6 +7123,30 @@ msgstr "" "Зазор між внутрішньою лінією кайми та предметом може сприяти легшому зняттю " "кайми" +msgid "Brim ears" +msgstr "" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" + +msgid "Brim ear detection radius" +msgstr "" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" + msgid "Compatible machine" msgstr "Сумісна машина" diff --git a/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po b/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po index 12e066f67b5..c5453a06c8c 100644 --- a/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_cn/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-10 20:42+0800\n" +"POT-Creation-Date: 2023-08-14 19:56+0800\n" "PO-Revision-Date: 2023-04-01 13:21+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -5124,8 +5124,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n" "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。" @@ -6110,6 +6110,9 @@ msgstr "顶面" msgid "Bottom surface" msgstr "底面" +msgid "Internal Bridge" +msgstr "内部搭桥" + msgid "Gap infill" msgstr "填缝" @@ -6712,6 +6715,9 @@ msgid "" msgstr "" "该参数控制在模型的外侧和/或内侧生成brim。自动是指自动分析和计算边框的宽度。" +msgid "Mouse ear" +msgstr "圆盘" + msgid "outer_only" msgstr "仅外侧" @@ -6729,6 +6735,35 @@ msgid "" "easily" msgstr "在brim和模型之间设置间隙，能够让brim更容易剥离" +msgid "Brim ears" +msgstr "圆盘" + +msgid "Only draw brim over the sharp edges of the model." +msgstr "" + +msgid "Brim ear max angle" +msgstr "圆盘最大角度" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~180, brim will be created on everything but straight sections." +msgstr "" +"让圆盘出现的最大角度。\n" +"如果设置为0，则不会创建圆盘。\n" +"如果设置为约180，除直线部分外，其他部分都会创建圆盘。" + +msgid "Brim ear detection radius" +msgstr "圆盘检测半径" + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" +"在检测尖锐角度之前，几何形状将被简化。此参数表示简化的最小偏差长度。\n" +"设为0以停用" + msgid "Compatible machine" msgstr "兼容的机器" @@ -7386,10 +7421,10 @@ msgstr "满速风扇在" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "风扇速度将从“禁用第一层”的零线性上升到“全风扇速度层”的最大。如果低于“禁用风扇" "第一层”，则“全风扇速度第一层”将被忽略，在这种情况下，风扇将在“禁用风扇第一" @@ -14548,8 +14583,8 @@ msgstr "" #~ msgstr "正在准备设置页" #~ msgid "" -#~ "You have the following presets with saved options for \"Print Host upload" -#~ "\"" +#~ "You have the following presets with saved options for \"Print Host " +#~ "upload\"" #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”" #~ msgid "" diff --git a/resources/i18n/es/OrcaSlicer.mo b/resources/i18n/es/OrcaSlicer.mo index e6cec7f496a..5b21077dc90 100644 Binary files a/resources/i18n/es/OrcaSlicer.mo and b/resources/i18n/es/OrcaSlicer.mo differ diff --git a/resources/i18n/zh_cn/OrcaSlicer.mo b/resources/i18n/zh_cn/OrcaSlicer.mo index d889f1a9adf..468dd44a6f8 100644 Binary files a/resources/i18n/zh_cn/OrcaSlicer.mo and b/resources/i18n/zh_cn/OrcaSlicer.mo differ diff --git a/resources/profiles/Anker.json b/resources/profiles/Anker.json index 495faee3521..38904a3bc6e 100644 --- a/resources/profiles/Anker.json +++ b/resources/profiles/Anker.json @@ -1,6 +1,6 @@ { "name": "Anker", - "version": "01.04.04.00", + "version": "01.06.04.00", "force_update": "0", "description": "Anker configurations", "machine_model_list": [ diff --git a/resources/profiles/Anycubic.json b/resources/profiles/Anycubic.json index c0c1270a389..2f0adae02b8 100644 --- a/resources/profiles/Anycubic.json +++ b/resources/profiles/Anycubic.json @@ -1,6 +1,6 @@ { "name": "Anycubic", - "version": "01.05.00.00", + "version": "01.06.00.00", "force_update": "0", "description": "Anycubic configurations", "machine_model_list": [ diff --git a/resources/profiles/Artillery.json b/resources/profiles/Artillery.json index cc118760d37..20c710b1cf4 100644 --- a/resources/profiles/Artillery.json +++ b/resources/profiles/Artillery.json @@ -1,6 +1,6 @@ { "name": "Artillery", - "version": "01.04.04.00", + "version": "01.06.04.00", "force_update": "0", "description": "Artillery configurations", "machine_model_list": [ diff --git a/resources/profiles/BIQU.json b/resources/profiles/BIQU.json index 864a31c2a42..f3620e9284f 100644 --- a/resources/profiles/BIQU.json +++ b/resources/profiles/BIQU.json @@ -1,6 +1,6 @@ { "name": "BIQU", - "version": "01.01.00.00", + "version": "01.06.00.00", "force_update": "0", "description": "BIQU configurations", "machine_model_list": [ diff --git a/resources/profiles/BIQU/machine/fdm_machine_common.json b/resources/profiles/BIQU/machine/fdm_machine_common.json index a449bf13e98..4852f326867 100644 --- a/resources/profiles/BIQU/machine/fdm_machine_common.json +++ b/resources/profiles/BIQU/machine/fdm_machine_common.json @@ -111,6 +111,7 @@ "1" ], "z_lift_type": "NormalLift", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" } diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index a687b3f47bb..2503af2b43f 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -1,6 +1,6 @@ { "name": "Creality", - "version": "01.06.01.00", + "version": "01.06.02.00", "force_update": "0", "description": "Creality configurations", "machine_model_list": [ diff --git a/resources/profiles/Creality/machine/fdm_machine_common.json b/resources/profiles/Creality/machine/fdm_machine_common.json index dc6c76a311f..96af9a80907 100644 --- a/resources/profiles/Creality/machine/fdm_machine_common.json +++ b/resources/profiles/Creality/machine/fdm_machine_common.json @@ -111,6 +111,7 @@ "1" ], "z_hop_types": "Normal Lift", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" diff --git a/resources/profiles/Custom.json b/resources/profiles/Custom.json index 7770ec0d788..cd749a06770 100644 --- a/resources/profiles/Custom.json +++ b/resources/profiles/Custom.json @@ -1,6 +1,6 @@ { "name": "Custom Printer", - "version": "01.06.00.00", + "version": "01.06.01.00", "force_update": "0", "description": "My configurations", "machine_model_list": [ diff --git a/resources/profiles/Elegoo.json b/resources/profiles/Elegoo.json index 152e89f35cc..aa0f884af2f 100644 --- a/resources/profiles/Elegoo.json +++ b/resources/profiles/Elegoo.json @@ -1,6 +1,6 @@ { "name": "Elegoo", - "version": "01.01.00.00", + "version": "01.06.00.00", "force_update": "0", "description": "Elegoo configurations", "machine_model_list": [ diff --git a/resources/profiles/Elegoo/machine/fdm_machine_common.json b/resources/profiles/Elegoo/machine/fdm_machine_common.json index a5e460ac079..41b1832169f 100644 --- a/resources/profiles/Elegoo/machine/fdm_machine_common.json +++ b/resources/profiles/Elegoo/machine/fdm_machine_common.json @@ -112,6 +112,7 @@ ], "z_lift_type": "NormalLift", "default_print_profile": "", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", "machine_end_gcode": "" } diff --git a/resources/profiles/FLSun.json b/resources/profiles/FLSun.json index 5939318fb39..d6ad4084af6 100644 --- a/resources/profiles/FLSun.json +++ b/resources/profiles/FLSun.json @@ -1,6 +1,6 @@ { "name": "FLSun", - "version": "01.06.00.02", + "version": "01.06.04.00", "force_update": "0", "description": "FLSun configurations", "machine_model_list": [ diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json index 306f0ff9880..f428ad7c1d8 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "2", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.16", diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json index 02cbd6f9305..2782454eae8 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "2", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.16", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json index fd7f3d38453..962385bf6ca 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "2", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json index c4191552189..be85322b975 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "2", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json index 0bda64347df..101594de40e 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "2", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.18", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json index a7b46aee250..30fe88f7e6b 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "2", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.18", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json index 348b64d3f9b..a98622daec4 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "2", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.22", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json index 251fb0c6af6..b745caa2fc4 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "2", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.22", diff --git a/resources/profiles/Folgertech.json b/resources/profiles/Folgertech.json index 055508d8a10..ac7caaa7383 100644 --- a/resources/profiles/Folgertech.json +++ b/resources/profiles/Folgertech.json @@ -1,6 +1,6 @@ { "name": "Folgertech", - "version": "01.05.00.03", + "version": "01.06.00.03", "force_update": "0", "description": "Folgertech configurations", "machine_model_list": [ diff --git a/resources/profiles/Folgertech/machine/fdm_machine_common.json b/resources/profiles/Folgertech/machine/fdm_machine_common.json index f7bed81fef2..41d458f5b23 100644 --- a/resources/profiles/Folgertech/machine/fdm_machine_common.json +++ b/resources/profiles/Folgertech/machine/fdm_machine_common.json @@ -112,6 +112,7 @@ ], "z_lift_type": "NormalLift", "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" } diff --git a/resources/profiles/Kingroon.json b/resources/profiles/Kingroon.json index fd8c80d604c..7425dbab23f 100644 --- a/resources/profiles/Kingroon.json +++ b/resources/profiles/Kingroon.json @@ -1,7 +1,7 @@ { "name": "Kingroon", "url": "https://kingroon.com/", - "version": "01.06.04.00", + "version": "01.06.05.00", "force_update": "0", "description": "Kingroon configuration files", "machine_model_list": [ diff --git a/resources/profiles/Kingroon/machine/fdm_machine_common.json b/resources/profiles/Kingroon/machine/fdm_machine_common.json index a0fe64be195..008266b8b75 100644 --- a/resources/profiles/Kingroon/machine/fdm_machine_common.json +++ b/resources/profiles/Kingroon/machine/fdm_machine_common.json @@ -4,7 +4,8 @@ "from": "system", "instantiation": "false", "gcode_flavor": "marlin", - "machine_start_gcode": "", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "machine_start_gcode": "", "machine_end_gcode": "", "extruder_colour": ["#018001"], "extruder_offset": ["0x0"], diff --git a/resources/profiles/OrcaArena.json b/resources/profiles/OrcaArena.json index ce133523498..bf6cf291a0b 100644 --- a/resources/profiles/OrcaArena.json +++ b/resources/profiles/OrcaArena.json @@ -1,7 +1,7 @@ { "name": "Orca Arena Printer", "url": "", - "version": "01.06.01.00", + "version": "01.06.02.00", "force_update": "0", "description": "Orca Arena configuration files", "machine_model_list": [ diff --git a/resources/profiles/OrcaArena/machine/fdm_machine_common.json b/resources/profiles/OrcaArena/machine/fdm_machine_common.json index 87a95f7192f..fc6f3492c5f 100644 --- a/resources/profiles/OrcaArena/machine/fdm_machine_common.json +++ b/resources/profiles/OrcaArena/machine/fdm_machine_common.json @@ -111,6 +111,7 @@ "1" ], "default_print_profile": "0.16mm Optimal @Orca Arena X1 Carbon 0.4 nozzle", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" } diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index 5da4f751610..5eda29198c1 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -1,6 +1,6 @@ { "name": "Prusa", - "version": "01.05.04.00", + "version": "01.06.04.00", "force_update": "0", "description": "Prusa configurations", "machine_model_list": [ diff --git a/resources/profiles/Prusa/machine/fdm_machine_common.json b/resources/profiles/Prusa/machine/fdm_machine_common.json index a6f78e6f0c5..8680aa36fbd 100644 --- a/resources/profiles/Prusa/machine/fdm_machine_common.json +++ b/resources/profiles/Prusa/machine/fdm_machine_common.json @@ -129,6 +129,7 @@ "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "layer_change_gcode": "", "machine_pause_gcode": "M400 U1\n", "wipe": [ diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json index 94b13a8455e..b96dee00af2 100644 --- a/resources/profiles/Qidi.json +++ b/resources/profiles/Qidi.json @@ -1,6 +1,6 @@ { "name": "Qidi", - "version": "01.06.04.01", + "version": "01.06.05.00", "force_update": "0", "description": "Qidi configurations", "machine_model_list": [ diff --git a/resources/profiles/Qidi/machine/fdm_machine_common.json b/resources/profiles/Qidi/machine/fdm_machine_common.json index a5eabbf0498..5adf358b38a 100644 --- a/resources/profiles/Qidi/machine/fdm_machine_common.json +++ b/resources/profiles/Qidi/machine/fdm_machine_common.json @@ -112,6 +112,7 @@ ], "z_lift_type": "NormalLift", "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" } diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json index 4f02556b5c5..0fa912eb552 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json index 5d317240423..67e7997bb93 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json index e1787ab4d8f..5d05f2db34a 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json index 817f42585e6..3de23e3e98f 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json index 13aa70f64e3..238c45013cc 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json index 2d971ebcda2..5e4cd62f791 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json index 8806562d94f..5e8d36c1baa 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json index 1589e58fe01..6cdbbb2872e 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json index f205c10a7f7..08f9ffe5a90 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json index 4ac84ae206f..5121a5ac229 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json index 5828f59c100..65617a9e178 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json index ac81885a634..a1dfca01cdf 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json index 4bc19c327bd..7f756d20833 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json index d6aeb92fea0..42b9e70afff 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json index 4e4eb6881d2..d05dbd242bd 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json index 1b6776cba0d..33e3771d302 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json index 5c28e896290..6d817e65da8 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json index 590c764b334..019b4a5e4cb 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json index 5273b4903bf..5dad9f49219 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json index 2ea07fdb7e0..c910d4d58ff 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json index f2c49b11b1b..85b633b02d1 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json index 7953275a029..023678aaa9d 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json index a2503c9aa62..1c3f8e140cc 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json index fb9a5a52ed5..85d05027958 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json index d2f70ca377b..30da45b91bc 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json index 8f76f024de4..b3a46288f92 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json index f41597bbb56..6ad93ae788a 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json index 6ed675ca1e0..96233b69942 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json @@ -74,7 +74,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json index c49d85c0fde..baaa6296221 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json index 69df5ac224c..99deee34db8 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json @@ -62,7 +62,7 @@ "support_interface_filament": "0", "support_interface_top_layers": "3", "support_interface_bottom_layers": "-1", - "support_interface_spacing": "2.5", + "support_interface_spacing": "0.5", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", "support_threshold_angle": "30", diff --git a/resources/profiles/Raise3D.json b/resources/profiles/Raise3D.json index 8632254be67..6a83b08fcf1 100644 --- a/resources/profiles/Raise3D.json +++ b/resources/profiles/Raise3D.json @@ -1,7 +1,7 @@ { "name": "Raise3D", "url": "", - "version": "01.00.00.00", + "version": "01.06.00.00", "force_update": "0", "description": "Raise3D configurations", "machine_model_list": [ diff --git a/resources/profiles/Raise3D/machine/fdm_machine_common.json b/resources/profiles/Raise3D/machine/fdm_machine_common.json index 31fc61df862..56e8374ef7d 100644 --- a/resources/profiles/Raise3D/machine/fdm_machine_common.json +++ b/resources/profiles/Raise3D/machine/fdm_machine_common.json @@ -112,6 +112,7 @@ ], "z_lift_type": "NormalLift", "default_print_profile": "", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", "machine_end_gcode": "" } diff --git a/resources/profiles/Ratrig.json b/resources/profiles/Ratrig.json index 59a26fb0d7f..55abfdcf6c4 100644 --- a/resources/profiles/Ratrig.json +++ b/resources/profiles/Ratrig.json @@ -1,6 +1,6 @@ { "name": "RatRig", - "version": "01.06.04.00", + "version": "01.06.05.01", "force_update": "0", "description": "RatRig configurations", "machine_model_list": [ diff --git a/resources/profiles/Ratrig/machine/fdm_machine_common.json b/resources/profiles/Ratrig/machine/fdm_machine_common.json index 7581aec5ec0..f99c7833679 100644 --- a/resources/profiles/Ratrig/machine/fdm_machine_common.json +++ b/resources/profiles/Ratrig/machine/fdm_machine_common.json @@ -111,6 +111,7 @@ "1" ], "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" } diff --git a/resources/profiles/Sovol.json b/resources/profiles/Sovol.json index f6e66daa7e8..781a13e66d9 100644 --- a/resources/profiles/Sovol.json +++ b/resources/profiles/Sovol.json @@ -1,7 +1,7 @@ { "name": "Sovol", "url": "", - "version": "01.00.00.00", + "version": "01.06.00.00", "force_update": "0", "description": "Sovol configurations", "machine_model_list": [ diff --git a/resources/profiles/Sovol/machine/fdm_machine_common.json b/resources/profiles/Sovol/machine/fdm_machine_common.json index 31fc61df862..56e8374ef7d 100644 --- a/resources/profiles/Sovol/machine/fdm_machine_common.json +++ b/resources/profiles/Sovol/machine/fdm_machine_common.json @@ -112,6 +112,7 @@ ], "z_lift_type": "NormalLift", "default_print_profile": "", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", "machine_end_gcode": "" } diff --git a/resources/profiles/Tronxy.json b/resources/profiles/Tronxy.json index 7e22e03dc12..481a1f9dae0 100644 --- a/resources/profiles/Tronxy.json +++ b/resources/profiles/Tronxy.json @@ -1,6 +1,6 @@ { "name": "Tronxy", - "version": "01.05.10.1", + "version": "01.06.00.1", "force_update": "0", "description": "Tronxy configurations", "machine_model_list": [ diff --git a/resources/profiles/Tronxy/machine/fdm_machine_common.json b/resources/profiles/Tronxy/machine/fdm_machine_common.json index 7678d51c5a2..08a818ba461 100644 --- a/resources/profiles/Tronxy/machine/fdm_machine_common.json +++ b/resources/profiles/Tronxy/machine/fdm_machine_common.json @@ -111,6 +111,7 @@ "1" ], "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" } diff --git a/resources/profiles/TwoTrees.json b/resources/profiles/TwoTrees.json index 1691b3a0b5a..5910551df4f 100644 --- a/resources/profiles/TwoTrees.json +++ b/resources/profiles/TwoTrees.json @@ -1,6 +1,6 @@ { "name": "TwoTrees", - "version": "01.05.01", + "version": "01.06.01.00", "force_update": "1", "description": "TwoTrees configurations", "machine_model_list": [ diff --git a/resources/profiles/TwoTrees/machine/fdm_machine_common.json b/resources/profiles/TwoTrees/machine/fdm_machine_common.json index f25cff34da6..9ea5fb9eb69 100644 --- a/resources/profiles/TwoTrees/machine/fdm_machine_common.json +++ b/resources/profiles/TwoTrees/machine/fdm_machine_common.json @@ -111,6 +111,7 @@ "1" ], "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" } diff --git a/resources/profiles/UltiMaker.json b/resources/profiles/UltiMaker.json index a047789caa5..e0f88c01106 100644 --- a/resources/profiles/UltiMaker.json +++ b/resources/profiles/UltiMaker.json @@ -1,7 +1,7 @@ { "name": "UltiMaker", "url": "", - "version": "01.01.00.00", + "version": "01.06.00.00", "force_update": "0", "description": "UltiMaker configurations", "machine_model_list": [ diff --git a/resources/profiles/UltiMaker/machine/fdm_machine_common.json b/resources/profiles/UltiMaker/machine/fdm_machine_common.json index 6127f006932..bb2cfc5823d 100644 --- a/resources/profiles/UltiMaker/machine/fdm_machine_common.json +++ b/resources/profiles/UltiMaker/machine/fdm_machine_common.json @@ -112,6 +112,7 @@ ], "z_lift_type": "NormalLift", "default_print_profile": "", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", "machine_end_gcode": "" } diff --git a/resources/profiles/Vivedino.json b/resources/profiles/Vivedino.json index 001f1f4b8ea..1471f9e416e 100644 --- a/resources/profiles/Vivedino.json +++ b/resources/profiles/Vivedino.json @@ -1,6 +1,6 @@ { "name": "Vivedino", - "version": "01.06.00.01", + "version": "01.06.04.01", "force_update": "0", "description": "Vivedino configurations", "machine_model_list": [ diff --git a/resources/profiles/Voron.json b/resources/profiles/Voron.json index 6cbe06c8e88..31cfd66856d 100644 --- a/resources/profiles/Voron.json +++ b/resources/profiles/Voron.json @@ -1,6 +1,6 @@ { "name": "Voron", - "version": "01.06.04.02", + "version": "01.06.05.02", "force_update": "0", "description": "Voron configurations", "machine_model_list": [ diff --git a/resources/profiles/Voron/machine/fdm_machine_common.json b/resources/profiles/Voron/machine/fdm_machine_common.json index a9812920577..5d141cce1b6 100644 --- a/resources/profiles/Voron/machine/fdm_machine_common.json +++ b/resources/profiles/Voron/machine/fdm_machine_common.json @@ -111,6 +111,7 @@ "1" ], "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" } diff --git a/resources/profiles/Voxelab.json b/resources/profiles/Voxelab.json index 99631788557..053f250506f 100644 --- a/resources/profiles/Voxelab.json +++ b/resources/profiles/Voxelab.json @@ -1,7 +1,7 @@ { "name": "Voxelab", "url": "", - "version": "01.00.00.00", + "version": "01.06.00.00", "force_update": "0", "description": "Voxelab configurations", "machine_model_list": [ diff --git a/resources/profiles/Voxelab/machine/fdm_machine_common.json b/resources/profiles/Voxelab/machine/fdm_machine_common.json index 31fc61df862..56e8374ef7d 100644 --- a/resources/profiles/Voxelab/machine/fdm_machine_common.json +++ b/resources/profiles/Voxelab/machine/fdm_machine_common.json @@ -112,6 +112,7 @@ ], "z_lift_type": "NormalLift", "default_print_profile": "", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", "machine_end_gcode": "" } diff --git a/resources/profiles/Vzbot.json b/resources/profiles/Vzbot.json index 8817a26c788..de86c5aa304 100644 --- a/resources/profiles/Vzbot.json +++ b/resources/profiles/Vzbot.json @@ -1,6 +1,6 @@ { "name": "Vzbot", - "version": "01.06.00.00", + "version": "01.06.04.00", "force_update": "0", "description": "Vzbot configurations", "machine_model_list": [ diff --git a/resources/profiles/Vzbot/machine/fdm_machine_common.json b/resources/profiles/Vzbot/machine/fdm_machine_common.json index d15f98aeef7..885d9dfd695 100644 --- a/resources/profiles/Vzbot/machine/fdm_machine_common.json +++ b/resources/profiles/Vzbot/machine/fdm_machine_common.json @@ -111,6 +111,7 @@ "1" ], "default_print_profile": "0.20mm Standard @Vzbot", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" }