Vista 15P #114
Replies: 18 comments 4 replies
-
log file ...
|
Beta Was this translation helpful? Give feedback.
-
|
That’s an innocuous message and can be ignored.Best,RebeccaOn Nov 12, 2023, at 17:37, crumbliness ***@***.***> wrote:
log file ...
INFO ESPHome 2023.10.6
INFO Reading configuration /config/vistaalarm.yaml...
INFO Detected timezone 'America/New_York'
INFO Generating C++ source...
INFO Compiling app...
Processing vistaalarm (board: nodemcu-32s; framework: arduino; platform: ***@***.***)
Library Manager: Installing esphome/noise-c @ 0.1.4
INFO Installing esphome/noise-c @ 0.1.4
Unpacking [####################################] 100%
Library Manager: ***@***.*** has been installed!
INFO ***@***.*** has been installed!
Library Manager: Resolving dependencies...
INFO Resolving dependencies...
Library Manager: Installing esphome/libsodium @ 1.10018.1
INFO Installing esphome/libsodium @ 1.10018.1
Unpacking [####################################] 100%
Library Manager: ***@***.*** has been installed!
INFO ***@***.*** has been installed!
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
Dependency Graph
|-- WiFi @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- Update @ 2.0.0
|-- noise-c @ 0.1.4
Compiling .pioenvs/vistaalarm/src/esphome/components/api/api_connection.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/api/api_frame_helper.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/api/api_pb2.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/api/api_pb2_service.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/api/api_server.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/api/list_entities.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/api/proto.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/api/subscribe_state.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/api/user_services.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/binary_sensor/automation.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/binary_sensor/binary_sensor.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/binary_sensor/filter.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/debug/debug_component.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/esp32/core.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/esp32/gpio.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/esp32/preferences.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/logger/logger.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/md5/md5.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/mdns/mdns_component.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/mdns/mdns_esp32.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/mdns/mdns_esp8266.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/mdns/mdns_host.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/mdns/mdns_libretiny.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/mdns/mdns_rp2040.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/network/util.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/ota/ota_backend_arduino_esp32.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/ota/ota_backend_arduino_esp8266.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/ota/ota_backend_arduino_libretiny.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/ota/ota_backend_arduino_rp2040.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/ota/ota_backend_esp_idf.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/ota/ota_component.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/restart/switch/restart_switch.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/safe_mode/switch/safe_mode_switch.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/sensor/automation.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/sensor/filter.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/sensor/sensor.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/sntp/sntp_component.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/socket/bsd_sockets_impl.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/socket/lwip_raw_tcp_impl.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/socket/lwip_sockets_impl.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/socket/socket.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/status_led/status_led.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/switch/automation.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/switch/switch.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/template/binary_sensor/template_binary_sensor.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/template/switch/template_switch.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/template/text_sensor/template_text_sensor.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/text_sensor/filter.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/text_sensor/text_sensor.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/time/automation.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/time/real_time_clock.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/vista_alarm_panel/ECPSoftwareSerial.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/vista_alarm_panel/vista.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/wifi/wifi_component.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/wifi/wifi_component_esp32_arduino.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/wifi/wifi_component_esp8266.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/wifi/wifi_component_esp_idf.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/wifi/wifi_component_libretiny.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/components/wifi/wifi_component_pico_w.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/application.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/color.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/component.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/component_iterator.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/controller.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/entity_base.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/helpers.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/log.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/scheduler.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/string_ref.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/time.cpp.o
Compiling .pioenvs/vistaalarm/src/esphome/core/util.cpp.o
Compiling .pioenvs/vistaalarm/src/main.cpp.o
Building .pioenvs/vistaalarm/bootloader.bin
Generating partitions .pioenvs/vistaalarm/partitions.bin
Creating esp32 image...
Successfully created esp32 image.
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFi.cpp.o
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFiAP.cpp.o
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFiClient.cpp.o
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFiGeneric.cpp.o
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFiMulti.cpp.o
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFiSTA.cpp.o
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFiScan.cpp.o
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFiServer.cpp.o
Compiling .pioenvs/vistaalarm/lib789/WiFi/WiFiUdp.cpp.o
Compiling .pioenvs/vistaalarm/libe94/ESPmDNS/ESPmDNS.cpp.o
Compiling .pioenvs/vistaalarm/liba61/Update/HttpsOTAUpdate.cpp.o
Archiving .pioenvs/vistaalarm/lib789/libWiFi.a
Indexing .pioenvs/vistaalarm/lib789/libWiFi.a
Compiling .pioenvs/vistaalarm/liba61/Update/Updater.cpp.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_aead/chacha20poly1305/sodium/aead_chacha20poly1305.c.o
Archiving .pioenvs/vistaalarm/libe94/libESPmDNS.a
Indexing .pioenvs/vistaalarm/libe94/libESPmDNS.a
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_core/ed25519/core_ed25519.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_core/ed25519/core_ristretto255.c.o
Archiving .pioenvs/vistaalarm/liba61/libUpdate.a
Indexing .pioenvs/vistaalarm/liba61/libUpdate.a
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_core/ed25519/ref10/ed25519_ref10.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_hash/crypto_hash.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_hash/sha256/cp/hash_sha256_cp.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_hash/sha256/hash_sha256.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_onetimeauth/crypto_onetimeauth.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_onetimeauth/poly1305/donna/poly1305_donna.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_onetimeauth/poly1305/onetimeauth_poly1305.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_scalarmult/crypto_scalarmult.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_scalarmult/curve25519/ref10/x25519_ref10.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_scalarmult/curve25519/scalarmult_curve25519.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_stream/chacha20/ref/chacha20_ref.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_stream/chacha20/stream_chacha20.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_stream/crypto_stream.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/crypto_verify/sodium/verify.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/sodium/codecs.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/sodium/core.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/sodium/runtime.c.o
Compiling .pioenvs/vistaalarm/libc5a/libsodium/sodium/utils.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/openssl/cipher-aesgcm.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/ref/cipher-aesgcm.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/ref/cipher-chachapoly.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/ref/dh-curve25519.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/ref/hash-blake2b.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/ref/hash-blake2s.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/ref/hash-sha256.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/sodium/cipher-aesgcm.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/sodium/cipher-chachapoly.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/sodium/dh-curve25519.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/sodium/hash-blake2b.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/backend/sodium/hash-sha256.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/aes/rijndael-alg-fst.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/blake2/blake2b.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/blake2/blake2s.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/chacha/chacha.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/donna/curve25519-donna-c64.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/donna/curve25519-donna.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/donna/poly1305-donna.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/sha2/sha256.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/sha2/sha512.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/crypto/x25519/x25519.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/cipherstate.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/dhstate.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/errors.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/handshakestate.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/hashstate.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/internal.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/names.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/patterns.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/rand_os.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/rand_sodium.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/randstate.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/signstate.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/symmetricstate.c.o
Compiling .pioenvs/vistaalarm/lib716/noise-c/protocol/util.c.o
Archiving .pioenvs/vistaalarm/libc5a/libsodium.a
Indexing .pioenvs/vistaalarm/libc5a/libsodium.a
Compiling .pioenvs/vistaalarm/FrameworkArduino/Esp.cpp.o
Archiving .pioenvs/vistaalarm/lib716/libnoise-c.a
Compiling .pioenvs/vistaalarm/FrameworkArduino/FirmwareMSC.cpp.o
Indexing .pioenvs/vistaalarm/lib716/libnoise-c.a
Compiling .pioenvs/vistaalarm/FrameworkArduino/FunctionalInterrupt.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/HWCDC.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/HardwareSerial.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/IPAddress.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/IPv6Address.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/MD5Builder.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/Print.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/Stream.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/StreamString.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/Tone.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/USB.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/USBCDC.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/USBMSC.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/WMath.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/WString.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/base64.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/cbuf.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-adc.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-bt.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-cpu.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-dac.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-gpio.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-i2c-slave.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-i2c.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-ledc.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-matrix.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-misc.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-psram.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-rgb-led.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-rmt.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-sigmadelta.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-spi.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-time.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-timer.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-tinyusb.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-touch.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/esp32-hal-uart.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/firmware_msc_fat.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/libb64/cdecode.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/libb64/cencode.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/main.cpp.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/stdlib_noniso.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/wiring_pulse.c.o
Compiling .pioenvs/vistaalarm/FrameworkArduino/wiring_shift.c.o
Archiving .pioenvs/vistaalarm/libFrameworkArduino.a
Indexing .pioenvs/vistaalarm/libFrameworkArduino.a
Linking .pioenvs/vistaalarm/firmware.elf
RAM: [= ] 12.7% (used 41564 bytes from 327680 bytes)
Flash: [===== ] 51.8% (used 950221 bytes from 1835008 bytes)
Building .pioenvs/vistaalarm/firmware.bin
Creating esp32 image...
Successfully created esp32 image.
esp32_create_combined_bin([".pioenvs/vistaalarm/firmware.bin"], [".pioenvs/vistaalarm/firmware.elf"])
Wrote 0xf9660 bytes to file /config/.esphome/build/vistaalarm/.pioenvs/vistaalarm/firmware-factory.bin, ready to flash to offset 0x0
======================== [SUCCESS] Took 182.18 seconds ========================
INFO Successfully compiled program.
INFO Resolving IP address of vistaalarm.local
INFO -> 192.168.1.186
INFO Uploading /config/.esphome/build/vistaalarm/.pioenvs/vistaalarm/firmware.bin (956000 bytes)
Uploading: [============================================================] 100% Done...
INFO Waiting for result...
INFO OTA successful
INFO Successfully uploaded program.
INFO Starting log output from vistaalarm.local using esphome API
WARNING Can't connect to ESPHome API for vistaalarm.local: Error resolving IP address: [Errno -2] Name or service not known (APIConnectionError)
INFO Trying to connect to vistaalarm.local in the background
INFO Successfully connected to vistaalarm.local
[16:53:37][I][app:102]: ESPHome version 2023.10.6 compiled on Nov 12 2023, 16:52:01
[16:53:37][C][status_led:019]: Status LED:
[16:53:37][C][status_led:020]: Pin: GPIO2
[16:53:37][C][wifi:546]: WiFi:
[16:53:37][C][wifi:382]: Local MAC: E0:5A:1B:AC:63:9C
[16:53:37][C][wifi:383]: SSID: 'wireless2'[redacted]
[16:53:37][C][wifi:384]: IP Address: 192.168.1.186
[16:53:37][C][wifi:386]: BSSID: 6A:ED:00:6D:36:64[redacted]
[16:53:37][C][wifi:387]: Hostname: 'vistaalarm'
[16:53:37][C][wifi:389]: Signal strength: -52 dB ▂▄▆█
[16:53:37][C][wifi:393]: Channel: 8
[16:53:37][C][wifi:394]: Subnet: 255.255.255.0
[16:53:37][C][wifi:395]: Gateway: 192.168.1.1
[16:53:37][C][wifi:396]: DNS1: 192.168.1.2
[16:53:37][C][wifi:397]: DNS2: 192.168.1.1
[16:53:37][C][logger:416]: Logger:
[16:53:37][C][logger:417]: Level: DEBUG
[16:53:37][C][logger:418]: Log Baud Rate: 115200
[16:53:37][C][logger:420]: Hardware UART: UART0
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Garage door (z1)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'door'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Master Bedroom (z2)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'door'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Lanai doors (z3)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'door'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Guest room windows (z4)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'window'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Garage side door, Laundry & Office windows (z5)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'window'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Great room motion (z6)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'window'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Family room window RF (z7)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'window'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Front Door (z9)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'door'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'zone 10 (z10)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'window'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'zone 17 (z17)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'window'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'check relay 12 (z112)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'problem'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'check expander 08 (z108)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'problem'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'check comm device (z103)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'problem'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Ready (rdy_1)'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Ready (rdy_2)'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Trouble (trbl_1)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'problem'
[16:53:37][C][template.binary_sensor:028]: Template Binary Sensor 'Trouble (trbl_2)'
[16:53:37][C][template.binary_sensor:028]: Device Class: 'problem'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Bypass (byp_1)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Bypass (byp_2)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Away (arma_1)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Away (arma_2)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Armed (arm_1)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Armed (arm_2)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Stay (arms_1)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Stay (arms_2)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Instant (armi_1)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Instant (armi_2)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Night (armn_1)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Instant (armi_2)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'AC (ac)'
[16:53:38][C][template.binary_sensor:028]: Device Class: 'plug'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Chime (chm_1)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Chime (chm_2)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Alarm (alm_1)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Alarm (alm_2)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Battery (bat)'
[16:53:38][C][template.binary_sensor:028]: Device Class: 'problem'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Fire (fire_1)'
[16:53:38][C][template.binary_sensor:028]: Device Class: 'smoke'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Fire (fire_2)'
[16:53:38][C][template.binary_sensor:028]: Device Class: 'smoke'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Relay1 (r121)'
[16:53:38][C][template.binary_sensor:028]: Template Binary Sensor 'Relay2 (r122)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'zone 1 test (z1)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'System Status (ss_1)'
[16:53:38][C][template.text_sensor:020]: Icon: 'mdi:shield'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'System Status (ss_2)'
[16:53:38][C][template.text_sensor:020]: Icon: 'mdi:shield'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Lrr Msg (lrr)'
[16:53:38][C][template.text_sensor:020]: Icon: 'mdi:alert-box'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'RF Msg (rf)'
[16:53:38][C][template.text_sensor:020]: Icon: 'mdi:alert-box'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Line1 (ln1_1)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Line2 (ln2_1)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Line1 (ln1_2)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Line2 (ln2_2)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Line1 (ln1_3)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Line2 (ln2_3)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Zone Status (zs)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Beeps (bp_1)'
[16:53:38][C][template.text_sensor:020]: Template Sensor 'Beeps (bp_2)'
[16:53:38][C][template.switch:068]: Template Switch 'vistaalarm Connection'
[16:53:38][C][template.switch:070]: Icon: 'mdi:shield-link-variant'
[16:53:38][C][template.switch:091]: Restore Mode: always OFF
[16:53:38][C][template.switch:057]: Optimistic: NO
[16:53:38][C][restart:068]: Restart Switch 'restart_switch'
[16:53:38][C][restart:070]: Icon: 'mdi:restart'
[16:53:38][C][restart:091]: Restore Mode: always OFF
[16:53:38][C][safe_mode_switch:068]: Safe Mode Switch 'Safe Mode'
[16:53:38][C][safe_mode_switch:070]: Icon: 'mdi:restart-alert'
[16:53:38][C][safe_mode_switch:091]: Restore Mode: always OFF
[16:53:38][C][sntp:053]: SNTP Time:
[16:53:38][C][sntp:054]: Server 1: '0.pool.ntp.org'
[16:53:38][C][sntp:055]: Server 2: '1.pool.ntp.org'
[16:53:38][C][sntp:056]: Server 3: '2.pool.ntp.org'
[16:53:38][C][sntp:057]: Timezone: 'EST5EDT,M3.2.0,M11.1.0'
[16:53:38][C][mdns:115]: mDNS:
[16:53:38][C][mdns:116]: Hostname: vistaalarm
[16:53:38][C][ota:097]: Over-The-Air Updates:
[16:53:38][C][ota:098]: Address: vistaalarm.local:3232
[16:53:38][C][api:139]: API Server:
[16:53:38][C][api:140]: Address: vistaalarm.local:6053
[16:53:38][C][api:142]: Using noise encryption: YES
[16:53:38][C][debug:064]: Debug component:
[16:53:38][C][debug:069]: Free space on heap 'Heap Free'
[16:53:38][C][debug:069]: State Class: ''
[16:53:38][C][debug:069]: Unit of Measurement: 'B'
[16:53:38][C][debug:069]: Accuracy Decimals: 0
[16:53:38][C][debug:069]: Icon: 'mdi:counter'
[16:53:38][C][debug:070]: Largest free heap block 'Heap Max Block'
[16:53:38][C][debug:070]: State Class: ''
[16:53:38][C][debug:070]: Unit of Measurement: 'B'
[16:53:38][C][debug:070]: Accuracy Decimals: 0
[16:53:38][C][debug:070]: Icon: 'mdi:counter'
[16:53:38][D][debug:076]: ESPHome version 2023.10.6
[16:53:38][D][debug:080]: Free Heap Size: 209804 bytes
[16:53:38][D][debug:110]: Flash Chip: Size=4096kB Speed=40MHz Mode=DIO
[16:53:38][D][debug:159]: Chip: Model=ESP32, Features=WIFI_BGN,BLE,BT, Cores=2, Revision=3
[16:53:38][D][debug:167]: ESP-IDF Version: v4.4.2
[16:53:38][D][debug:172]: EFuse MAC: E0:5A:1B:AC:63:9C
[16:53:38][D][debug:272]: Reset Reason: Software Reset CPU
[16:53:38][D][debug:317]: Wakeup Reason: Unknown
[16:53:40][E][CMD:753]: 2023-11-12 16:53 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:53:40][E][INFO:1074]: Display to partition: 01
[16:53:40][E][INFO:1101]: Prompt: DISARMED
[16:53:40][E][INFO:1102]: Prompt: Ready to Arm
[16:53:40][E][INFO:1103]: Beeps: 0
[16:53:40][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.14 s).
[16:53:40][W][component:215]: Components should block for at most 20-30ms.
[16:53:50][E][CMD:753]: 2023-11-12 16:53 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:53:50][E][INFO:1074]: Display to partition: 01
[16:53:50][E][INFO:1101]: Prompt: DISARMED
[16:53:50][E][INFO:1102]: Prompt: Ready to Arm
[16:53:50][E][INFO:1103]: Beeps: 0
[16:53:50][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.13 s).
[16:53:50][W][component:215]: Components should block for at most 20-30ms.
[16:53:51][E][CMD:753]: 2023-11-12 16:53 FB 02 20 81 62 00 00 00 00 00 00 00 00
[16:53:51][E][EXT:753]: 2023-11-12 16:53 00 24 00 DC 00 00 00 00 00 00 00 00 74
[16:53:52][E][CMD:753]: 2023-11-12 16:53 FB 02 25 82 5C 00 00 00 00 00 00 00 00
[16:53:52][E][EXT:753]: 2023-11-12 16:53 00 21 03 DC 00 00 00 00 00 00 00 00 74
[16:54:00][E][CMD:753]: 2023-11-12 16:54 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:54:00][E][INFO:1074]: Display to partition: 01
[16:54:00][E][INFO:1101]: Prompt: DISARMED
[16:54:00][E][INFO:1102]: Prompt: Ready to Arm
[16:54:00][E][INFO:1103]: Beeps: 0
[16:54:00][D][text_sensor:064]: 'Lrr Msg (lrr)': Sending state ''
[16:54:00][D][text_sensor:064]: 'RF Msg (rf)': Sending state ''
[16:54:00][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.15 s).
[16:54:00][W][component:215]: Components should block for at most 20-30ms.
[16:54:10][E][CMD:753]: 2023-11-12 16:54 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:54:10][E][INFO:1074]: Display to partition: 01
[16:54:10][E][INFO:1101]: Prompt: DISARMED
[16:54:10][E][INFO:1102]: Prompt: Ready to Arm
[16:54:10][E][INFO:1103]: Beeps: 0
[16:54:10][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.14 s).
[16:54:10][W][component:215]: Components should block for at most 20-30ms.
[16:54:20][E][CMD:753]: 2023-11-12 16:54 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:54:20][E][INFO:1074]: Display to partition: 01
[16:54:20][E][INFO:1101]: Prompt: DISARMED
[16:54:20][E][INFO:1102]: Prompt: Ready to Arm
[16:54:20][E][INFO:1103]: Beeps: 0
[16:54:20][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.14 s).
[16:54:20][W][component:215]: Components should block for at most 20-30ms.
[16:54:23][E][CMD:753]: 2023-11-12 16:54 FB 02 20 81 62 00 00 00 00 00 00 00 00
[16:54:23][E][EXT:753]: 2023-11-12 16:54 00 24 00 DC 00 00 00 00 00 00 00 00 74
[16:54:24][E][CMD:753]: 2023-11-12 16:54 FB 02 25 7C 62 00 00 00 00 00 00 00 00
[16:54:24][E][EXT:753]: 2023-11-12 16:54 00 21 00 DF 00 00 00 00 00 00 00 00 74
[16:54:29][E][Debug:616]: Writing keys: 4 to partition 1
[16:54:30][E][CMD:753]: 2023-11-12 16:54 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:54:30][E][INFO:1074]: Display to partition: 01
[16:54:30][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'DISARMED'
[16:54:30][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state ' Ready to Arm '
[16:54:30][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '0'
[16:54:30][E][INFO:1101]: Prompt: DISARMED
[16:54:30][E][INFO:1102]: Prompt: Ready to Arm
[16:54:30][E][INFO:1103]: Beeps: 0
[16:54:30][D][text_sensor:064]: 'System Status (ss_1)': Sending state 'disarmed'
[16:54:30][D][binary_sensor:036]: 'Ready (rdy_1)': Sending state ON
[16:54:30][D][text_sensor:064]: 'Zone Status (zs)': Sending state ''
[16:54:30][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.19 s).
[16:54:30][W][component:215]: Components should block for at most 20-30ms.
[16:54:31][E][Debug:616]: Writing keys: 0 to partition 1
[16:54:33][E][Debug:616]: Writing keys: 4 to partition 1
[16:54:33][E][Debug:616]: Writing keys: 4 to partition 1
[16:54:35][E][Debug:616]: Writing keys: 3 to partition 1
[16:54:39][E][CMD:753]: 2023-11-12 16:54 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:54:39][E][INFO:1074]: Display to partition: 01
[16:54:39][E][INFO:1101]: Prompt: DISARMED
[16:54:39][E][INFO:1102]: Prompt: Ready to Arm
[16:54:39][E][INFO:1103]: Beeps: 0
[16:54:39][D][text_sensor:064]: 'Lrr Msg (lrr)': Sending state ''
[16:54:39][D][text_sensor:064]: 'RF Msg (rf)': Sending state ''
[16:54:39][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.16 s).
[16:54:39][W][component:215]: Components should block for at most 20-30ms.
[16:54:49][E][CMD:753]: 2023-11-12 16:54 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:54:49][E][INFO:1074]: Display to partition: 01
[16:54:49][E][INFO:1101]: Prompt: DISARMED
[16:54:49][E][INFO:1102]: Prompt: Ready to Arm
[16:54:49][E][INFO:1103]: Beeps: 0
[16:54:49][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.15 s).
[16:54:49][W][component:215]: Components should block for at most 20-30ms.
[16:54:55][E][CMD:753]: 2023-11-12 16:54 FB 02 20 81 62 00 00 00 00 00 00 00 00
[16:54:55][E][EXT:753]: 2023-11-12 16:54 00 24 00 DC 00 00 00 00 00 00 00 00 74
[16:54:56][E][CMD:753]: 2023-11-12 16:54 FB 02 25 82 5C 00 00 00 00 00 00 00 00
[16:54:56][E][EXT:753]: 2023-11-12 16:54 00 21 03 DC 00 00 00 00 00 00 00 00 74
[16:54:59][E][CMD:753]: 2023-11-12 16:54 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:54:59][E][INFO:1074]: Display to partition: 01
[16:54:59][E][INFO:1101]: Prompt: DISARMED
[16:54:59][E][INFO:1102]: Prompt: Ready to Arm
[16:54:59][E][INFO:1103]: Beeps: 0
[16:54:59][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.14 s).
[16:54:59][W][component:215]: Components should block for at most 20-30ms.
[16:55:05][E][Debug:616]: Writing keys: 4 to partition 1
[16:55:06][E][Debug:616]: Writing keys: 0 to partition 1
[16:55:07][E][Debug:616]: Writing keys: 4 to partition 1
[16:55:08][E][Debug:616]: Writing keys: 4 to partition 1
[16:55:09][E][CMD:753]: 2023-11-12 16:55 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:55:09][E][INFO:1074]: Display to partition: 01
[16:55:09][E][INFO:1101]: Prompt: DISARMED
[16:55:09][E][INFO:1102]: Prompt: Ready to Arm
[16:55:09][E][INFO:1103]: Beeps: 0
[16:55:09][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.14 s).
[16:55:09][W][component:215]: Components should block for at most 20-30ms.
[16:55:11][E][Debug:616]: Writing keys: 3 to partition 1
[16:55:19][E][CMD:753]: 2023-11-12 16:55 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:55:19][E][INFO:1074]: Display to partition: 01
[16:55:19][E][INFO:1101]: Prompt: DISARMED
[16:55:19][E][INFO:1102]: Prompt: Ready to Arm
[16:55:19][E][INFO:1103]: Beeps: 0
[16:55:19][D][text_sensor:064]: 'Lrr Msg (lrr)': Sending state ''
[16:55:19][D][text_sensor:064]: 'RF Msg (rf)': Sending state ''
[16:55:19][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.15 s).
[16:55:19][W][component:215]: Components should block for at most 20-30ms.
[16:55:27][E][CMD:753]: 2023-11-12 16:55 FB 02 20 81 62 00 00 00 00 00 00 00 00
[16:55:27][E][EXT:753]: 2023-11-12 16:55 00 24 00 DC 00 00 00 00 00 00 00 00 74
[16:55:28][E][CMD:753]: 2023-11-12 16:55 FB 02 25 7C 62 00 00 00 00 00 00 00 00
[16:55:28][E][EXT:753]: 2023-11-12 16:55 00 21 00 DF 00 00 00 00 00 00 00 00 74
[16:55:29][E][CMD:753]: 2023-11-12 16:55 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:55:29][E][INFO:1074]: Display to partition: 01
[16:55:29][E][INFO:1101]: Prompt: DISARMED
[16:55:29][E][INFO:1102]: Prompt: Ready to Arm
[16:55:29][E][INFO:1103]: Beeps: 0
[16:55:29][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.14 s).
[16:55:29][W][component:215]: Components should block for at most 20-30ms.
[16:55:39][E][CMD:753]: 2023-11-12 16:55 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:55:39][E][INFO:1074]: Display to partition: 01
[16:55:39][D][text_sensor:064]: 'Line1 (ln1_1)': Sending state 'DISARMED'
[16:55:39][D][text_sensor:064]: 'Line2 (ln2_1)': Sending state ' Ready to Arm '
[16:55:39][D][text_sensor:064]: 'Beeps (bp_1)': Sending state '0'
[16:55:39][E][INFO:1101]: Prompt: DISARMED
[16:55:39][E][INFO:1102]: Prompt: Ready to Arm
[16:55:39][E][INFO:1103]: Beeps: 0
[16:55:39][D][text_sensor:064]: 'System Status (ss_1)': Sending state 'disarmed'
[16:55:39][D][text_sensor:064]: 'Zone Status (zs)': Sending state ''
[16:55:39][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.20 s).
[16:55:39][W][component:215]: Components should block for at most 20-30ms.
[16:55:49][E][CMD:753]: 2023-11-12 16:55 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:55:49][E][INFO:1074]: Display to partition: 01
[16:55:49][E][INFO:1101]: Prompt: DISARMED
[16:55:49][E][INFO:1102]: Prompt: Ready to Arm
[16:55:49][E][INFO:1103]: Beeps: 0
[16:55:49][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.14 s).
[16:55:49][W][component:215]: Components should block for at most 20-30ms.
[16:55:54][E][Debug:616]: Writing keys: 4 to partition 1
[16:55:55][E][Debug:616]: Writing keys: 0 to partition 1
[16:55:56][E][Debug:616]: Writing keys: 4 to partition 1
[16:55:57][E][Debug:616]: Writing keys: 4 to partition 1
[16:55:58][E][Debug:616]: Writing keys: 3 to partition 1
[16:55:59][E][CMD:753]: 2023-11-12 16:55 F7 00 00 03 10 08 00 1C 08 02 00 00 2A
[16:55:59][E][INFO:1074]: Display to partition: 01
[16:55:59][E][INFO:1101]: Prompt: DISARMED
[16:55:59][E][INFO:1102]: Prompt: Ready to Arm
[16:55:59][E][INFO:1103]: Beeps: 0
[16:55:59][D][text_sensor:064]: 'Lrr Msg (lrr)': Sending state ''
[16:55:59][D][text_sensor:064]: 'RF Msg (rf)': Sending state ''
[16:55:59][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.14 s).
[16:55:59][W][component:215]: Components should block for at most 20-30ms.
[16:55:59][E][CMD:753]: 2023-11-12 16:55 FB 02 20 81 62 00 00 00 00 00 00 00 00
[16:55:59][E][EXT:753]: 2023-11-12 16:55 00 24 00 DC 00 00 00 00 00 00 00 00 74
[16:56:00][E][CMD:753]: 2023-11-12 16:56 FB 02 25 82 5C 00 00 00 00 00 00 00 00
[16:56:00][E][EXT:753]: 2023-11-12 16:56 00 21 03 DC 00 00 00 00 00 00 00 00 74
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
As far as I know the vista15 is fully supported. The FB cmds are panel cmds to the RF devices . The following EXT are responses from the RF devices themselves. I've never decoded those so can't say what they are. Those would be normal though. If your panel is not responding to keystrokes, I suspect you have a pin misconfiguration with the writepin. Either wrong pin or a physical issue with the wiring. Another issue is that the keypad address used in the yaml is not programmed in your panel. Try 16 or ensure the address you are using is setup. |
Beta Was this translation helpful? Give feedback.
-
|
Checked and double checked the physical wiring of the circuit board as well as the pins on the ESP device - no change. I've flashed the ESP with 2022 vistaECP code I had on a backup - no change. I also also breadboarded a completely new circuit board and ESP32 and assigned it to different address. The alarm panel does not respond to keystrokes. |
Beta Was this translation helpful? Give feedback.
-
|
And the keypad address you are using is programmed in the panel? |
Beta Was this translation helpful? Give feedback.
-
|
Yes - each has it's own address, 17 for the ESP8266 hardwired & 18 for the ESP32 on a breadboard. |
Beta Was this translation helpful? Give feedback.
-
|
Ok, about the address. I can't see what else it could be from the address config and a wiring issue. As to the took a long time for an operation, just ignore that. That's a new message that the newer esphome developers added. It times all components and issues that warning. Since I'm using a custom component , it's not affecting anything else as the esp is dedicated to this one thing and doesnt have to share too much time with other devices. You would not see that message if you have the logger set to "info" instead of "debug" |
Beta Was this translation helpful? Give feedback.
-
|
OK thanks, one less thing to chase down ... |
Beta Was this translation helpful? Give feedback.
-
|
Can you try using address 17 with the esp32 just to see if that's the issue? |
Beta Was this translation helpful? Give feedback.
-
|
Will do |
Beta Was this translation helpful? Give feedback.
-
|
It should have been easy - no longer able to compile vistaalarm.yaml INFO ESPHome 2023.11.0 external_components: [source /config/vistaalarm.yaml:80]This one is fixable if you follow the directions but deserve a mention in the readme when you get to it .... INFO ESPHome 2023.11.0
|
Beta Was this translation helpful? Give feedback.
-
|
Sorry, that's an esphome thing. I have no idea. i dont have issues here... Try doing a clean first. |
Beta Was this translation helpful? Give feedback.
-
|
The esphome clean option doesnt fix it, alternatively you can set the "clean_build:" option to true in the yaml. This will force a full clean of the build diretory. Once you compile it , go and change it back to "false" or it will do a full compile every time. |
Beta Was this translation helpful? Give feedback.
-
|
I've reverted ESPhome to 2023.6.5 and tried the "clean_build" option. Now able to compile again. .The ESP32 has been moved to "17" and the ESP8266 to "18". Both receive messages from the Vista 15p panel, but the panel still does not respond to either one even though I can see the keystrokes in the ESPHome logs. |
Beta Was this translation helpful? Give feedback.
-
|
BTW the 6160RF keypad works as expected. |
Beta Was this translation helpful? Give feedback.
-
|
Honestly I'm at a loss as no one has has issues with sending. I'm using the latest esphome as well. Like I said usually it's because those keypad addresses are either not programed in *190-*196 programs or there is something odd with the pinout config or wiring. |
Beta Was this translation helpful? Give feedback.
-
|
Me too. I'll take a fresh look again in a couple of weeks. Thanks,
…On Thu, Nov 16, 2023, 11:39 AM Alain Turbide ***@***.***> wrote:
Honestly I'm at a loss as no one has has issues with sending. I'm using
the latest esphome as well. Like I said usually it's because those keypad
addresses are either not programed in *190-*196 programs or there is
something odd with the pinout config or wiring.
—
Reply to this email directly, view it on GitHub
<#114 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ANYP7ACPEGDOLAC6M5ZZ3M3YEY6URAVCNFSM6AAAAAA7IKAL5CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKOJQGI2DQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Can you post your keypads config from the yaml? Also your rxpin,rxpin |
Beta Was this translation helpful? Give feedback.
-
|
Here it is ...
type: custom:alarm-keypad-card
title: House Alarm
unique_id: vista1
disp_line1: sensor.vistaalarm_line1_ln1_1
disp_line2: sensor.vistaalarm_line2_ln2_1
scale: 1
service_type: esphome
service: vistaalarm_alarm_keypress_partition
status_A: AWAY
status_B: STAY
status_C: READY
status_D: BYPASS
status_E: TROUBLE
status_F: CHIME
status_G: ''
status_H: ''
sensor_A: binary_sensor.vistaalarm_away_arma_1
sensor_B: binary_sensor.vistaalarm_stay_arms_1
sensor_C: binary_sensor.vistaalarm_ready_rdy_1
sensor_D: binary_sensor.vistaalarm_bypass_byp_1
sensor_E: binary_sensor.vistaalarm_trouble_trbl_1
sensor_F: binary_sensor.vistaalarm_chime_chm_1
button_A: STAY
button_B: AWAY
button_C: DISARM
button_D: BYPASS
button_F: <
button_G: '>'
button_E: A
button_H: B
cmd_A:
keys: '3'
partition: 1
cmd_B:
keys: '2'
partition: 1
cmd_C:
keys: '1'
partition: 1
cmd_D:
keys: 6#
partition: 1
cmd_E:
keys: A
partition: 1
cmd_H:
keys: B
partition: 1
cmd_F:
keys: <
partition: 1
cmd_G:
keys: '>'
partition: 1
key_0:
keys: '0'
partition: 1
key_1:
keys: '1'
partition: 1
key_2:
keys: '2'
partition: 1
key_3:
keys: '3'
partition: 1
key_4:
keys: '4'
partition: 1
key_5:
keys: '5'
partition: 1
key_6:
keys: '6'
partition: 1
key_7:
keys: '7'
partition: 1
key_8:
keys: '8'
partition: 1
key_9:
keys: '9'
partition: 1
key_star:
keys: '*'
partition: 1
key_pound:
keys: '#'
partition: 1
text_1: 'OFF'
text_2: AWAY
text_3: STAY
text_4: MAX
text_5: TEST
text_6: BYPASS
text_7: INSTANT
text_8: CODE
text_9: CHIME
text_star: READY
text_pound: ''
text_0: ''
beep: sensor.vistaalarm_beeps_bp_1_beeps
view_pad: true
view_display: true
view_status: true
view_status_2: true
view_bottom: false
button_left: false
…On Thu, Nov 16, 2023, 12:51 PM Alain Turbide ***@***.***> wrote:
Can you post your keypads config from the yaml?
—
Reply to this email directly, view it on GitHub
<#114 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ANYP7AFSJZVJIRO7IOSPLRTYEZHA5AVCNFSM6AAAAAA7IKAL5CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKOJRGA3DQ>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
No I mean the yaml config. That's what controls the keypad
…On Thu, Nov 16, 2023, 1:28 PM crumbliness ***@***.***> wrote:
Here it is ...
type: custom:alarm-keypad-card
title: House Alarm
unique_id: vista1
disp_line1: sensor.vistaalarm_line1_ln1_1
disp_line2: sensor.vistaalarm_line2_ln2_1
scale: 1
service_type: esphome
service: vistaalarm_alarm_keypress_partition
status_A: AWAY
status_B: STAY
status_C: READY
status_D: BYPASS
status_E: TROUBLE
status_F: CHIME
status_G: ''
status_H: ''
sensor_A: binary_sensor.vistaalarm_away_arma_1
sensor_B: binary_sensor.vistaalarm_stay_arms_1
sensor_C: binary_sensor.vistaalarm_ready_rdy_1
sensor_D: binary_sensor.vistaalarm_bypass_byp_1
sensor_E: binary_sensor.vistaalarm_trouble_trbl_1
sensor_F: binary_sensor.vistaalarm_chime_chm_1
button_A: STAY
button_B: AWAY
button_C: DISARM
button_D: BYPASS
button_F: <
button_G: '>'
button_E: A
button_H: B
cmd_A:
keys: '3'
partition: 1
cmd_B:
keys: '2'
partition: 1
cmd_C:
keys: '1'
partition: 1
cmd_D:
keys: 6#
partition: 1
cmd_E:
keys: A
partition: 1
cmd_H:
keys: B
partition: 1
cmd_F:
keys: <
partition: 1
cmd_G:
keys: '>'
partition: 1
key_0:
keys: '0'
partition: 1
key_1:
keys: '1'
partition: 1
key_2:
keys: '2'
partition: 1
key_3:
keys: '3'
partition: 1
key_4:
keys: '4'
partition: 1
key_5:
keys: '5'
partition: 1
key_6:
keys: '6'
partition: 1
key_7:
keys: '7'
partition: 1
key_8:
keys: '8'
partition: 1
key_9:
keys: '9'
partition: 1
key_star:
keys: '*'
partition: 1
key_pound:
keys: '#'
partition: 1
text_1: 'OFF'
text_2: AWAY
text_3: STAY
text_4: MAX
text_5: TEST
text_6: BYPASS
text_7: INSTANT
text_8: CODE
text_9: CHIME
text_star: READY
text_pound: ''
text_0: ''
beep: sensor.vistaalarm_beeps_bp_1_beeps
view_pad: true
view_display: true
view_status: true
view_status_2: true
view_bottom: false
button_left: false
On Thu, Nov 16, 2023, 12:51 PM Alain Turbide ***@***.***>
wrote:
> Can you post your keypads config from the yaml?
>
> —
> Reply to this email directly, view it on GitHub
> <
#114 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/ANYP7AFSJZVJIRO7IOSPLRTYEZHA5AVCNFSM6AAAAAA7IKAL5CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKOJRGA3DQ>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#114 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABW4E7OAKYKUH5ISTBOETWDYEZLNRAVCNFSM6AAAAAA7IKAL5CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKOJRGQYDO>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Oh sorry. No access to that for a couple of weeks.
On Thu, Nov 16, 2023, 1:41 PM Alain Turbide ***@***.***>
wrote:
… No I mean the yaml config. That's what controls the keypad
On Thu, Nov 16, 2023, 1:28 PM crumbliness ***@***.***> wrote:
> Here it is ...
>
> type: custom:alarm-keypad-card
> title: House Alarm
> unique_id: vista1
> disp_line1: sensor.vistaalarm_line1_ln1_1
> disp_line2: sensor.vistaalarm_line2_ln2_1
> scale: 1
> service_type: esphome
> service: vistaalarm_alarm_keypress_partition
> status_A: AWAY
> status_B: STAY
> status_C: READY
> status_D: BYPASS
> status_E: TROUBLE
> status_F: CHIME
> status_G: ''
> status_H: ''
> sensor_A: binary_sensor.vistaalarm_away_arma_1
> sensor_B: binary_sensor.vistaalarm_stay_arms_1
> sensor_C: binary_sensor.vistaalarm_ready_rdy_1
> sensor_D: binary_sensor.vistaalarm_bypass_byp_1
> sensor_E: binary_sensor.vistaalarm_trouble_trbl_1
> sensor_F: binary_sensor.vistaalarm_chime_chm_1
> button_A: STAY
> button_B: AWAY
> button_C: DISARM
> button_D: BYPASS
> button_F: <
> button_G: '>'
> button_E: A
> button_H: B
> cmd_A:
> keys: '3'
> partition: 1
> cmd_B:
> keys: '2'
> partition: 1
> cmd_C:
> keys: '1'
> partition: 1
> cmd_D:
> keys: 6#
> partition: 1
> cmd_E:
> keys: A
> partition: 1
> cmd_H:
> keys: B
> partition: 1
> cmd_F:
> keys: <
> partition: 1
> cmd_G:
> keys: '>'
> partition: 1
> key_0:
> keys: '0'
> partition: 1
> key_1:
> keys: '1'
> partition: 1
> key_2:
> keys: '2'
> partition: 1
> key_3:
> keys: '3'
> partition: 1
> key_4:
> keys: '4'
> partition: 1
> key_5:
> keys: '5'
> partition: 1
> key_6:
> keys: '6'
> partition: 1
> key_7:
> keys: '7'
> partition: 1
> key_8:
> keys: '8'
> partition: 1
> key_9:
> keys: '9'
> partition: 1
> key_star:
> keys: '*'
> partition: 1
> key_pound:
> keys: '#'
> partition: 1
> text_1: 'OFF'
> text_2: AWAY
> text_3: STAY
> text_4: MAX
> text_5: TEST
> text_6: BYPASS
> text_7: INSTANT
> text_8: CODE
> text_9: CHIME
> text_star: READY
> text_pound: ''
> text_0: ''
> beep: sensor.vistaalarm_beeps_bp_1_beeps
> view_pad: true
> view_display: true
> view_status: true
> view_status_2: true
> view_bottom: false
> button_left: false
>
>
> On Thu, Nov 16, 2023, 12:51 PM Alain Turbide ***@***.***>
> wrote:
>
> > Can you post your keypads config from the yaml?
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#114 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/ANYP7AFSJZVJIRO7IOSPLRTYEZHA5AVCNFSM6AAAAAA7IKAL5CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKOJRGA3DQ>
>
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***
> > com>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#114 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/ABW4E7OAKYKUH5ISTBOETWDYEZLNRAVCNFSM6AAAAAA7IKAL5CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKOJRGQYDO>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#114 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ANYP7ACFC5RCF63EGNW4DT3YEZM4DAVCNFSM6AAAAAA7IKAL5CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKOJRGQ4TE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Here is the ESPHome yaml file I am using with the ESP32 circuit .... #for documentation see project at https://github.com/Dilbert66/esphome-VistaECP installed new master 11/15/23 - JHmoved to ESP32 & hardwired control board mounted inside vista 15P cabinet - JH#renamed zones to match insallation - JH vista_alarm_panel: Enroll your RF serial devices here. Format: serial#:loop#:zone# Each record is comma separated.For most devices loop1 is used such as 5800pir, other devices such as 5816 will use loop2. Please refer to yourRF device programming (*56 program) to see what loop and zones are assigned to your RF devices.You can refer to the pdf link below for more details on loop numbershttps://advancedsecurityllc.com/wp-content/uploads/5800%20Wireless%20Device%20List.pdfrfseriallookup: "0019994:2:66,0818433:4:22,0123456:1:55,0399512:1:17" # serial1:loop#:zone1,serial2:loop#:zone2rfseriallookup: "0909093:2:9" # Front Door defaultpartition: "1" #set to your main partition #assign a new virtual keypad address to each active partition using programs *190 - *196 *190 done - JH#and enter it below. For unused partitions, use 0 as the keypad address. ##esp32 ##esp8266 #note for the vista128 and vista250, the expanderaddr and relayaddr addresses must be 0 module addresses:07 4229 zone expander zones 9-1608 4229 zone expander zones 17-2409 4229 zone expander zones 25-3210 4229 zone expander zones 33-4011 4229 zone expander zones 41 4812 4204 relay module13 4204 relay module14 4204 relay module15 4204 relay moduleexpanderaddr1: "0" # 1st zone expander emulator (4229) address to use . Set to 0 to disable. relayaddr1: "0" # relay module emulation (4204) addresses. Set to 0 to disable ttl: "30000" # time to live in ms for zone/fire status before expiring; clean_build: "false" #default is false. only set to true if getting duplication errors in linking step. Once you compile, reset it back to false. esp32: #esp8266: #location of alarm panel code. You can use the github release version or see here for more info: https://esphome.io/components/external_componentsexternal_components:
esphome: platformio_options: wifi: ap: logger: api: ota: status_led: time:
########################################################################################################### Edit binary and text sensors below to suit your alarm setup.You can safely add or remove any sensor as needed.The id code is entered using the "id_code:" tag. Alternatively you canadd the id code in round brackets at the end of the sensor name: eg. (z1)binary_sensor: zone sensorsopen/close status for each zonezone id code = z+zone number
not used - delete? JH
you can also add fields to show fault statuses of other devices you have. The id will be 1 + device address.#relay addresses are 12/13/14/15
#zone expander device addresses are 07/08/09/10/11
#comm device address such as Alarmnet/LRR is 03
non zone sensorspartition ready statusready id code = rdy_ + partition number
#Partition 2 example
partition/panel trouble statustrouble id code = trbl_ + partition number
#Partition 2 example
bypass zones active statusbypass id code = byp_ + partition number
#Partition 2 example
armed away statusarmed away id code = arma_ + partition number
#Partition 2 example
armed statusarmed id code = arm_ + partition number
#Partition 2 example
armed stay statusarmed stay id code = arms_ + partition number
#Partition 2 example
armed instant statusarmed instant id code = armi_ + partition number
#Partition 2 example
armed night statusarmed night id code = armn_ + partition number
#Partition 2 example
ac statusac id code = (ac)
chime statuschime id code = chm_ + partition number
#Partition 2 example
alarm statusalarm id code = alm_ + partition number
#Partition 2 example
battery statusbattery id code = bat
fire alarm statusfire alarm id code = fire_ + partition number
#Partition 2 example
relay statusrelay id code = r + address + channel
text sensorstext_sensor: alternative zone status as a text sensor. Values: O=open, B=bypass,T=trbl or check,A=alarmzone id code = z+zone number
system status messagessystem status id code = ss_ + partition number
#Partition 2 example
long range radio messageslrr id code = lrr
RF zone messagesRF id code = rf
virtual lcd keypad line1 and line2 messages for each partitionpartition line1 id code = ln1_ + partition numberpartition line2 id code = ln2_ + partition numberpartition 1
partition 2
partition 3
zone status messages bypas/open/alarmzone status id code = zs
system beepsbeeps id code = bp_ + partition number
#- platform: gpio #example use of pin d8 as a zone trigger port for the emulated zone expander pin: D8id: pind8device_class: windowon_press: #zone,on/off- lambda: |-vista.setExpFault(17,1);on_release:- lambda: |-vista.setExpFault(17,0);end of panel sensor setup - no need to edit anything below.##############################################################################
debug: sensor:
|
Beta Was this translation helpful? Give feedback.
-
Can the current version of esphome-vistaECP work with a Vista 15P alarm system?
In Feb 21 I flashed vistaESP to an ESP ESP8266 and used the HA API to monitor and control my Vista 15P panel. All worked well.
Recently, I replaced the ESP8266 with a ESP32 and flashed it with the current master (11/12/23) expecting that it would work even though it is not listed as a supported model. ESPhome receives messages from the alarm panel but the panel does not respond to send messages. A log file follows.
I notice what I think is a response [CMD:753] after each keyed input starting with "F7" but I have no idea on how to decode it. I also find this message every 10 seconds [16:54:00][W][component:214]: Component vista_alarm_panel took a long time for an operation (0.15 s).
[16:54:00][W][component:215]: Components should block for at most 20-30ms.
Thanks,
Beta Was this translation helpful? Give feedback.
All reactions