DEVELOPERS

This file aims to describe an introduction for developers to work on the code base of radare2 project.

Documentation

There is support for Doxygen document generation in this repo. By running doxygen in the root of this repository, it will autodetect the Doxyfile and generate HTML documentation into doc/doxygen/html/index.html

If you're contributing code or willing to update existing code, you can use the doxygen C-style comments to improve documentation and comments in code. See the Doxygen Manual for more info. Example usage can be found here

/**
 * \brief Find the min and max addresses in an RList of maps.
 * \param maps RList of maps that will be searched through
 * \param min Pointer to a ut64 that the min will be stored in
 * \param max Pointer to a ut64 that the max will be stored in
 * \param skip How many maps to skip at the start of an iteration
 * \param width Divisor for the return value
 * \return (max-min)/width
 *
 * Used to determine the min & max addresses of maps and
 * scale the ascii bar to the width of the terminal
 */
static int findMinMax(RList *maps, ut64 *min, ut64 *max, int skip, int width);

Code style

C

In order to contribute with patches or plugins, we encourage you to use the same coding style as the rest of the code base.

Please use ./sys/clang-format-diff.py before submitting a PR to be sure you are following the coding style. If you find a bug in this script, please create an issue on GitHub. You can also install the pre-commit hook ./sys/pre-commit-indent.sh by copying it in .git/hooks/pre-commit which will check the coding style of the modified lines before committing them.

You may find some additional notes on this topic in doc/vim.

Tabs are used for indentation. In a switch statement, the cases are indented at the switch level.
Switch-cases where local variables are needed should be refactored into separate functions instead of using braces. Even so, if braced scope syntax is used, put break; statement inside the scope.

switch (n) {
case 1:
	break;
case 2: {
	break;
}
default:
}

Lines should be at most 78 chars. A tab is considered as 8 chars.
Braces open on the same line as the for/while/if/else/function/etc. Closing braces are put on a line of their own, except in the else of an if statement or in a while of a do-while statement. Always use braces for if and while.

if (a == b) {
	...
}

if (a == b) {
	...
} else if (a > b) {
	...
}

if (a == b) {
	...
} else {
	do_something_else ();
}

do {
	do_something ();
} while (cond);

if (a == b) {
	b = 3;
}

In general, don't use goto. The goto statement only comes in handy when a function exits from multiple locations and some common work such as cleanup has to be done. If there is no cleanup needed, then just return directly.

Choose label names which say what the goto does or why the goto exists. An example of a good name could be "out_buffer:" if the goto frees "buffer". Avoid using GW-BASIC names like "err1:" and "err2:".
Use r_return_* macros to check preconditions that are caused by programmers' errors. Please, keep in mind:
- conditions that should never happen should be handled through r_return_* macros;
- runtime conditions (e.g. malloc returns NULL, input coming from user, etc.) should be handled in the usual way through if-else.

int check(RCore *c, int a, int b) {
	r_return_val_if_fail (c, false);
	r_return_val_if_fail (a >= 0, b >= 1, false);

	if (a == 0) {
		/* do something */
		...
	}
	... /* do something else */
}

Use a space after most of the keyword and around operators.

a = b + 3;
a = (b << 3) * 5;

Multiline ternary operator conditionals must be indented a-la JS way:

- ret = over ?
-         r_debug_step_over (dbg, 1) :
-         r_debug_step (dbg, 1);
+ ret = over
+         ? r_debug_step_over (dbg, 1)
+         : r_debug_step (dbg, 1);

Split long conditional expressions into small static inline functions to make them more readable:

+static inline bool inRange(RBreakpointItem *b, ut64 addr) {
+       return (addr >= b->addr && addr < (b->addr + b->size));
+}
+
+static inline bool matchProt(RBreakpointItem *b, int rwx) {
+       return (!rwx || (rwx && b->rwx));
+}
+
 R_API RBreakpointItem *r_bp_get_in(RBreakpoint *bp, ut64 addr, int rwx) {
        RBreakpointItem *b;
        RListIter *iter;
        r_list_foreach (bp->bps, iter, b) {
-               if (addr >= b->addr && addr < (b->addr+b->size) && \
-                       (!rwx || rwx&b->rwx))
+               if (inRange (b, addr) && matchProt (b, rwx)) {
                        return b;
+               }
        }
        return NULL;
 }

Structure in the C files

The structure of the C files in r2 must be like this:

/* Copyright ... */           ## copyright
#include <r_core.h>           ## includes
static int globals            ## const, define, global variables
static void helper(void) {}   ## static functions
R_IPI void internal(void) {}  ## internal apis (used only inside the library)
R_API void public(void) {}    ## public apis starting with constructor/destructor

Why return int vs enum

The reason why many places in r2land functions return int instead of an enum type is because enums can't be OR'ed; otherwise, it breaks the usage within a switch statement and swig can't handle that stuff.

r_core_wrap.cxx:28612:60: error: assigning to 'RRegisterType' from incompatible type 'long'
  arg2 = static_cast< long >(val2); if (arg1) (arg1)->type = arg2; resultobj = SWIG_Py_Void(); return resultobj; fail:
                                                           ^ ~~~~
r_core_wrap.cxx:32103:61: error: assigning to 'RDebugReasonType' from incompatible type 'int'
    arg2 = static_cast< int >(val2); if (arg1) (arg1)->type = arg2; resultobj = SWIG_Py_Void(); return resultobj; fail:
                                                            ^ ~~~~
3 warnings and 2 errors generated.

Do not leave trailing whitespaces at the end of line
Do not use assert.h, use r_util/r_assert.h instead.
You can use export R2_DEBUG_ASSERT=1 to set a breakpoint when hitting an assert.
Do not use C99 variable declaration
- This way we reduce the number of local variables per function and it's easier to find which variables are used, where and so on.
Always put a space before every parenthesis (function calls, conditionals, fors, etc, ...) except when defining the function signature. This is useful for grepping.
Function names should be explicit enough to not require a comment explaining what it does when seen elsewhere in code.
Use 'R_API' define to mark exportable (public) methods only for module APIs
The rest of functions must be static, to avoid polluting the global space.
Avoid using global variables, they are evil. Only use them for singletons and WIP code, placing a comment explaining the reason for them to stay there.
If you really need to comment out some code, use #if 0 (...) #endif. In general, don't comment out code because it makes the code less readable.
Do not write ultra-large functions: split them into multiple or simplify the algorithm, only external-copy-pasted-not-going-to-be-maintained code can be accepted in this way (gnu code, external disassemblers, etc..)
See sys/indent.sh for indenting your code automatically
See doc/vim for vimrc
See .clang-format for work-in-progress support for automated indentation
Use the r2 types instead of the ones in stdint, which are known to cause some portability issues. So, instead of uint8_t, use ut8, etc..
Never ever use %lld or %llx. This is not portable. Always use the PFMT64x macros. Those are similar to the ones in GLIB.

Shell Scripts

Use #!/bin/sh
Do not use bashisms [[, $'...' etc.
Use our shellcheck.sh script to check for problems and for bashisms

Manage Endianness

As hackers, we need to be aware of endianness.

Endianness can become a problem when you try to process buffers or streams of bytes and store intermediate values as integers with width larger than a single byte.

It can seem very easy to write the following code:

ut8 opcode[4] = {0x10, 0x20, 0x30, 0x40};
ut32 value = *(ut32*)opcode;

... and then continue to use "value" in the code to represent the opcode.

This needs to be avoided!

Why? What is actually happening?

When you cast the opcode stream to a unsigned int, the compiler uses the endianness of the host to interpret the bytes and stores it in host endianness. This leads to very unportable code, because if you compile on a different endian machine, the value stored in "value" might be 0x40302010 instead of 0x10203040.

Solution

Use bitshifts and OR instructions to interpret bytes in a known endian. Instead of casting streams of bytes to larger width integers, do the following:

ut8 opcode[4] = {0x10, 0x20, 0x30, 0x40};
ut32 value = opcode[0] | opcode[1] << 8 | opcode[2] << 16 | opcode[3] << 24;

or if you prefer the other endian:

ut32 value = opcode[3] | opcode[2] << 8 | opcode[1] << 16 | opcode[0] << 24;

This is much better because you actually know which endian your bytes are stored in within the integer value, REGARDLESS of the host endian of the machine.

Endian helper functions

Radare2 now uses helper functions to interpret all byte streams in a known endian.

Please use these at all times, eg:

val32 = r_read_be32(buffer)         // reads 4 bytes from a stream in BE
val32 = r_read_le32(buffer)         // reads 4 bytes from a stream in LE
val32 = r_read_ble32(buffer, isbig) // reads 4 bytes from a stream:
                                    //   if isbig is true, reads in BE
                                    //   otherwise reads in LE

There are a number of helper functions for 64, 32, 16, and 8 bit reads and writes.

(Note that 8 bit reads are equivalent to casting a single byte of the buffer to a ut8 value, ie endian is irrelevant).

Editor configuration

Vim/Neovim:

setl cindent
setl tabstop=8
setl noexpandtab
setl cino=:0,+0,(2,J0,{1,}0,>8,)1,m1

Emacs:

(c-add-style "radare2"
             '((c-basic-offset . 8)
               (tab-width . 8)
               (indent-tabs-mode . t)
               ;;;; You would need (put 'c-auto-align-backslashes 'safe-local-variable 'booleanp) to enable this
               ;; (c-auto-align-backslashes . nil)
               (c-offsets-alist
                (arglist-intro . ++)
                (arglist-cont . ++)
                (arglist-cont-nonempty . ++)
                (statement-cont . ++)
                )))

You may use directory-local variables by putting

((c-mode .  ((c-file-style . "radare2"))))

into .dir-locals.el.

Packed structures

Due to the various differences between platforms and compilers radare2 has a special helper macro - R_PACKED(). Instead of non-portable #pragma pack or __attribute__((packed)) it is advised to use this macro instead. To wrap the code inside of it you just need to write:

R_PACKED (union mystruct {
	int a;
	char b;
})

or in case of typedef:

R_PACKED (typedef structmystruct {
	int a;
	char b;
})

Modules

The radare2 code base is modularized into different libraries that are found in libr/ directory. The binr/ directory contains the programs which use the libraries.

It is possible to generate PIC/nonPIC builds of the libraries and also to create a single static library so you can use a single library archive (.a) to link your programs and get your programs using radare framework libraries without depending on them. See doc/static for more info.

The following presentation gives a good overview of the libraries:

http://radare.org/get/lacon-radare-2009/

API

As mentioned in README.md, the API itself is maintained in a different repository. The API function definitions in C header files are derived from and documented in the radare2-bindings repository, found at:

git clone git://github.com/radareorg/radare2-bindings

Currently the process of updating the header files from changed API bindings requires human intervention, to ensure that proper review occurs. Incorrect definitions in the C header files will trigger a build failure in the bindings repository.

If you are able to write a plugin for various IDE that can associate the bindings with the header files, such a contribution would be very welcome.

Dependencies

radare2 can be built without any special dependency. It just requires a C compiler, a GNU make and a unix-like system.

Cross compilation

The instructions to crosscompile r2 to Windows are in doc/windows.

You may find other documents in doc/ explaining how to build it on iOS, linux-arm and others, but the procedure is like this:

define CC
use a different compiler profile with --with-compiler
use a different OS with --with-ostype
type make
install in DESTDIR

Source repository

The source of radare2 can be found in the following GitHub repository.

git clone git://github.com/radareorg/radare2

Other packages radare2 depends on, such as Capstone, are pulled from their git repository as required.

To get an up-to-date copy of the repository, you should perform the following steps:

git pull

If you have conflicts in your local copy, it's because you have modified files which are conflicting with the incoming patchsets. To get a clean source directory, type the following command:

git clean -xdf
git reset --hard

Compilation

Inter-module rebuild dependencies are not handled automatically and require human interaction to recompile the affected modules.

This is a common issue and can end up having outdated libraries trying to use deprecated structures which may result into segfaults.

You have to make clean on the affected modules. If you are not sure enough that everything is OK, just make clean the whole project.

If you want to accelerate the build process after full make cleans, you should use ccache in this way:

  export CC="ccache gcc"

Installation

Developers use to modify the code, type make and then try.

radare2 has a specific makefile target that allows you to install system wide but using symlinks instead of hard copies.

sudo make symstall

This kind of installation is really helpful if you do lot of changes in the code for various reasons.

only one install is required across multiple builds
installation time is much faster

Regression testing

The source of the radare2 regression test suite can be found in the test/ directory, while binaries for this test are located in the following GitHub repository.

git clone git://github.com/radareorg/radare2-testbins

See the README.md file in that repository for further information.

The existing test coverage can always do with improvement. So if you can contribute additional tests, that would be gratefully accepted.

Reporting bugs

If you notice any misfeature, issue, error, problem or you just don't know how to do something which is supposed to be covered by this framework.

You should report it into the GitHub issues page. https://github.com/radareorg/radare2/issues

Otherwise, if you are looking for some more feedback, I will encourage you to send an email to any of the emails enumerated in the AUTHORS file.

Anyway, if you want to get even more feedback and discuss this in a public place: join the #radare channel on irc.freenode.net.

The issues page of GitHub contains a list of all the bugs that have been reported classified with labels by difficulty, type, milestone, etc. It is a good place to start if you are looking to contribute.

HOW TO RELEASE

Set RELEASE=1 in global.mk and r2-bindings/config.mk.acr.
Use bsdtar from libarchive package. GNU tar is broken.

RADARE2

bump revision
./configure
make dist

R2-BINDINGS

./configure --enable-devel
make
make dist
Update the paths on the website

--pancake

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

DEVELOPERS.md

DEVELOPERS.md

DEVELOPERS

Documentation

Code style

C

Shell Scripts

Manage Endianness

Solution

Endian helper functions

Editor configuration

Packed structures

Modules

API

Dependencies

Cross compilation

Source repository

Compilation

Installation

Regression testing

Reporting bugs

HOW TO RELEASE

RADARE2

R2-BINDINGS

Files

DEVELOPERS.md

Latest commit

History

DEVELOPERS.md

File metadata and controls

DEVELOPERS

Documentation

Code style

C

Shell Scripts

Manage Endianness

Solution

Endian helper functions

Editor configuration

Packed structures

Modules

API

Dependencies

Cross compilation

Source repository

Compilation

Installation

Regression testing

Reporting bugs

HOW TO RELEASE

RADARE2

R2-BINDINGS