Skip to content

Latest commit

 

History

History
138 lines (96 loc) · 4.34 KB

README.md

File metadata and controls

138 lines (96 loc) · 4.34 KB
Raw

Intro

This repository contains the files required to build an easy to use MP3 player for small children. This project is heavily inspired by Hoerbert.

PCB CAD Inside Inside

Main components required to build:

  • Arduino Uno
  • Adafruit Music Maker shield
  • Speaker
  • Button PCB (see below)
  • Volume Pot
  • On/Off switch
  • Battery holders
  • Hookup wire

Button PCB schematics

I created a custom PCB for the input buttons. The schematics for that are in the cad directory in KiCad format. The Arduino UNO does not have enough GPIO pins for the Music Maker shield, the volume pot, and 12 buttons. To reduce the amount of GPIO pins required for the buttons I used 2 shift registers. That reduces the amount of required pins for the buttons to 3.

I used the following components:

PCB CAD PCB Pinout PCB etched PCB populated

If you want to etch the PCB yourself you can print this PDF on a transparency. Make sure to use US letter sized transparencies if you use the PDF below. Alternatively you can just create a new PDF from the KiCad layout.

PCB transparency

I followed this PCB etching process

Button layout

Regular mode

[album 1]   [album 2]       [album 3]
[album 4]   [album 5]       [album 6]
[album 7]   [album 8]       [album 9]
[prev]      [play_pause]    [next]

God mode

[1]         [2]             [3]
[4]         [5]             [6]
[7]         [8]             [9]
[0]         [play_pause]    [next]

God mode

The player supports 2 different modes. Regular mode and god mode. In regular mode one album is assigned to each button. This is the default mode and what the device is mainly intended for. To add more functionality, god mode has been added. This mode allows to add an alternative set of albums which makes it a handy MP3 player for parents as well. In that mode instead of directly playing an album for each button press, the buttons act as numerical input buttons. 2 buttons have to be pressed to select an album. I.e. 4 - 2 to select album 42. Up to 99 albums are supported in god mode.

To enter god mode the god mode sequence has to be pressed. The god mode sequence is: prev - play_pause - play_ pause - next (regular mode keyboard layout). The same sequence can be used to switch back to regular mode. When the sequence has been entered correctly a short beep will sound.

SD card

Structure

The SD card needs to be formated with FAT32.

The root folder structure needs to be:

k01 ... k09 for the regular albums and

g01 ... g99 for the god mode albums

The files in each folder need to be named:

01.mp3 ... 99.mp3

i.e.

/k06/01.mp3
/k06/02.mp3
/k06/03.mp3
/k06/04.mp3
/k06/05.mp3
/k06/06.mp3

Convert files to supported file format

a=`find ./ -type f -name "*.mp3" | awk '{print "mv", "\""$0"\"", substr($0, 3, 2)".mp3;"}'`; eval $a

This only works if the files are named with the first 2 digits indicating their track name already. I.e. 01-meshuggah-bleed.mp3. A great alternative for batch renaming the files is Mp3Tag.

Auto resume

The player will automatically resume the last played track after power off (if powered off before an album finished playing).

Power saving

To remind the user to turn of the device once the album has finished playing the player will sound a short beep every 5 minutes once the last album has played.

Mono mode

To keep the player compact and reduce power consumption this has been designed to work with a single speaker. The Music Maker shield is configured to work in mono mode. You can connect your speaker to either of the 2 speaker ports. In case you want to build a stereo version you can simply remove these lines from player.cpp

// Enable mono mode
vs1053.sciWrite(VS1053_REG_WRAMADDR, 0x1e09);
vs1053.sciWrite(VS1053_REG_WRAM, 0x0001);

Case build

I added an album of the full build on Imgur