From 217d2bb411b37c111b15497e8e2b7db99898ea72 Mon Sep 17 00:00:00 2001 From: SoftFever Date: Sun, 16 Jun 2024 23:44:34 +0800 Subject: [PATCH] update loacale --- localization/i18n/OrcaSlicer.pot | 18 ++++++++++++++- localization/i18n/ca/OrcaSlicer_ca.po | 18 ++++++++++++++- localization/i18n/cs/OrcaSlicer_cs.po | 18 ++++++++++++++- localization/i18n/de/OrcaSlicer_de.po | 18 ++++++++++++++- localization/i18n/en/OrcaSlicer_en.po | 18 ++++++++++++++- localization/i18n/es/OrcaSlicer_es.po | 18 ++++++++++++++- localization/i18n/fr/OrcaSlicer_fr.po | 18 ++++++++++++++- localization/i18n/hu/OrcaSlicer_hu.po | 18 ++++++++++++++- localization/i18n/it/OrcaSlicer_it.po | 18 ++++++++++++++- localization/i18n/ja/OrcaSlicer_ja.po | 18 ++++++++++++++- localization/i18n/ko/OrcaSlicer_ko.po | 18 ++++++++++++++- localization/i18n/nl/OrcaSlicer_nl.po | 18 ++++++++++++++- localization/i18n/pl/OrcaSlicer_pl.po | 18 ++++++++++++++- localization/i18n/pt_BR/OrcaSlicer_pt_BR.po | 18 ++++++++++++++- localization/i18n/ru/OrcaSlicer_ru.po | 18 ++++++++++++++- localization/i18n/sv/OrcaSlicer_sv.po | 18 ++++++++++++++- localization/i18n/tr/OrcaSlicer_tr.po | 18 ++++++++++++++- localization/i18n/uk/OrcaSlicer_uk.po | 18 ++++++++++++++- localization/i18n/zh_CN/OrcaSlicer_zh_CN.po | 25 ++++++++++++++++++++- localization/i18n/zh_TW/OrcaSlicer_zh_TW.po | 18 ++++++++++++++- 20 files changed, 347 insertions(+), 20 deletions(-) diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 5f9580f70c9..06d96616293 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -9687,6 +9687,22 @@ msgid "" "at least at minimum speed to reduce the frequency of starting and stoping" msgstr "" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "" diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po index 3d9421ac4c2..824af47a08c 100644 --- a/localization/i18n/ca/OrcaSlicer_ca.po +++ b/localization/i18n/ca/OrcaSlicer_ca.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2024-06-15 11:02+0200\n" "Last-Translator: \n" "Language-Team: \n" @@ -10877,6 +10877,22 @@ msgstr "" "s'aturarà mai i funcionarà almenys a una velocitat mínima per reduir la " "freqüència d'arrencada i aturada" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Temps de capa" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index aea79d9f9a6..1da4be70425 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2023-09-30 15:15+0200\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -10384,6 +10384,22 @@ msgstr "" "nezastaví a poběží alespoň na minimální rychlost, aby se snížila frekvence " "spouštění a zastavování" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Čas vrstvy" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index cdf0209c6a0..9d896855b55 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -10948,6 +10948,22 @@ msgstr "" "und läuft zumindest mit minimaler Geschwindigkeit, um die Häufigkeit des " "Ein- und Ausschaltens zu reduzieren" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Schichtdauer" diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 3657b7c4cbf..8cbf0596142 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -10305,6 +10305,22 @@ msgstr "" "and will instead run at least at minimum speed to reduce the frequency of " "starting and stopping." +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Layer time" diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index 29dd7d657d1..cd4a7dae776 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: \n" "Last-Translator: Carlos Fco. Caruncho Serrano \n" "Language-Team: \n" @@ -10924,6 +10924,22 @@ msgstr "" "Si se activa este ajuste, el ventilador nunca se detendrá y funcionará al " "menos a la velocidad mínima para reducir la frecuencia de arranque y parada" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Tiempo de capa" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index 301828c5a56..8313ad89060 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: Guislain Cyril, Thomas Lété\n" @@ -11012,6 +11012,22 @@ msgstr "" "sera jamais arrêté et fonctionnera au moins à la vitesse minimale pour " "réduire la fréquence de démarrage et d'arrêt" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Temps de couche" diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index 9ed4a214be4..2e2fef8582a 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -10420,6 +10420,22 @@ msgstr "" "és legalább a minimális fordulatszámon fog járni, hogy csökkentse az indítás " "és leállítás gyakoriságát" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Rétegidő" diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index f28f18b1916..fb4a112522c 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -10849,6 +10849,22 @@ msgstr "" "arresterà mai del tutto, ma funzionerà almeno alla velocità minima per " "ridurre la frequenza di avvio e arresto." +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Layer time" diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index 971821c4f5a..826eec1736a 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -10194,6 +10194,22 @@ msgstr "" "この設定により、パーツ冷却ファンを停止しなく、最低速度で回転します。頻繁に回" "転・停止の頻度を減らします。" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "積層時間" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index b923d8daa7d..657d42b8717 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2024-05-31 23:33+0900\n" "Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply." "github.com>, crwusiz \n" @@ -10470,6 +10470,22 @@ msgstr "" "이 설정을 활성화하면 출력물 냉각 팬이 정지되지 않으며 팬을 최소 속도로 가동하" "여 시동 및 정지 빈도를 줄입니다" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "레이어 시간" diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index e53ee086c20..29cceb5950b 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -10520,6 +10520,22 @@ msgstr "" "staan op een minimale snelheid om het aantal start en stop momenten te " "beperken" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Laag tijd" diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po index d24f1b68219..51c87ce8620 100644 --- a/localization/i18n/pl/OrcaSlicer_pl.po +++ b/localization/i18n/pl/OrcaSlicer_pl.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer 2.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: \n" "Last-Translator: Krzysztof Morga \n" "Language-Team: \n" @@ -10848,6 +10848,22 @@ msgstr "" "zatrzymany i będzie pracował przynajmniej z minimalną prędkością, aby " "zmniejszyć częstotliwość włączania i wyłączania" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Czas warstwy" diff --git a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po index e061060c599..4abe42cdb8e 100644 --- a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po +++ b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2024-06-01 21:51-0300\n" "Last-Translator: \n" "Language-Team: Portuguese, Brazilian\n" @@ -10818,6 +10818,22 @@ msgstr "" "será desligado e funcionará pelo menos na velocidade mínima para reduzir a " "frequência de início e parada" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Tempo da camada" diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index 5e1f5f81624..e4deb297892 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer V2.0.0 Official Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2024-04-12 13:49+0700\n" "Last-Translator: \n" "Language-Team: andylg@yandex.ru\n" @@ -10841,6 +10841,22 @@ msgstr "" "и будет работать на минимальной скорости, чтобы сократить частоту его " "запуска и остановки." +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Время слоя" diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index ca9faa09470..e177ee9d9bc 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -10321,6 +10321,22 @@ msgstr "" "och den kommer att åtminstone gå på lägsta hastighet för att minska " "frekvensen av start och stopp" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Lager tid" diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po index 68b86699e9f..d0574827bc8 100644 --- a/localization/i18n/tr/OrcaSlicer_tr.po +++ b/localization/i18n/tr/OrcaSlicer_tr.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2024-06-02 22:13+0300\n" "Last-Translator: Olcay ÖREN\n" "Language-Team: \n" @@ -10699,6 +10699,22 @@ msgstr "" "ve başlatma ve durdurma sıklığını azaltmak için en azından minimum hızda " "çalışacaktır" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Katman süresi" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index 667a1ce584d..ede0b64483a 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2024-05-30 12:35+0300\n" "Last-Translator: \n" "Language-Team: \n" @@ -10777,6 +10777,22 @@ msgstr "" "будезупинятиметься і працюватиме\n" "хоча б на мінімальній швидкості для зменшення частоти пусків та зупинок" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "Час шару" diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index c10ac9ddd39..e4f3dda7baf 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2023-04-01 13:21+0800\n" "Last-Translator: SoftFever \n" "Language-Team: \n" @@ -10079,6 +10079,29 @@ msgstr "" "如果勾选这个选项，部件冷却风扇将永远不会停止，并且会至少运行在最小风扇转速值" "以减少风扇的启停频次" +msgid "Don't slow down outer walls" +msgstr "不减速外墙" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" +"如果启用，此设置将确保外墙不会为了满足最小层时间而减速。这在以下情况下特别有帮" +"助：\n" +"\n" +"1. 避免在打印光滑耗材时改变光泽\n" +"2. 避免改变外墙速度，可能会产生轻微的墙壁伪影，看起来像z条纹\n" +"3. 避免以会在外墙上产生VFAs（细微伪影）的速度打印\n" +"\n" + msgid "Layer time" msgstr "层时间" diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po index 14654f9b317..728f860ebf5 100644 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po +++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-06-16 20:59+0800\n" +"POT-Creation-Date: 2024-06-16 23:01+0800\n" "PO-Revision-Date: 2023-11-06 14:37+0800\n" "Last-Translator: ablegods \n" "Language-Team: \n" @@ -10424,6 +10424,22 @@ msgstr "" "如果勾選這個選項，部件冷卻風扇將永遠不會停止，並且會以最小風扇轉速設定值持運" "運轉以減少風扇的頻繁開關" +msgid "Don't slow down outer walls" +msgstr "" + +msgid "" +"If enabled, this setting will ensure external perimeters are not slowed down " +"to meet the minimum layer time. This is particularly helpful in the below " +"scenarios:\n" +"\n" +" 1. To avoid changes in shine when printing glossy filaments \n" +"2. To avoid changes in external wall speed which may create slight wall " +"artefacts that appear like z banding \n" +"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the " +"external walls\n" +"\n" +msgstr "" + msgid "Layer time" msgstr "層時間"