.bash_aliases-rpi4

# Bash aliases file for Raspberry Pi 4 Ubuntu based LEMP web/email server. Based off of tutorials on linuxbabe.com.
# Don't forget to visit https://danran.rocks for my tutorials.
# If you are reading this, then you have obviously installed it using my instructions in the README.me file.
# However, if you want to uninstall this, you can read the readme file again, or run the following command below:
# rm $HOME/.bash_aliases && sudo rm -r $HOME/RP4-Ubuntu-Server-bash_aliases && cp $HOME/.bash_aliases.orig $HOME/.bash_aliases && source $HOME/.bash_aliases

##################################
########## Permissions ###########
##################################

# Reset wordpress permission and ownership to default (Note: Be sure that you are already in your wordpress directory before running this command. Otherwise it is dangerous)
alias wppermreset='sudo chown www-data:www-data  -R * && sudo find . -type d -exec chmod 755 {} \; && sudo find . -type f -exec chmod 644 {} \; && echo "Your wordpress ownership and permissions were reset"'

##################################
########## System/Dpkg ###########
##################################

# List the state of the systemd unit files (static, enabled, disabled, masked, indirect). Note: this has nothing to do with the state of the service.
# https://askubuntu.com/questions/710420/why-are-some-systemd-services-in-the-masked-state
alias dpkglistunits='sudo systemctl list-unit-files'
alias dpkglistunits2='sudo systemctl list-units --all'

# List the state of systemd services including "loaded but inactive units".
# https://askubuntu.com/questions/710420/why-are-some-systemd-services-in-the-masked-state
alias dpkglistservices='sudo systemctl list-units --all'

# List the state of systemd services exluding "loaded but inactive units".
# https://askubuntu.com/questions/710420/why-are-some-systemd-services-in-the-masked-state
alias dpkglistservices2='sudo systemctl list-units'

##################################
####### Files and Folders ########
##################################

# Show file/folder permissions in number mode and letter mode
alias perms='ls -la && echo "Just above are the contents of the working directory" && read -p "Which file or folder would you like to show permissions for? " file_or_folder && stat $file_or_folder | grep "Access: ("'

# Search the current directory recursively for a file by filename!
alias ffind='read -p "Find a File! Enter the file name you are searching for. You may use wildcards \"*\" : " filename && sudo find . -type f -name "$filename"'

##################################
#### ParrotOS-bash_aliases #######
##################################
#alias nano='nano -c'
#alias ali='nano ~/.bash_aliases'
#alias sali='source ~/.bash_aliases'
# this is to scale your desktop. Ex: 'scale 1.1x1.1'
alias scale='xrandr --output eDP-1 --scale'
# Put Wireless drivers into monitor mode
alias mm='echo 1 | sudo tee /proc/brcm_monitor0 && sudo airodump-ng prism0'
alias moni='sudo airodump-ng prism0'
alias moni2='sudo airmon-ng start wlp3s0'
alias apup='sudo apt update && sudo apt full-upgrade && sudo apt clean'
alias listtools='sudo apt-get update && apt-cache search parrot-'
# Start torghost
alias tgstart='sudo $HOME/Git/torghost/torghost.py -s'
# Torghost manual
alias tgman='sudo $HOME/Git/torghost/torghost.py -h'
# Change torghost nodes
alias tgswitch='sudo $HOME/Git/torghost/torghost.py -r'
alias tgstop='sudo $HOME/Git/torghost/torghost.py -x'
alias tgupdate='sudo $HOME/Git/torghost/torghost.py -u'

##################################
# RP4-Ubuntu-Server-bash_aliases #
##################################

# Update this aliases file in "$HOME/RP4-Ubuntu-Server-bash_aliases" and source the Ubuntu Users updated aliases file so it reflects changes to the github main repo
alias alup='/usr/bin/git -C $HOME/RP4-Ubuntu-Server-bash_aliases pull origin main ; . $HOME/.bash_aliases'

############################
######## OPEN SSL ##########
############################

# Check for TLS Version 1 on mail.facl.xyz
alias otls1='openssl s_client -connect mail.facl.xyz:443 -tls1'

# Check for TLS Version 1.1 on mail.facl.xyz
alias otls1.1='openssl s_client -connect mail.facl.xyz:443 -tls1_1'

# Check for TLS Version 1.2 on mail.facl.xyz
alias otls1.2='openssl s_client -connect mail.facl.xyz:443 -tls1_2'

# Check for TLS Version 1.3 on mail.facl.xyz
alias otls1.3='openssl s_client -connect mail.facl.xyz:443 -tls1_3'

# Check for all versions of TLS on mail.facl.xyz
alias otlscheck='nmap --script ssl-enum-ciphers mail.facl.xyz'

############################
# USEFUL COMMANDS NO ALIAS #
############################

# COMMENT OUT SAME LINE IN MULTIPLE .CONF FILES AT ONCE USING THE FIND AND SED COMMAND.
# Find and replace a string in all files in current directory recursively, using a seperator (|) other than slash (/) for the sed command since slashes are being used for directory locations.
# In this example we comment out the line "ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot" in every .conf file (NOT RECURSIVELY) in the /etc/nginx/conf.d/ folder
# EX: sudo find . -name '*.conf' -exec sed -i.bak -e 's|ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot|#ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot|g' {} \;
# Search for and reveal what configurationfiles are using your old/static/unchangeable hostname on the raspberry pi 4
# grep -r old_hostname / 2>/dev/null

# Search folder recursively for all files with a specific string in a filename
# grep -r -l "filename-string-to-search" /path/to/search/*
# EX: sudo grep -r -l ".Spotlight-V100" /*

# Find out what processes are using what port (ex: port 80)
# EX-port80: netstat -tulpn | grep --color :80
# EX-port443: netstat -tulpn | grep --color :443

###########################
######## HOSTNAME #########
###########################

# Find all files that use the current hostname or original immutable hostname
alias hostnamefind='sudo grep -r $HOSTNAME / 2>/dev/null'

###########################
########### CRON ##########
###########################

# Get cron status
alias cronstat='systemctl status cron'

# View cron job history
alias cronhist='grep CRON /var/log/syslog && echo "Your cronjob history is printed above!" || echo "Your cronjob history could not be printed!"'

# check if cron is actually running anything at this moment in time 
alias croncheck='pstree -apl `pidof cron`'

# View list of root user cronjobs
alias cronlistroot='sudo crontab -l'

# View list of regular user cronjobs
alias cronlist='crontab -l'

###########################
###### .bash_aliases ######
###########################

# Update your bash aliases file with this repo already installed
alias baud='/usr/bin/git -C $HOME/RP4-Ubuntu-Server-bash_aliases pull origin main && source $HOME/.bash_aliases'

###########################
## Raspberry Pi Hardware ##
###########################

# Check the "blocked/unblocked" status of network (Wi-Fi) interfaces with rfkill
alias wifistat='rfkill'

# Enable Wi-Fi on Raspberry Pi 4 with rfkill's software unblock (soft block)
alias wifion='sudo rfkill unblock wifi && echo "Your wifi (wlan0) has been enabled with rfkill." || echo "Your wifi (wlan0) could not be enabled with rfkill."'

# Disable Wi-Fi on Raspberry Pi 4 with rfkill's software block (soft block)
alias wifioff='sudo rfkill block wifi && echo "Your wifi (wlan0) has been disbled with rfkill." || echo "Your wifi (wlan0) could not be disabled with rfkill."'

###########################
######### BACKUPS #########
###########################

# piclone reminder command
alias piclone='echo "please use the piclone20, or piclone22 command to specify which version of Ubuntu you are cloning"'

# UBUNTU 20: Backup your entire Raspberry Pi into a cloned .IMG file
alias piclone20='sudo /usr/local/bin/remove-old-backups.sh; sudo /usr/local/bin/image-backup -u --initial /mnt/RpiDbBackups/Images-Daily/$(date +\%Y\-\%m\-\%d\_\%H\.\%M\.\%S)_mail.facl.xyz.UBUNTU_20_MANUAL_BACKUP.img && echo "SUCCESS! Your Raspberry Pi running Ubuntu 20.04 has been cloned to a disk image." || echo "BUMMER! Your Raspberry Pi running Ubuntu 20 Could Not be cloned. Please check hard drive space and try again."'

# UBUNTU 22: 
alias piclone22='sudo /usr/local/bin/remove-old-backups.sh; sudo /usr/local/bin/image-backup -u --initial /mnt/RpiDbBackups/Images-Daily/$(date +\%Y\-\%m\-\%d\_\%H\.\%M\.\%S)_mail.facl.xyz.UBUNTU_22_MANUAL_BACKUP.img && echo "SUCCESS! Your Raspberry Pi running Ubuntu 22.04 has been cloned to a disk image." || echo "BUMMER! Your Raspberry Pi running Ubuntu 22 Could Not be cloned. Please check hard drive space and try again."'

# Backup your wordpress directories and MySql databases to disk
alias pibackup='sudo /usr/local/bin/remove-old-backups.sh; sudo /usr/local/bin/wp+sql_backup.sh && echo "SUCCESS! Your Wordpress directories and MySql Databases have been backed up." || echo "BUMMER! Your Wordpress Directories and MySql Databases could not be backed up."'

 ###########################
######### NEXTCLOUD #######
###########################

# Run the occ command as www-data php
alias occ='sudo -u www-data php occ'

###########################
######### UNBOUND #########
###########################

# Get Status of Unbound DNS resolver
alias ubstat='sudo systemctl status unbound.service && echo "Here is the status of Unbound." || echo "Unbound DNS could not check status. Check your syntax and try again."'

# Enable unbound DNS resolver
alias ubenable='sudo systemctl enable unbound.service && echo "Unbound DNS has been enabled." || echo "Unbound DNS could not be enabled. Check your syntax and try again."'

# Disable unbound DNS resolver
alias ubdisable='sudo systemctl enable unbound.service && echo "Unbound DNS has been disabled." || echo "Unbound DNS could not be disabled. Check your syntax and try again."'

# Start unbound DNS resolver
alias ubstart='sudo systemctl start unbound.service && echo "Unbound DNS has been started." || echo "Unbound DNS could not start. Check your syntax and try again."'

# Stop unbound DNS resolver
alias ubstop='sudo systemctl stop unbound.service && echo "Unbound DNS has been stopped." || echo "Unbound DNS could not stop. Check your syntax and try again."'

# Restart unbound DNS resolver
alias ubrl='sudo systemctl restart unbound.service && echo "Unbound DNS has been restarted." || echo "Unbound DNS could not be restarted. Is it running?"'

###########################
##### SYSTEMD-RESOLVED ####
###########################

# Get Status of systemd-resolved
alias sdrstat='sudo systemctl status systemd-resolved && echo "Here is the status of systemd-resolved." || echo "systemd-resolved could not check status. Check your syntax and try again."'

# Enable systemd-resolved
alias sdrenable='sudo systemctl enable systemd-resolved --now && echo "systemd-resolved has been enabled." || echo "systemd-resolved could not be enabled. Check your syntax and try again."'

# Disable systemd-resolved
alias sdrdisable='sudo systemctl disable systemd-resolved --now && echo "systemd-resolved has been disabled." || echo "systemd-resolved could not be disabled. Check your syntax and try again."'

# Start systemd-resolved
alias sdrstart='sudo systemctl start systemd-resolved --now && echo "systemd-resolved has been started." || echo "systemd-resolved could not start. Check your syntax and try again."'

# Stop systemd-resolved
alias sdrstop='sudo systemctl stop systemd-resolved --now && echo "systemd-resolved has been stopped." || echo "systemd-resolved could not stop. Check your syntax and try again."'

# Restart systemd-resolved
alias sdrrl='sudo systemctl restart systemd-resolved --now && echo "systemd-resolved has been restarted." || echo "systemd-resolved could not be restarted. Is it running?"'

###########################
###### LOG CHECKING #######
###########################

# AUTH
alias catauthlog='sudo cat /var/log/auth.log'
alias catkernlog='sudo cat /var/log/kern.log'

# MAIL LOG 

# Mail log with tail and no -f (Default)
# Check the journal/logs of the main mail program located at /var/log/mail.log
alias maillog='sudo tail /var/log/mail.log'
alias mailerrlog='sudo tail /var/log/mail.err'

# Mail log with cat
alias catmaillog='sudo cat /var/log/mail.log'
alias catmailerrlog='sudo cat /var/log/mail.err'

# Mail Log with tail -f
alias tailmaillog='sudo tail -f /var/log/mail.log'
alias tailmailerrlog='sudo tail -f /var/log/mail.err'

# MODSECURITY
alias catmodseclog='sudo cat /var/log/modsec_audit.log'
alias catmodseclog2='sudo cat /var/log/modsec_audit.log.1'

# PHP-FMP
alias catfpmlog='sudo cat /var/log/php7.4-fpm.log'
alias catfpmslowlog='sudo cat /var/log/php-fpm/slow.log'

# SYSLOG
alias catsyslog='sudo cat /var/log/syslog'

# WIREGUARD VPN
alias catvpnlog='sudo cat /var/log/vpn_checking.log'

# FAIL2BAN
alias f2bcatlog='sudo cat /var/log/fail2ban.log'

# AMPLIFY
alias catamplifylog='sudo cat /var/log/amplify-agent/agent.log'

# CLAMAV
alias catclamavlog='sudo cat /var/log/clamav/clamav.log'

# DOVECOT
alias catdovecotlog='sudo cat /var/log/dovecot/dovecot.debug'
alias catdovecoterrlog='sudo cat /var/log/dovecot/dovecot.err'

# LETSENCRYPT
alias catletsencryptlog='sudo cat /var/log/letsencrypt/letsencrypt.log'

# MYSQL
alias catmysqllog='sudo cat /var/log/mysql/error.log'
alias catmysqlslowlog='sudo cat /var/log/mysql/mariadb-slow.log'

# NETDATA
alias catnetdataaccesslog='sudo cat /var/log/netdata/access.log'
alias catnetdataerrlog='sudo cat /var/log/netdata/error.log'
alias catnetdatacollectorlog='sudo cat /var/log/netdata/collector.log'
alias catnetdatahealthlog='sudo cat /var/log/netdata/health.log'

# NGINX
alias catnginxaccesslog='sudo cat /var/log/nginx/access.log'
alias catnginxerrlog='sudo cat /var/log/nginx/error.log'
alias catnginxdanranlog='sudo cat /var/log/nginx/danran.rocks.error.log'
alias catnginxcakelog='sudo cat /var/log/nginx/oddcake.net.error.log'
alias catnginxmolog='sudo cat /var/log/nginx/mcmo.is.error.log'
alias catnginxmolog='sudo cat /var/log/nginx/mcmo.is.error.log'
alias catnginxpmalog='sudo cat /var/log/nginx/phpmyadmin.error.log'
alias catnginxwebminlog='sudo cat /var/log/nginx/webmin.error.log'

# REDIS
alias catredislog='sudo cat /var/log/redis/redis-server.log'

# WORDPRESS
alias catwpmo='sudo cat /var/log/wordpress/mcmo.is.error.log'
alias catwpcake='sudo cat /var/log/wordpress/oddcake.net.error.log'
alias catwpdanran='sudo cat /var/log/wordpress/danran.rocks.error.log'

###########################
# REAL-TIME LOG CHECKING ##
###########################

# AUTH
alias tailauthlog='sudo tail -f /var/log/auth.log'
alias tailkernlog='sudo tail -f /var/log/kern.log'

# MODSECURITY
alias tailmodseclog='sudo tail -f /var/log/modsec_audit.log'
alias tailmodseclog2='sudo tail -f /var/log/modsec_audit.log.1'

# PHP-FMP
alias tailfpmlog='sudo tail -f /var/log/php7.4-fpm.log'
alias tailfpmslowlog='sudo tail -f /var/log/php-fpm/slow.log'

# SYSLOG
alias tailsyslog='sudo tail -f /var/log/syslog'

# WIREGUARD VPN
alias tailvpnlog='sudo tail -f /var/log/vpn_checking.log'

# FAIL2BAN
alias f2btaillog='sudo tail -f /var/log/fail2ban.log'

# AMPLIFY
alias tailamplifylog='sudo tail -f /var/log/amplify-agent/agent.log'

# CLAMAV
alias tailclamavlog='sudo tail -f /var/log/clamav/clamav.log'

# DOVECOT
alias taildovecotlog='sudo tail -f /var/log/dovecot/dovecot.debug'
alias taildovecoterrlog='sudo tail -f /var/log/dovecot/dovecot.err'

# LETSENCRYPT
alias tailletsencryptlog='sudo tail -f /var/log/letsencrypt/letsencrypt.log'

# MYSQL
alias tailmysqllog='sudo tail -f /var/log/mysql/error.log'
alias tailmysqlslowlog='sudo tail -f /var/log/mysql/mariadb-slow.log'

# NETDATA
alias tailnetdataaccesslog='sudo tail -f /var/log/netdata/access.log'
alias tailnetdataerrlog='sudo tail -f /var/log/netdata/error.log'
alias tailnetdatacollectorlog='sudo tail -f /var/log/netdata/collector.log'
alias tailnetdatahealthlog='sudo tail -f /var/log/netdata/health.log'

# NGINX
alias tailnginxaccesslog='sudo tail -f /var/log/nginx/access.log'
alias tailnginxerrlog='sudo tail -f /var/log/nginx/error.log'
alias tailnginxdanranlog='sudo tail -f /var/log/nginx/danran.rocks.error.log'
alias tailnginxcakelog='sudo tail -f /var/log/nginx/oddcake.net.error.log'
alias tailnginxmolog='sudo tail -f /var/log/nginx/mcmo.is.error.log'
alias tailnginxmolog='sudo tail -f /var/log/nginx/mcmo.is.error.log'
alias tailnginxpmalog='sudo tail -f /var/log/nginx/phpmyadmin.error.log'
alias tailnginxwebminlog='sudo tail -f /var/log/nginx/webmin.error.log'

# REDIS
alias tailredislog='sudo tail -f /var/log/redis/redis-server.log'

# WORDPRESS
alias tailwpmo='sudo tail -f /var/log/wordpress/mcmo.is.error.log'
alias tailwpcake='sudo tail -f /var/log/wordpress/oddcake.net.error.log'
alias tailwpdanran='sudo tail -f /var/log/wordpress/danran.rocks.error.log'

###########################
####### LOG ROTATE ########
###########################

# Test the logrotate config file by doing a dry run. lrtest stands for log-rotate-test.
alias lrtest='sudo logrotate /etc/logrotate.conf --debug'

###########################
######### SYSTEMCTL #######
###########################

# List all currently running services
alias serviceslist='systemctl --type=service'

###########################
########### ROOT ##########
###########################

# Get lock status of root account
alias rootstat='sudo passwd -S root'

# Password LOCK ROOT account using usermod
alias rootlock='sudo usermod -L root && sudo passwd -S root'

# Password LOCK ROOT account using passwd
alias rootlock2='sudo passwd -l root && sudo passwd -S root'

# Password UNLOCK ROOT account using usermod
alias rootunlock='sudo usermod -U root && sudo passwd -S root'

# Password UNLOCK ROOT account using passwd
alias rootunlock2='sudo passwd -u root && sudo passwd -S root'

# DISABLE ROOT account using usermod
alias rootblock="sudo usermod -p '!' root && sudo passwd -S root"

# DISABLE ROOT account using passwd
alias rootdblock2='sudo passwd -dl root && sudo passwd -S root'

# ENABLE ROOT account using passwd
alias rootunblock='sudo passwd root && sudo passwd -S root'

###########################
######### UBUNTU ##########
###########################

# Get lock status of Ubuntu account
alias ubuntustat='sudo passwd -S ubuntu'

# Password LOCK UBUNTU account using usermod
alias ubuntulock='sudo usermod -L ubuntu && sudo passwd -S ubuntu'

# Password LOCK UBUNTU account using passwd
alias ubuntulock2='sudo passwd -l ubuntu && sudo passwd -S ubuntu'

# Password UNLOCK ROOT account using usermod
alias ubuntuunlock='sudo usermod -U ubuntu && sudo passwd -S ubuntu'

# Password UNLOCK ROOT account using passwd
alias ubuntuunlock2='sudo passwd -u ubuntu && sudo passwd -S ubuntu'

# DISABLE ROOT account using usermod
alias ubuntudisable="sudo usermod -p '!' ubuntu && sudo passwd -S ubuntu"

# DISABLE ROOT account using passwd
alias ubuntudisable2='sudo passwd -dl ubuntu && sudo passwd -S ubuntu'

# ENABLE ROOT account using passwd
alias ubuntuenable='sudo passwd ubuntu && sudo passwd -S ubuntu'

###########################
########### MAIL ##########
###########################

# Open "Mail Whitelists" files to add to whitelists (ignore postscreen whitelists and blacklists). Then rebuild the postmap override whitelist database.
#alias mwl='sudo nano /etc/postfix/rbl_override /etc/postfix/helo_access /etc/spamassassin/local.cf /etc/postgrey/whitelist_clients ; sudo postmap /etc/postfix/rbl_override ; sudo postmap /etc/postfix/helo_access'
alias mwl='sudo nano /etc/opendmarc/ignore.hosts /etc/postfix/rbl_override /etc/postfix/helo_access /etc/spamassassin/local.cf /etc/postgrey/whitelist_clients ; sudo postmap /etc/postfix/rbl_override ; sudo postmap /etc/postfix/helo_access ; sudo spamassassin --lint && sudo systemctl restart spamassassin ; sudo systemctl restart amavis ; sudo systemctl restart postgrey ; sudo systemctl restart opendmarc'

# Open "Mail IP Whitelists" files to add IP addresses to mail whitelists
alias mwlip='sudo nano /etc/postfix/postscreen_access.cidr'

# Mail test TLSv1
alias mttls1='openssl s_client -starttls smtp -crlf -connect localhost:587 -tls1'

# Mail test TLSv1.1
alias mttls1.1='openssl s_client -starttls smtp -crlf -connect localhost:587 -tls1_1'

# Mail test TLSv1.2
alias mttls1.2='openssl s_client -starttls smtp -crlf -connect localhost:587 -tls1_2'

# Mail test TLSv1.3
alias mttls1.3='openssl s_client -starttls smtp -crlf -connect localhost:587 -tls1_3'

###########################
######## SPF RECORDS ######
###########################

# Check if SPF record for mcmo.is is propagated to the internet
alias spftestmo='dig mcmo.is txt'

# Check if SPF record for oddcake.net is propagated to the internet
alias spftestcake='dig oddcake.net txt'

# Check if SPF record for danran.rocks is propagated to the internet
alias spftestdanran='dig danran.rocks txt'

# Check if SPF record for facl.xyz is propagated to the internet
alias spftestfacl='dig facl.xyz txt'

##################################
# SPAM ASSASSIN / SPAMASS-MILTER #
##################################

# Check status of spamassassin
alias sastat='sudo systemctl status spamassassin spamass-milter'

# Enable Spamassassin
alias saenable='sudo systemctl enable spamassassin spamass-milter'

# Disable spamassassin
alias sadisable='sudo systemctl disable spamassasin spamass-milter'

# Start spamassassin
alias sastart='sudo systemctl start spamassassin spamass-milter'

# Stop spamassassin
alias sastop='sudo systemctl stop spamassassin spamass-milter'

# Reload spamassassin
alias sarl='sudo systemctl restart spamassassin spamass-milter'

# Check syntax of spamassassin local.cf file.
alias satestroot='sudo spamassassin --lint'
alias satestroot2='sudo spamassassin --lint -D'
alias satest='spamassassin --lint'
alias satest2='spamassassin --lint -D'

# Change spamassassin reject score
# Note, you need to find the following line 'OPTIONS="${OPTIONS} -r 8"' and change the 8 to the desired reject score.
alias sascore='sudo nano /etc/default/spamass-milter'

# Adjust spamassassin whitelist and blacklist
alias sawl='sudo nano /etc/spamassassin/local.cf'

# After adding custom rules, close the file and run the following command to check syntax. Silent output means theres no syntax error.
alias sacheck='sudo spamassassin --lint'

###########################
########### PHP ###########
###########################

###########################
######### NEXTCLOUD #######
###########################

# Shorten nexcloud's cli "occ" command to just "occ"
alias occ='sudo -u www-data php occ'

###########################
######### OPENDKIM ########
###########################

# Quick acess to opendkim journal logs
alias dklog='sudo journalctl -eu opendkim'

# Restart OpenDKIM
alias dkrl='sudo systemctl restart opendkim  && echo "OpenDKIM restarted! Success!" || echo "Syntax error, OpenDKIM did not restart"'

# Check status of OpenDKIM
alias dkstat='sudo systemctl status opendkim  && echo "Just above is the status of OpenDKIM!" || echo "Syntax error, cannot get status of OpenDKIM"'

# Test DKIM key for www.mcmo.is
alias dktestmo='sudo opendkim-testkey -d mcmo.is -s default -vvv && echo "Here are the results of your DKIM Key test for mcmo.is" || echo "We could not test your DKIM key for mcmo.is"'

# Test DKIM key for oddcake.net
alias dktestcake='sudo opendkim-testkey -d oddcake.net -s default -vvv && echo "Here are the results of your DKIM Key test for oddcake.net" || echo "We could not test your DKIM key for oddcake.net"'

# Test DKIM key for danran.rocks
alias dktestdanran='sudo opendkim-testkey -d danran.rocks -s default -vvv && echo "Here are the results of your DKIM Key test for danran.rocks" || echo "We could not test your DKIM key for danran.rocks"'

# Test DKIM Key for facl.xyz
alias dktestfacl='sudo opendkim-testkey -d facl.xyz -s default -vvv && echo "Here are the results of your DMIM Key test for facl.xyz" || echo "We could not test your DKIM key for facl.xyz"'

###########################
######### NETDATA #########
###########################

# Netdata get status
alias ndstat='sudo service netdata status'

# Netdata restart
alias ndrl='sudo service netdata restart'

###########################
######### DOVECOT #########
###########################

# Dovecot Version
alias dcv='dovecot --version && echo "This is your version of Dovecot ^^^^" || echo "We could not get your Dovecot version number"'

# List available password schemes (dcpsl=dovecot,password,schemes,list)
alias dcpsl='sudo doveadm pw -l && echo "These are the available password shemes in dovecot." || echo "We could not get available password shemes in dovecot. Check your syntax and try again."'

# verify the current setting for dovecot dh (diffie hellman) parameters (i.e. show location of dovecot diffie-hellman file)
alias dcdh='doveconf -S | grep "^ssl_dh"'

# Check size of Dovecot diffie hellman file
alias dcdhs='openssl dhparam -in /usr/share/dovecot/dh.pem -text -noout'

# Check the dovecot config files for errors
alias dovechk='sudo doveconf >/dev/null && echo OK'

###########################
###### OCSP STAPLING ######
###########################

# Test OCSP Stapling on mcmo.is
alias ocsptestmo="echo QUIT | openssl s_client -connect www.mcmo.is:443 -status 2> /dev/null | grep -A 17 'OCSP response:' | grep -B 17 'Next Update'"

# Test OCSP Stapling on danran.rocks
alias ocsptestdanran="echo QUIT | openssl s_client -connect danran.rocks:443 -status 2> /dev/null | grep -A 17 'OCSP response:' | grep -B 17 'Next Update'"

# Test OCSP Stapling on oddcake.net
alias ocsptestcake="echo QUIT | openssl s_client -connect oddcake.net:443 -status 2> /dev/null | grep -A 17 'OCSP response:' | grep -B 17 'Next Update'"

###########################
########### DNS ###########
###########################

# Quickly determine DNS RESOLVER you are using.
alias dns='systemd-resolve --status | grep "DNS Servers" -A2'
alias dns2="systemd-resolve --status | grep 'DNS Servers' -A2"
alias dns3='sudo resolvectl dns $iface'

# View your current DNS Cache Size & Other info
alias dnscache='sudo systemd-resolve --statistics'

# Flush DNS Cache
alias dnsflush='sudo resolvectl flush-caches && echo "DNS Cache has been flushed" || echo "Oops! We Could NOT flush the DNS Cache"'

# Flush DNS Cache Using DNS-CLEAN
alias dnsclean='sudo /etc/init.d/dns-clean start && echo "DNS Cache has been cleaned" || echo "Oops! DNS Cache COULD NOT BE CLEANED!"'

###########################
########## DISKS ##########
###########################

# Check Free space
alias space='df -H /dev/sda2 && echo "Free space statistics are above" || echo "Cannot get free space statistics. Check your syntax."'

###########################
######## PHP-FPM ##########
###########################

### FPM-7.4

# Status php7.4-fpm
alias fpm7stat='sudo service php7.4-fpm status'

# Start php7.4-fpm
alias fpm7start='sudo systemctl start php7.4-fpm.service && echo "sudo systemctl start php7.4-fpm.service command worked, FPM started Correctly" || echo "Syntax Error, fpm7.4 did not start correctly"'

# Stop php7.4-fpm
alias fpm7stop='sudo systemctl stop php7.4-fpm.service && echo "sudo systemctl stop php7.4-fpm.service command worked, FPM stopped Correctly" || echo "Syntax Error, fpm7.4 did not stop correctly"'

# Restart php7.4-fpm
alias fpm7rl='sudo systemctl restart php7.4-fpm.service && echo "sudo systemctl restart php7.4-fpm.service command worked, FPM restarted Correctly" || echo "Syntax Error, fpm7.4 did not restart correctly"'

# Enable php7.4-fpm
alias fpm7enable='sudo systemctl enable php7.4-fpm.service && echo "sudo systemctl enable php7.4-fpm.service command worked, FPM enabled correctly" || echo "Syntax Error, fpm7.4 was not enabled correctly"'

# Disable php7.4-fpm
alias fpm7disable='sudo systemctl disable php7.4-fpm.service && echo "sudo systemctl disable php7.4-fpm.service command worked, FPM disabled correctly" || echo "Syntax Error, fpm7.4 was not disabled correctly"'

### FPM-8.1

# Status php8.1-fpm
alias fpm8stat='sudo service php8.1-fpm status'

# Start php8.1-fpm
alias fpm8start='sudo systemctl start php8.1-fpm.service && echo "sudo systemctl start php8.1-fpm.service command worked, FPM started Correctly" || echo "Syntax Error, php8.1-fpm did not start correctly"'

# Stop php8.1-fpm
alias fpm8stop='sudo systemctl stop php8.1-fpm.service && echo "sudo systemctl stop php8.1-fpm.service command worked, FPM stopped correctly" || echo "Syntax Error, php8.1-fpm did not stop correctly"'

# Restart php8.1-fpm
alias fpm8rl='sudo systemctl restart php8.1-fpm.service && echo "sudo systemctl restart php8.1-fpm.service command worked, FPM restarted Correctly" || echo "Syntax Error, php8.1-fpm did not restart correctly"'

# Enable php8.1-fpm
alias fpm8enable='sudo systemctl enable php8.1-fpm.service && echo "sudo systemctl enable php8.1-fpm.service command worked, FPM enabled correctly" || echo "Syntax Error, fpm8.1 was not enabled correctly"'

# Disable php8.1-fpm
alias fpm8disable='sudo systemctl disable php8.1-fpm.service && echo "sudo systemctl disable php8.1-fpm.service command worked, FPM disabled correctly" || echo "Syntax Error, fpm8.1 was not disabled correctly"'

###########################
##### SERVICE RESTART #####
###########################

# Restart sshd service
alias sshrl='sudo systemctl restart sshd.service && echo "sudo systemctl restart sshd.service command worked, SSHD reloaded Correctly" || echo "Syntax Error, sshd did not reload correctly"'

# Reload mysql
alias sqlrl='sudo service mysql reload  && echo "mysql reloaded Correctly" || echo "Syntax Error, mysql did not reload correctly"'

# Reload Nginx
alias nrl='sudo service nginx reload && echo "Nginx reloaded correctly" || echo "Syntax Error, Nginx not reloaded correctly"'

# Reload mariadb-server
alias mrl='sudo systemctl restart mariadb && echo "Mariadb-server restarted correctly! YAY!" || echo "Mariadb-server didnt restart correctly FUCK!!!"'

# Reload mariadb-client
#alias mcrl='sudo systemctl restart mariadb && echo "Mariadb-client restarted correctly! YAY!" || echo "Mariadb-client didnt restart correctly FUCK!!!"'

###########################
###### SERVICE STOP #######
###########################

# Stop sshd service
alias sshstop='sudo systemctl stop sshd.service && echo "sudo systemctl stop sshd.service command worked, SSHD stopped Correctly" || echo "Syntax Error, sshd did not stop correctly"'

# Stop Mysql
alias sqlstop='sudo service mysql stop  && echo "mysql stopped correctly" || echo "syntax Error, mysql did not stop correctly"'

# Stop Nginx
alias nstop='sudo service nginx stop && echo "nginx stopped correctly" || echo "syntax Error, Nginx not stop correctly"'

###########################
###### SERVICE START ######
###########################

# start sshd service
alias sshstart='sudo systemctl start sshd.service && echo "sudo systemctl start sshd.service command worked, SSHD startped Correctly" || echo "Syntax Error, sshd did not start correctly"'

# start Mysql
alias sqlstart='sudo service mysql start  && echo "mysql startped correctly" || echo "syntax Error, mysql did not start correctly"'

# start Nginx
alias nstart='sudo service nginx start && echo "nginx started correctly" || echo "syntax Error, Nginx did not start correctly"'

###########################
##### SERVICE STATUS ######
###########################

# Show dovecot status
alias dcstat='sudo service dovecot status'

# show nginx status
alias nstat='sudo service nginx status'

# show mariadb status
alias sqlstat='sudo service mysql status'

###########################
###### AVAHI DAEMON #######
###########################

# Enable avahi-daemon on boot
alias adenable='sudo systemctl enable avahi-daemon && echo "sudo systemctl enable avahi-daemon command worked. Avahi-daemon will be ENABLED at boot" || echo "Syntax error. We couldnt enable avahi-daemon at boot. Please check your syntax for errors and try again."'

# Disable avahi-daemon on boot
alias addisable='sudo systemctl disable avahi-daemon && echo "Congrats! sudo systemctl disable avahi-daemon command worked. Avahi-daemon is now DISABLED at  boot" || echo "Syntax error. We couldnt disable avahi-daemon at boot. Please check your syntax for errors and try again."'

# Start avahi-daemon
alias adstart='sudo service avahi-daemon start && echo "Congrats! Avahi-daemon STARTED successfully." || echo "Syntax error!!! We couldnt start the avahi-daemon. Please check your syntax for errors and try again."'

# Stop avahi-daemon
#alias adstop='sudo service avahi-daemon stop && echo "Congrats! Avahi-daemon STOPPED successfully." || echo "Syntax error!!! We couldnt start the avahi-daemon. Please check your syntax for errors and try again."'

# Restart avahi-daemon
alias adrl='sudo service avahi-daemon restart && echo "Congrats! Avahi-daemon RESTARTED successfully." || echo "Syntax error. We couldnt restart the avahi-daemon. Please check your syntax for errors and try again."'

# Check avahi-daemos status
alias adstat='sudo service avahi-daemon status && echo "Congrats! Avahi-daemon status checked successfully." || echo "Syntax error. We couldnt check the status of the avahi-daemon. Please check your syntax for errors and try again."'

# Edit avahi configuration file
alias adconf='sudo nano -c /etc/avahi/avahi-daemon.conf'

###########################
##### WIREGUARD CLIENT ####
###########################

# Check VultrWireguard client logs
alias wgclog='sudo journalctl -eu wg-quick@wg-client0 && echo "Your wireguard client logs are here ^^^^^^^^ " || echo "Syntax error. We could not get the logs of your wireguard client. Check your syntax and try again."'

# Check Wireguard client debug logs
#alias wgclog2-'eval "sudo journalctl -kf | grep wireguard"'
#alias wgclog3='eval "sudo dmesg -wH | grep wireguard"'

# Start VultrWireguard Tunnel
alias wgcstart='sudo systemctl start wg-quick@wg-client0.service && echo "sudo systemctl start wg-quick@wg-client0.service was successfully run. Wireguard Client Service is now running." || echo "Syntax error. We could not start the Wireguard client. Check your syntax and try again."'

# Stop VultrWireguard Tunnel
alias wgcstop='sudo systemctl stop wg-quick@wg-client0.service && echo "sudo systemctl stop wg-quick@wg-client0.service was successfully run. Wireguard Client Service has stopped running." || echo "Syntax error. We could not stop the Wireguard client. Check your syntax and try again."'

# Start VultrWireguard Tunnel
alias wgcrl='sudo systemctl restart wg-quick@wg-client0.service && echo "sudo systemctl restart wg-quick@wg-client0.service was successfully run. The Wireguard Client Service has been restarted." || echo "We could not restart the Wireguard client. Check your syntax and try again."'

# Enable VultrWireguard Tunnel on Boot
alias wgcenable='sudo systemctl enable wg-quick@wg-client0.service && echo "sudo systemctl enable wg-quick@wg-client0.service was successfully run. Wireguard Client Service is now enabled at boot." || echo "Syntax error. We could disable the wireguard client on boot. Check your syntax and try again."'

# Disable VultrWireguard Tunnel on Boot
alias wgcdisable='sudo systemctl disable wg-quick@wg-client0.service && echo "sudo systemctl disable wg-quick@wg-client0.service was successfully run. Wireguard Client Service is now disabled on boot." || echo "Syntax error. We could not disable the wireguard client on boot. Please check your synta and try again."'

# Get Status of VultrWireguard Tunnel
alias wgcstat='sudo systemctl status wg-quick@wg-client0.service && echo "Here is the status of your Wireguard Client" || echo "Could not get the status of your Wireguard Client. Check your syntax and try again."'

###########################
#### WIREGUARD SERVER #####
###########################

# Check VultrWireguard server logs
alias wgslog='sudo journalctl -eu wg-quick@wg0 && echo "Your wireguard server logs are here" || echo "Syntax error. We could not get the logs of your wireguard server. Check your syntax and try again."'

# Check VultrWireguard server debug logs
alias wgslog2="eval 'sudo journalctl -kf | grep wireguard'"
alias wgslog3='eval "sudo dmesg -wH | grep wireguard"'

# Start VultrWireguard Tunnel
alias wgsstart='sudo systemctl start wg-quick@wg0.service && echo "sudo systemctl start wg-quick@wg0.service was successfully run. Wireguard Server Service is now running." || echo "Syntax error. We could not start the Wireguard Server. Check your syntax and try again."'

# Stop VultrWireguard Tunnel
alias wgsstop='sudo systemctl stop wg-quick@wg0.service && echo "sudo systemctl stop wg-quick@wg0.service was successfully run. Wireguard Server Service has stopped running." || echo "Syntax error. We could not stop the Wireguard Server. Check your syntax and try again."'

# Reload VultrWireguard Server
alias wgsrl='sudo systemctl restart wg-quick@wg0.service && echo "sudo systemctl restart wg-quick@wg0.service was successfully run. Wireguard Server Service has been restarted." || echo "Syntax error. We could not restart the Wireguard Server. Check your syntax and try again."'

# Enable VultrWireguard Tunnel on Boot
alias wgsenable='sudo systemctl enable wg-quick@wg0.service && echo "sudo systemctl enable wg-quick@wg0.service was successfully run. Wireguard Server Service is now enabled at boot." || echo "Syntax error. We could disable the wireguard Server on boot. Check your syntax and try again."'

# Disable VultrWireguard Tunnel on Boot
alias wgsdisable='sudo systemctl disable wg-quick@wg0.service && echo "sudo systemctl disable wg-quick@wg0.service was successfully run. Wireguard Server Service is now disabled on boot." || echo "Syntax error. We could not disable the wireguard Server on boot. Please check your synta and try again."'

# Get Status of VultrWireguard Tunnel
alias wgsstat='sudo systemctl status wg-quick@wg0.service && echo "Here is the status of your Wireguard Server" || echo "Could not get the status of your Wireguard Server. Check your syntax and try again."'

###########################
########## DISKS ##########
###########################

# List all partitions by UUID
alias uuid='ls -l /dev/disk/by-uuid'

# List all partitions using blkid
alias blkid='sudo blkid'

##############################################
## WORDPRESS VULNERABILITY SCANNER (WPScan) ##
##############################################

# wpscan update
alias wpsupdate='sudo wpscan --update'

# Scan Installed Plugins
alias wpscakeplugins='sudo wpscan --url https://oddcake.net --enumerate p'
alias wpsmoplugins='sudo wpscan --url https://mcmo.is --enumerate p'
alias wpsdanranplugins='sudo wpscan --url https://danran.rocks --enumerate p'

# Scan vulnerable plugins
alias wpscakevvplugins='sudo wpscan --url https://oddcake.net --enumerate vp'
alias wpsmovplugins='sudo wpscan --url https://mcmo.is --enumerate vp'
alias wpsdanranvplugins='sudo wpscan --url https://danran.rocks --enumerate vp'

# Scan Installed Themes
alias wpscakethemes='sudo wpscan --url https://oddcake.net --enumerate t'
alias wpsmotthemes='sudo wpscan --url https://mcmo.is --enumerate t'
alias wpsdanranthemes='sudo wpscan --url https://danran.rocks --enumerate t'

# Scan vulnerable themes
alias wpscakevtthemes='sudo wpscan --url https://oddcake.net --enumerate vt'
alias wpsmovthemes='sudo wpscan --url https://mcmo.is --enumerate vt'
alias wpsdanranvthemes='sudo wpscan --url https://danran.rocks --enumerate vt'

# Scan user accounts
alias wpscakeusers='sudo wpscan --url https://oddcake.net --enumerate u'
alias wpsmousers='sudo wpscan --url https://mcmo.is --enumerate u'
alias wpsdanranusers='sudo wpscan --url https://danran.rocks --enumerate u'

# Scan vulnerable timthumb files
alias wpscakett='sudo wpscan --url https://oddcake.net --enumerate tt'
alias wpsmott='sudo wpscan --url https://mcmo.is --enumerate tt'
alias wpsdanrantt='sudo wpscan --url https://danran.rocks --enumerate tt'

###########################
###### WORDPRESS CLI ######
###########################

# make sure the "wp" command is run by the www-data user
alias wp='sudo -u www-data wp'

# Properly update worpress cli with the proper update user ($USER:$USER), run update, then change "wp" back to www-data user/group.
alias wpcliupdate='sudo chown $USER:$USER /usr/local/bin/wp && sudo wp cli update && sudo chown www-data:www-data /usr/local/bin/wp'

# Regenerate missing thumbnails using wordpress cli
alias wpcliregen='wp media regenerate --only-missing'

###########################
########### UFW ###########
###########################

# Get status of UFW
alias ustat='sudo service ufw status'

# Get list of rules from UFW.
alias urules='sudo ufw status'

# Get list of commands fro UFW
alias ulist='sudo ufw list'

###########################
######## DEBUGGING ########
###########################

# Test if modsecurity is working on all three websites (mcmo.is, Danran.rocks, oddcake.net)
alias modsectestmo="curl 'https://www.mcmo.is/?foo=/etc/passwd&bar=/bin/sh'"
alias modsectestdanran="curl 'https://danran.rocks/?foo=/etc/passwd&bar=/bin/sh'"
alias modsectestcake="curl 'https://oddcake.net/?foo=/etc/passwd&bar=/bin/sh'"

# List dovecot listening ports
alias dports='sudo ss -lnpt | grep dovecot && echo "Dovecot is listening on the above ports" || echo "Dovecot listening ports command failed. Check syntax and try again"'

# List dovecot users
alias dusers="sudo doveadm user '*'"

# Dovecot journal
alias dovjourn='sudo journalctl -eu dovecot'

# Check what is listening on which ports by running netstat
alias ns='netstat -tapn'

###########################
###### GENERAL LOGS #######
###########################

# Check the journal/logs of Nginx
alias nlog='sudo journalctl -eu nginx'

# Check the journal/logs of clamav-freshclam
alias clamlog='sudo journalctl -eu clamav-freshclam'

# Tail modsec log
alias tailmodsec='sudo tail -f /var/log/modsec_audit.log /var/log/modsec_audit.log.1'

# Cat modseclog
alias catmodsec='sudo cat /var/log/modsec_audit.log'

# View recent journal
alias journal='journalctl -xe'

# View recent journal with less
alias journalall='journalctl -xe | less'

# Show the date and time of most recent shutdown
alias shutdownlog='last -x shutdown'
alias shutdownlog2='last -5 shutdown $USER'

###########################
##### Nginx Pagespeed #####
###########################

# Test pagespeed
alias pscake='curl -I -p https://www.oddcake.net'
alias psmo='curl -I -p https://www.mcmo.is'
alias psdanran='curl -I -p https://www.danran.rocks'

# Flush/Purge pagespeed cache
alias psflushall='sudo touch /var/www/cache/pagespeed_cache/mcmo.is/cache.flush ; sudo touch /var/www/cache/pagespeed_cache/oddcake.net/cache.flush ;sudo touch /var/www/cache/pagespeed_cache/danran.rocks/cache.flush'
alias psflushmo='sudo touch /var/www/cache/pagespeed_cache/mcmo.is/cache.flush'
alias psflushcake='sudo touch /var/www/cache/pagespeed_cache/oddcake.net/cache.flush'
alias psflushdanran='sudo touch /var/www/cache/pagespeed_cache/danran.rocks/cache.flush'

###########################
###### Nginx Fastcgi ######
###########################

# Test fastcgi
alias fcgicake='curl -I https://www.oddcake.net'
alias fcgimo='curl -I https://www.mcmo.is'
alias fcgidanran='curl -I https://www.danran.rocks'

# Flush/Purge All Fastcgi Cache
alias fcgiflushall='sudo rm -Rf /var/www/cache/fastcgi_cache/danran.rocks/ ; sudo rm -Rf /var/www/cache/fastcgi_cache/oddcake.net/ ; sudo rm -Rf /var/cache/www/fastcgi_cache/mcmo.is/ && sudo service nginx restart && echo "FastCGI Cache has been flushed for all websites" || echo "FastCGI Cache Could not be flushed for all sites"'

# Flush/Purge danran.rocks Fastcgi Cache
alias fcgiflushdanran='sudo rm -Rf /var/www/cache/fastcgi_cache/danran.rocks/ && sudo service nginx restart && echo "FastCGI Cache has been flushed for danran.rocks" || echo "FastCGI Cache Could not be flushed for danran.rocks"'

# Flush/Purge oddcake.net Fastcgi Cache
alias fcgiflushcake='sudo rm -Rf /var/www/cache/fastcgi_cache/oddcake.net/ && sudo service nginx restart && echo "FastCGI Cache has been flushed for oddcake.net" || echo "FastCGI Cache Could not be flushed for oddcake.net"'

# Flush/Purge mcmo.is Fastcgi Cache
alias fcgiflushmo='sudo rm -Rf /var/www/cache/fastcgi_cache/mcmo.is/ && sudo service nginx restart && echo "FastCGI Cache has been flushed for mcmo.is" || echo "FastCGI Cache Could not be flushed for mcmo.is"'

### FASTCGI CACHING ON/OFF

# Turn FastCGI Caching on for McMo.is
alias fcgimoon='sudo sed -i "s|fastcgi_cache off;|#fastcgi_cache off;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo sed -i "s|#fastcgi_cache mcmo.is;|fastcgi_cache mcmo.is;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo service nginx restart && echo "FastCGI for McMo.is is now on and Nginx has been reloaded." || echo "Fastcgi was NOT turned on for McMo.is. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'

# Turn FastCGI Caching off for McMo.is
alias fcgimooff='sudo sed -i "s|#fastcgi_cache off;|fastcgi_cache off;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo sed -i "s|fastcgi_cache mcmo.is;|#fastcgi_cache mcmo.is;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo service nginx restart && echo "FastCGI for McMo.is is now off and Nginx has been reloaded." || echo "Fastcgi was NOT turned off for McMo.is. Nginx probably was not reloaded. Maybe it is already off? Check your syntax and try again"'

# Turn FastCGI Caching on for oddcake.net
alias fcgicakeon='sudo sed -i "s|fastcgi_cache off;|#fastcgi_cache off;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo sed -i "s|#fastcgi_cache oddcake.net;|fastcgi_cache oddcake.net;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo service nginx restart && echo "FastCGI for oddcake.net is now on and Nginx has been reloaded." || echo "Fastcgi was NOT turned on for oddcake.net. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'

# Turn FastCGI Caching off for oddcake.net
alias fcgicakeoff='sudo sed -i "s|#fastcgi_cache off;|fastcgi_cache off;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo sed -i "s|fastcgi_cache oddcake.net;|#fastcgi_cache oddcake.net;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo service nginx restart && echo "FastCGI for oddcake.net is now off and Nginx has been reloaded." || echo "Fastcgi was NOT turned off for oddcake.net. Nginx probably was not reloaded. Maybe it is already off? Check your syntax and try again"'

# Turn FastCGI Caching on for danran.rocks
alias fcgidanranon='sudo sed -i "s|fastcgi_cache off;|#fastcgi_cache off;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo sed -i "s|#fastcgi_cache danran.rocks;|fastcgi_cache danran.rocks;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo service nginx restart && echo "FastCGI for danran.rocks is now on and Nginx has been reloaded." || echo "Fastcgi was NOT turned on for danran.rocks. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'

# Turn FastCGI Caching off for danran.rocks
alias fcgidanranoff='sudo sed -i "s|#fastcgi_cache off;|fastcgi_cache off;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo sed -i "s|fastcgi_cache danran.rocks;|#fastcgi_cache danran.rocks;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo service nginx restart && echo "FastCGI for danran.rocks is now off and Nginx has been reloaded." || echo "Fastcgi was NOT turned off for danran.rocks. Nginx probably was not reloaded. Maybe it is already off? Check your syntax and try again"'

### FASTCGI CACHING BYPASS ON/OFF

# Enable FastCGI Bypass on McMo.is
alias fcgibymo='sudo sed -i "s|fastcgi_cache_bypass $skip_cache;|#fastcgi_cache_bypass $skip_cache;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo sed -i "s|fastcgi_no_cache $skip_cache;|#fastcgi_no_cache $skip_cache;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo sed -i "s|#fastcgi_cache_bypass 1;|fastcgi_cache_bypass 1;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo sed -i "s|#fastcgi_no_cache 1;|fastcgi_no_cache 1;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo service nginx restart && echo "FastCGI for McMo.is is now being bypassed. Nginx has been reloaded.." || echo "Fastcgi bypass was NOT turned on for McMo.is. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'
# Disable FastCGI Bypass on McMo.is
alias fcgiunbymo='sudo sed -i "s|#fastcgi_cache_bypass $skip_cache;|fastcgi_cache_bypass $skip_cache;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo sed -i "s|#fastcgi_no_cache $skip_cache;|fastcgi_no_cache $skip_cache;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo sed -i "s|fastcgi_cache_bypass 1;|#fastcgi_cache_bypass 1;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo sed -i "s|fastcgi_no_cache 1;|#fastcgi_no_cache 1;|g" /etc/nginx/sites-available/03-mcmo.is.conf && sudo service nginx restart && echo "FastCGI for McMo.is is NOT being bypassed. Nginx has been reloaded.." || echo "Fastcgi bypass was not disabled for McMo.is. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'

# Enable FastCGI Bypass on danran.rocks
alias fcgibydanran='sudo sed -i "s|fastcgi_cache_bypass $skip_cache;|#fastcgi_cache_bypass $skip_cache;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo sed -i "s|fastcgi_no_cache $skip_cache;|#fastcgi_no_cache $skip_cache;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo sed -i "s|#fastcgi_cache_bypass 1;|fastcgi_cache_bypass 1;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo sed -i "s|#fastcgi_no_cache 1;|fastcgi_no_cache 1;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo service nginx restart && echo "FastCGI for danran.rocks is now being bypassed. Nginx has been reloaded.." || echo "Fastcgi bypass was NOT turned on for danran.rocks. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'
# Disable FastCGI Bypass on danran.rocks
alias fcgiunbydanran='sudo sed -i "s|#fastcgi_cache_bypass $skip_cache;|fastcgi_cache_bypass $skip_cache;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo sed -i "s|#fastcgi_no_cache $skip_cache;|fastcgi_no_cache $skip_cache;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo sed -i "s|fastcgi_cache_bypass 1;|#fastcgi_cache_bypass 1;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo sed -i "s|fastcgi_no_cache 1;|#fastcgi_no_cache 1;|g" /etc/nginx/sites-available/02-danran.rocks.conf && sudo service nginx restart && echo "FastCGI for danran.rocks is NOT being bypassed. Nginx has been reloaded.." || echo "Fastcgi bypass was not disabled for danran.rocks. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'

# Enable FastCGI Bypass on oddcake.net
alias fcgibycake='sudo sed -i "s|fastcgi_cache_bypass $skip_cache;|#fastcgi_cache_bypass $skip_cache;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo sed -i "s|fastcgi_no_cache $skip_cache;|#fastcgi_no_cache $skip_cache;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo sed -i "s|#fastcgi_cache_bypass 1;|fastcgi_cache_bypass 1;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo sed -i "s|#fastcgi_no_cache 1;|fastcgi_no_cache 1;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo service nginx restart && echo "FastCGI for oddcake.net is now being bypassed. Nginx has been reloaded.." || echo "Fastcgi bypass was NOT turned on for oddcake.net. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'
# Disable FastCGI Bypass on oddcake.net
alias fcgiunbycake='sudo sed -i "s|#fastcgi_cache_bypass $skip_cache;|fastcgi_cache_bypass $skip_cache;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo sed -i "s|#fastcgi_no_cache $skip_cache;|fastcgi_no_cache $skip_cache;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo sed -i "s|fastcgi_cache_bypass 1;|#fastcgi_cache_bypass 1;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo sed -i "s|fastcgi_no_cache 1;|#fastcgi_no_cache 1;|g" /etc/nginx/sites-available/01-oddcake.net.conf && sudo service nginx restart && echo "FastCGI for oddcake.net is is NOT being bypassed. Nginx has been reloaded.." || echo "Fastcgi bypass was not disabled for oddcake.net. Nginx probably was not reloaded. Maybe it is already on? Check your syntax and try again"'

###########################
###### Nginx Brotli #######
###########################

# Test Brotli Compression
alias brmo='curl -IL https://mcmo.is -H "Accept-Encoding: br"'
alias brcake='curl -IL https://oddcake.net -H "Accept-Encoding: br"'
alias brdanran='curl -IL https://danran.rocks -H "Accept-Encoding: br"'

###########################
###### Nginx Gzip #######
###########################

# Test Gzip Compression
alias gzmo='curl -IL https://mcmo.is -H "Accept-Encoding: gzip"'
alias gzcake='curl -IL https://oddcake.net -H "Accept-Encoding: gzip"'
alias gzdanran='curl -IL https://danran.rocks -H "Accept-Encoding: gzip"'

###########################
######### FAIL2BAN ########
###########################

# Get Status of fail2ban
alias f2bstat='sudo systemctl status fail2ban && echo "Fail2ban Status is ^^^^^^^" || echo "Fail2ban could get its status, is it running? Check your syntax."'

# Restart fail2ban
alias f2brl='sudo systemctl restart fail2ban && echo "fail2ban was restarted" || echo "fail2ban could NOT RESTART. Check your syntax."'

# Start fail2ban
alias f2bstart='sudo systemctl start fail2ban && echo "fail2ban was started" || echo "fail2ban could NOT START. Check your syntax."'

# Stop fail2ban
alias f2bstop='sudo systemctl start fail2ban && echo "fail2ban was stopped" || echo "fail2ban could NOT STOP. Check your syntax."'

# Check client jails of fail2ban
alias f2bjails='sudo fail2ban-client status && echo "Fail2ban is running these jails" || echo "Fail2ban couldn NOT check which jails are running. Is fail2ban broken?"'

# Check client sshd jail of fail2ban
alias f2bsshdstat='sudo fail2ban-client status sshd && echo "The status of the SSHD jail is..." || echo "The state of the SSHD Jail could not be read. Is fail2ban working?"'

# Check all banned IP's in fail2ban
alias f2bbanned='sudo zgrep "Ban" /var/log/fail2ban.log* && echo "Fail2ban has banned the following ip addresses..." || echo "Fail2ban could not check the banned IP addresses. Is fail2ban working?"'
alias f2bbanned2='sudo iptables -L && echo "Here are the iptables. Notice the banned fail2ban IPs." || echo "We could not get the fail2ban iptables. Check your syntax."'

# F2BACTIVEBANS
# Active Bans - List complete line of IP Tables for Active Bans (this requires having the f2bactivebans.sh script in your /usr/local/bin folder.
# The script contains this command: sudo iptables -L -n | awk '$1=="REJECT" && $4!="0.0.0.0/0"'
# The command the script contains was found on: https://serverfault.com/questions/841183/how-to-show-all-banned-ip-with-fail2ban
alias f2bactivebans='sudo /usr/local/bin/f2bactivebans.sh'

# Reset all IP's and logs by fail2ban to factory settings
# This requires https://github.com/mitchellkrogza/fail2ban-useful-scripts/raw/master/f2b-reset-log-db.sh in /usr/local/bin
# This script clears the log file and database of Fail2Ban This resets Fail2Ban to a completely clean state Useful to use 
# after you have finished testing all your jails and completed your initial setup of Fail2Ban and are now putting the server into LIVE mode
alias f2breset='sudo /usr/local/bin/f2b-reset-log-db.sh'

# Unban all IP's banned by fail2ban
alias f2bunbanall='sudo fail2ban-client unban --all && echo "Success! All fail2ban IPs have been unbanned" || echo "Fail2ban could not unban any clients. Check your syntax."'

# Ban specific IP address accross all jails. 
# Syntax = f2bbanip [IP address to ban]
# Note: This command only works if you have "fail2ban_all_jail_ip_banner.sh" script in /usr/local/bin.
# You can find the script at https://unix.stackexchange.com/questions/751452/unix-command-and-bash-alias-or-script-to-band-unban-ip-addresses-in-fail2ban-w/751468#751468
alias f2bbanip='sudo /usr/local/bin/fail2ban_all_jail_ip_banner.sh'

# Unban specific IP address accross all jails
# Syntax: f2bunbanip [IP address to ban]
alias f2bunbanip='sudo fail2ban-client unban'

# Quick access to fail2bans jail.local config file
alias f2bjaillocal='sudo nano -c /etc/fail2ban/jail.local'

# Show fail2ban logs with cat command
alias f2blogs='sudo cat /var/log/fail2ban.log'

# Recursively show fail2ban logs with "tail -f /var/log/fail2ban.log" command.
alias f2blogtail='sudo tail -f /var/log/fail2ban.log'

# Show fail2ban logs with tail (omit the -f flag)
alias f2blogtail2='sudo tail /var/log/fail2ban.log'

###########################
######### DOVECOT #########
###########################

# Dovecot Status
alias dcstat='sudo systemctl status dovecot && echo "^^^^ Here is the status of Dovecot" || echo "We could not get the status of Dovecot"'

# Dovecot Start
alias dcstart='sudo systemctl start dovecot && echo "Dovecot started correctly!" || echo "Dovecot did not start correctly!!!"'

# Dovecot Stop
alias dcstop='sudo systemctl stop dovecot && echo "Dovecot stopped correctly!" || echo "Dovecot could not stop correctly!!!"'

# Dovecot Restart
alias dcrl='sudo systemctl restart dovecot && echo "Dovecot restarted correctly! YAY!" || echo "Dovecot didnt restart correctly!!!"'

# Show dovecot settings
alias dcsettings='dovecot -n && echo "Your current dovecot settings are..." || echo "The Doevecot settings could not be read. Is dovecot working?"'

# Show dovecot log locations
alias dcloglocations='sudo doveadm log find && echo "Your Dovecot logs are located at..." || echo "We couldn not find your Dovecot log locations, could you please check your settings and try again?"'

# Show last Dovecot errors by printing the last 1000 errors of a running Dovecot.
alias dcerrors='sudo doveadm log errors && echo "Dovecot has the following errors in its log..." || echo "Dovecot could not print the error log. Is Dovecot running?"'

###########################
######### POSTFIX #########
###########################

# Postfix Version
alias pfv='postconf mail_version && echo "^^^^ Here is your Postfix Version" || echo "We could not get your Postfix Version"'

# Postfix status
alias pfstat='sudo service postfix status && echo "^^^^ Here is the status of Postfix!" || echo "We could not get the status of Postfix!"'

# Start Postfix
alias pfstart='sudo systemctl start postfix && echo "Postfix started correctly! YAY!" || echo "Postfix did not start correctly!!!"'

# Stop Postfix
alias pfstop='sudo systemctl stop postfix && echo "Postfix stopped correctly! YAY!" || echo "Postfix did not stop correctly!"'

# Restart Postfix
alias pfrl='sudo systemctl restart postfix && echo "Postfix restarted correctly! YAY!" || echo "Postfix didnt restart correctly!"'

# [Whitelist] Edit the postfix whitelist
alias pfwl='sudo nano /etc/postfix/rbl_override'

# [Whitelist] Create the postfix override (rbl_override.db) database, or update it with new rules from /etc/postfix/rbl_override using the postmap command
alias pfwldb='sudo postmap /etc/postfix/rbl_override && echo "Success! Postmap has created (or updated) your postfix whitelist database located at /etc/postfix/rbl_override. Your new settings have been whitelisted." || echo " Failure! Postmap was unable to update your whitelists (/etc/postfix/rbl_override) database. Check your syntax in /etc/postfix/rbl_override and try again."'

# Edit the postfix mail configuration file main.cf
alias pfmain='sudo nano /etc/postfix/main.cf'

#  Show list of supported packages in postfix
alias pfsupport='postconf -m && echo "Postfix supports the following..." || echo "We could not show you postfix supported applications for some reason. Strange..."'

# Open postfix header checks file for banning certain headers.
alias pfheaderban='sudo nano /etc/postfix/header_checks'

# Open postfix body checks file for banning certain lines in a body.
alias pfbodyban='sudo nano /etc/postfix/body_checks'

# Check the postfix config files for errors
alias postchk='sudo postfix check'

################################
### PFLOGSUMM (POSTFIX LOGS) ###
################################

# Generate Postfix log report for today
alias pflogday='sudo pflogsumm -d today /var/log/mail.log'

# Generate Postfix Log report for today and emit "problem" reports (Bounces, defers, warnings, rejects) before "normal" stats, using the --problems-first flag.
alias pflogday2='sudo pflogsumm -d today /var/log/mail.log --problems-first'

# Generate Postfix log report for today and append the email from address to each listing in the reject report, by using the --rej-add-from flag.
alias pflogday3='sudo pflogsumm -d today /var/log/mail.log --rej-add-from'

# Generate Postfix log report for today and show the full reason in reject summaries, by using the --verbose-msg-detail flag
alias pflogday4='sudo pflogsumm -d today /var/log/mail.log --rej-add-from --verbose-msg-detail'

# Generate Postfix log report for yesterday
alias pflogyesterday='sudo pflogsumm -d yesterday /var/log/mail.log'

# Generate Postfix log report for this week
alias pflogweek='sudo pflogsumm /var/log/mail.log'

###########################
######## OPENDMARC ########
###########################

# Check status of OpenDmarc
alias odmstat='sudo systemctl status opendmarc && echo "Here is the status of Opendmarc..." || echo "Dovecot could get status of Opendmarc. Is Opendmarc running?"'

# Restart OpenDmarc
alias odmrl='sudo systemctl restart opendmarc && echo "Opendmarc has restarted successfully..." || echo "Opendmarc could not restart. Is Opendmarc running?"'

# Stop OpenDmarc
alias odmstop='sudo systemctl stop opendmarc && echo "Opendmarc has stopped successfully..." || echo "Opendmarc could not stop. Is Opendmarc running?"'

# Start OpenDmarc
alias odmstart='sudo systemctl start opendmarc && echo "Opendmarc has started successfully..." || echo "Opendmarc could not start. Is Opendmarc broken?"'

# Open opendmarc conf file
alias odmconf='sudo nano /etc/opendmarc.conf'

# Whitelist opendmarc ip addresses
alias odmwl='sudo nano /etc/opendmarc/ignore.hosts'

###########################
########## CLAM ###########
###########################

# There will be two systemd services installed by ClamAV:
# 1) clamav-daemon.service: the Clam AntiVirus userspace daemon
# 2) clamav-freshclam.service: the ClamAV virus database updater

# Start clamav-freshclam.service
alias freshclamstart='systemctl start clamav-freshclam && echo "clamav-freshclam has started..." || echo "clamav-freshclam could not start. Is clamav-freshclam broken?"'

# Stop clamav-freshclam.service
alias freshclamstop='systemctl stop clamav-freshclam && echo "clamav-freshclam has stopped..." || echo "clamav-freshclam could not stop. Is clamav-freshclam broken?"'

# Update clamav-freshclam.service
alias freshclamupdate='sudo freshclam && echo "clamav-freshclam has been updated..." || echo "clamav-freshclam has not been updated. Is clamav-freshclam update broken?"'

# Check the status of clamav-freshclam.service
alias freshclamstat='systemctl status clamav-freshclam && echo "clamav-freshclam has a status of..." || echo "clamav-freshclam could not show its status. Is clamav-freshclam broken?"'

# Restart clamav-freshclam.service
alias freshclamrl='systemctl restart clamav-freshclam && echo "clamav-freshclam has restarted..." || echo "clamav-freshclam could not restart. Is clamav-freshclam broken?"'

# Check the journal/log of clamav-freshclam
alias freshclamlog='sudo journalctl -eu clamav-freshclam && echo "clamav-freshclams logs are here..." || echo "clamav-freshclam could not show its journal/log. Are clamav-freshclam  logs broken?"'

# Check the status of clamav-daemon
alias clamdstat='sudo systemctl status clamav-daemon && echo "clamav-daemon has a status of..." || echo "clamav-daemon could not show its status. Is clamav-daemon broken?"'

# Restart clamav-daemon
alias clamdrl='sudo systemctl restart clamav-daemon && echo "clamav-daemon has restarted..." || echo "clamav-daemon could not restart. Is clamav-daemon broken?"'

# Start a virus scan with clamav-daemon.service's clamdscan.
alias clamdscan='sudo clamdscan --fdpass / && echo "Clamdscan is searching for viruses..." || echo "Clamdscan could not scan for viruses. Is clamdscan virus scan broken?"'

###########################
######### Amavis ##########
###########################

# Check the status of amavis
alias amavisstat='systemctl status amavis && echo "Amavis has a status of..." || echo "Amavis could not show its status. Is Amavis broken?"'

# Restart Amavis
alias amavisrl='systemctl restart amavis && echo "Amavis has restarted..." || echo "Amavis could not restart. Is Amavis broken?"'

# Start Amavis
alias amavisstart='systemctl start amavis && echo "Amavis has started..." || echo "Amavis could not start. Is Amavis broken?"'

# Stop Amavis
alias amavisstop='systemctl stop amavis && echo "Amavis has stopped..." || echo "Amavis could not stop. Is Amavis running?"'

# Check the journal/logs of Amavis
alias amavislog='sudo journalctl -eu amavis'

# Check the amount of processess amavis is using. # It should be 4 for 4 cores.
alias amavisprocess='sudo amavisd-nanny'

###########################
######## Postgrey #########
###########################

# Start postgrey
alias pgstart='sudo systemctl start postgrey && echo "Postgrey has started ..." || echo "Postgrey could not start. Check syntax for errors."'

# Stop postgrey
alias pgstop='sudo systemctl stop postgrey && echo "Postgrey has stopped ..." || echo "Postgrey could not stop. Check syntax for errors."'

# Restart postgrey
alias pgrl='sudo systemctl restart postgrey && echo "Postgrey has restarted ..." || echo "Postgrey could not restart. Check syntax for errors."'

# Enable Postgrey at boot time
alias pgenable='sudo systemctl enable postgrey && echo "Postgrey is not enabled at boot time" || echo "Postgrey could not enable itself at boot time. Check for errors."'

# Disable Postgrey at boot time
alias pgdisable='sudo systemctl disable postgrey && echo "Postgrey is now disabled at boot time" || echo "Postgrey could not disblae itself at boot time. Check for errors."'

# Check the ports that postgrey is listening on.
alias pglisten='sudo netstat -lnpt | grep postgrey && echo "Netstat has checked postgreys listening ports and they are ^^^^^^" || echo "Netstat could not check postgreys listening ports. Is it working?"'
alias pglisten2='sudo netstat -lnpt | grep 10023 && echo "Netstat has checked postgreys listening ports and they are ^^^^^^" || echo "Netstat could not check postgreys listening ports. Is it working?"'

# Check postgrey logs
alias pglogs='sudo journalctl -u postgrey && echo "Here are the postgrey logs ^^^^^^^" || echo "Postgrey could not show you logs. Check for errors."'

# Edit the postgrey clients whitelist. Add hostnames you want to whitelist, to this file.
alias pgclientwl='sudo nano /etc/postgrey/whitelist_clients'

# Edit the postgrey recipient whitelist (allow outgoing). Add recipient addresses you want to whitelist, to this file.
alias pgrecipwl='sudo nano /etc/postgrey/whitelist_recipients'

###########################
###### POLICY SERVER ######
###########################

# Restart rate-limiting policy server
alias psrl='sudo systemctl restart policyd-rate-limit && echo "The rate-limiting policy server has restarted successfully." || echo "The rate-limiting policy server could not restart. Is it running?"'

# Check the log of your policy daemin (particularly after sending an email from your email client. https://www.linuxbabe.com/mail-server/how-to-stop-your-emails-being-marked-as-spam)
alias pslog='sudo journalctl -eu policyd-rate-limit && echo "Here are the logs of the policy daemon..." || echo "The policy daemon could not show you logs."'

# Delete old records from the policy rate limit database.
alias psclean='sudo policyd-rate-limit --clean && echo "Policy rate limit database has been cleaned." || echo "The policy rate limit database could not be cleaned."'

###########################
########## SYSTEM #########
###########################

# Show all system users in a list format
alias sysusers='sudo cat /etc/shadow && echo "Here are the users for your system..." || echo "We could not display your systems users. Check your syntax and try again."'

# Reload the system control daemon
alias scdrl='sudo systemctl daemon-reload && echo "System daemon has been reloaded" || echo "We could not reload the sytem daemon. Check for errors."'

# Check your current IP whitelist/blacklist score of dnswl.org
alias wlscore='host 6.125.28.149.list.dnswl.org && echo "Your whitelist score has been checked and is..." || echo "We could not check your score on dnswl.org. Check for errors."'

###########################
########### APT ###########
###########################

# Show all manually installed (packages installed by $USER with "apt install" packages) packages.
alias installed='apt-mark showmanual && echo "Here are the packages you installed..." || echo "We couldn not display the installed packages. Check your syntax."'

###########################
######## MAN PAGES ########
###########################

alias man-image='cat /usr/local/bin/image-readme.txt'

###########################
#### RAM & DISK SPACE #####
###########################

alias ram='free -m && echo "Your ram stats are as follows..." || echo "We could not get your ram stats. Check your syntax and try again"'
alias swap='swapon --show'

###########################
#### Nginx Beautifier #####
###########################

alias npretty='sudo nginxfmt.py -i 4'

###########################
##### Mysql / Maridb ######
###########################

# Check Queries Per Second (QPS) in Mysql, which is a metric that monitors the load on the database server.
alias sqlq='sudo mysqladmin status'

###########################
##### Wordpress CLI #######
###########################

# Regenerate all thumbnails
alias regen='wp media regenerate --yes'

###########################
######### System ##########
###########################

# Check the kernel version number
alias kernal='uname -r'

###########################
######### Unbound #########
###########################

# Unbound status
alias unboundstat='sudo service unbound status'

# Unbound start
alias unboundstart='sudo service unbound start'

# Unbound stop
alias unboundstop='sudo service unbound stop'

# Unbound restart
alias unboundrl='sudo service unbound restart'

###########################
########## NGINX ##########
###########################

# Hold nginx from upgrading due to Mod_security having to be rebuilt with upgrade
alias nhold='sudo apt-mark hold nginx && echo "Your Nginx packages are now being held" || echo "We could not put a hold on your Nginx Upgrades"'

# Release nginx from a Hold to allow for upgrading packages.
alias nrelease='sudo apt-mark unhold nginx && echo "Your Nginx Packages are released and can now be upgraded" || echo "We couldn NOT  release your Nginx packages from a hold. Check your syntax and try again."'

# Quick access to nginx.conf
alias nconf='sudo nano -c /etc/nginx/nginx.conf'

# Quick access to sites available
alias savail='cd /etc/nginx/sites-available/'

# Quick access to Nginx conf.d folder
alias nconfd='cd /etc/nginx/conf.d/'

# Quick access to totemlife.xyz in sites available
alias vtotem='sudo nano -c /etc/nginx/sites-available/totemlife.xyz.conf'

# Quick access to shamigfrom212.xyz in sites available
alias vshamig='sudo nano -c /etc/nginx/sites-available/shamigfrom212.xyz.conf'

# Quick access to danranda.com in sites available
alias vdan='sudo nano -c /etc/nginx/sites-available/danranda.com.conf'

# Quick access to oddcake.net in sites available
alias vcake='sudo nano -c /etc/nginx/sites-available/01-oddcake.net.conf'

# Quick access to danran.rocks in sites available
alias vdanran='sudo nano -c /etc/nginx/sites-available/02-danran.rocks.conf'

# Quick access to mcmo.is in sites available
alias vmo='sudo nano -c /etc/nginx/sites-available/03-mcmo.is.conf'

# Quick access to /etc/nginx/sites-available/default
alias vdef='sudo nano -c /etc/nginx/sites-available/default'

# Quick access to /etc/nginx/sites-available/bitchtits.live.conf
alias vbitch='sudo nano -c /etc/nginx/sites-available/bitchtits.live.conf'

### Copy secure and insecure configuration files to active configuration.

## Update 01-oddcake.net.conf.insecure/02-danran.rocks.insecure/03-mcmo.is.insecure from current default corresponding configuration files (e.g. cp /etc/nginx/sites-available/01-oddcake.net.conf to /etc/nginx/sites-available/01-oddcake.net.conf.insecure).

# Update 01-oddcake.net.conf.insecure/secure from current working config file.
alias cakeupins='sudo cp /etc/nginx/sites-available/01-oddcake.net.conf /etc/nginx/sites-available/01-oddcake.net.conf.insecure && echo "01-oddcake.net.conf.insecure was updated from current configuration." || echo "01-oddcake.net.conf.insecure was not updated from current configuration. Please check cp syntax and try again."'
alias cakeupsec='sudo cp /etc/nginx/sites-available/01-oddcake.net.conf /etc/nginx/sites-available/01-oddcake.net.conf.secure && echo "01-oddcake.net.conf.secure was updated from current configuration." || echo "01-oddcake.net.conf.secure was not updated from current configuration. Please check cp syntax and try again."'

# Update 02-danran.rocks.conf.insecure/secure from current working config file.
alias danupins='sudo cp /etc/nginx/sites-available/02-danran.rocks.conf /etc/nginx/sites-available/02-danran.rocks.conf.insecure && echo "02-danran.rocks.conf.insecure was updated from current configuration." || echo "02-danran.rocks.conf.insecure was not updated from current 02-danran.rocks.conf file. Please check CP syntax and try again."'
alias danupsec='sudo cp /etc/nginx/sites-available/02-danran.rocks.conf /etc/nginx/sites-available/02-danran.rocks.conf.secure && echo "02-danran.rocks.conf.secure was updated from current configuration." || echo "02-danran.rocks.conf.secure was not updated from current 02-danran.rocks.conf configuration file. Please check CP syntax and try again."'

# Update 03-mcmo.is.conf.insecure/secure from current working config file.
alias moupins='sudo cp /etc/nginx/sites-available/03-mcmo.is.conf /etc/nginx/sites-available/03-mcmo.is.conf.insecure && echo "03-mcmo.is.conf.insecure was updated from current configuration." || echo "03-mcmo.is.conf.insecure was not updated current config. Please check CP syntax and try again."'
alias moupsec='sudo cp /etc/nginx/sites-available/03-mcmo.is.conf /etc/nginx/sites-available/03-mcmo.is.conf.secure && echo "03-mcmo.is.conf.secure was updated from current configuration." || echo "03-mcmo.is.conf.secure was not updated current config. Please check CP syntax and try again."'

### Backup *.conf~secure and *.conf.insecure files from corresponding file

# Backup 01-oddcake.net.conf.secure and 01-oddcake.net.conf.insecure files to .bak files.
alias cakebakins='sudo cp /etc/nginx/sites-available/01-oddcake.net.conf.insecure /etc/nginx/sites-available/01-oddcake.net.conf.insecure.bak && echo "01-oddcake.net.conf.insecure was backed up to 01-oddcake.net.conf.insecure.bak" || echo "01-oddcake.net.conf.insecure was not backed up to 01-oddcake.net.conf.insecure.bak. Check your CP command and try again."'
alias cakebaksec='sudo cp /etc/nginx/sites-available/01-oddcake.net.conf.secure /etc/nginx/sites-available/01-oddcake.net.conf.secure.bak && echo "01-oddcake.net.conf.secure was backed up to 01-oddcake.net.conf.secure.bak" || echo "01-oddcake.net.conf.secure was not backed up to 01-oddcake.net.conf.secure.bak. Check your CP command and try again."'

# Backup 02-danran.rocks.conf.secure and 02-danran.rocks.conf.insecure files to .bak files.
alias danbakins='sudo cp /etc/nginx/sites-available/02-danran.rocks.conf.insecure /etc/nginx/sites-available/02-danran.rocks.conf.insecure.bak && echo "02-danran.rocks.net.conf.insecure was backed up to 02-danran.rocks.conf.insecure.bak" || echo "02-danran.rocks.conf.insecure was not backed up to 02-danran.rocks.conf.insecure.bak. Check your CP command and try again."'
alias danbaksec='sudo cp /etc/nginx/sites-available/02-danran.rocks.conf.secure /etc/nginx/sites-available/02-danran.rocks.conf.secure.bak && echo "02-danran.rocks.conf.secure was backed up to 02-danran.rocks.conf.secure.bak" || echo "02-oddcake.net.conf.secure was not backed up to 02-danan.rocks.conf.secure.bak. Check your CP command and try again."'

# Backup 03-mcmo.is.conf.secure & 03-mcmo.is.conf.insecure files to .bak files.
alias mobakins='sudo cp /etc/nginx/sites-available/03-mcmo.is.conf.insecure /etc/nginx/sites-available/03-mcmo.is.conf.insecure.bak && echo "03-mcmo.is.conf.insecure was backed up to 03-mcmo.is.conf.insecure.bak" || echo "03-mcmo.is.conf.insecure was not backed up to 03-mcmo.is.conf.insecure.bak. Check your CP command and try again."'
alias mobaksec='sudo cp /etc/nginx/sites-available/03-mcmo.is.conf.secure /etc/nginx/sites-available/03-mcmo.is.conf.secure.bak && echo "03-mcmo.is.conf.secure was backed up to 03-mcmo.is.conf.secure.bak" || echo "03-mcmo.is.conf.secure was not backed up to 03-mcmo.is.conf.secure.bak. Check your CP command and try again."'

###########################
## NGINX - SITES ENABLED ##
###########################

# Enable oddcake.net.conf
alias ecake='sudo ln -s /etc/nginx/sites-available/01-oddcake.net.conf /etc/nginx/sites-enabled/01-oddcake.net.conf && echo "OddCake.net is enabled correctly. Please reload EngineX" || echo "Syntax Error, Oddcake.net not enabled"'

# Enable mcmo.is.conf
alias emo='sudo ln -s /etc/nginx/sites-available/03-mcmo.is.conf /etc/nginx/sites-enabled/03-mcmo.is.conf && echo "McMo.is is enabled correctly. Please reload nginx." || echo "Syntax Error, Mcmo.is did not enabled correctly"'

# Enable danran.rocks.conf
alias edanran='sudo ln -s /etc/nginx/sites-available/02-danran.rocks.conf /etc/nginx/sites-enabled/02-danran.rocks.conf && echo "Danran.rocks enabled correctly. Please reload nginx." || echo "Syntax Error, Danran.rocks didnt enable correctly"'

# Enable /etc/nginx/sites-available/default
alias edef='sudo ln -s /etc/nginx/sites-available/default /etc/nginx/sites-enabled/default && echo "default nginx site enabled correctly. Please reload nginx." || echo "Syntax Error. Default nginx site not enabled. Please check your settings and try again."'

# Disable oddcake.net.conf
alias dcake='sudo rm /etc/nginx/sites-enabled/01-oddcake.net.conf && echo "OddCake.net disabled Correctly please reload nginx" || echo "Syntax Error, Oddcake.net not disabled and is still active."'

# Disable mcmo.is.conf
alias dmo='sudo rm /etc/nginx/sites-enabled/03-mcmo.is.conf && echo "McMo.is was disabled correctly. Please reload EngineX" || echo "Syntax Error, mcmo.is was not disabled and is still active"'

# Disable danran.rocks
alias ddanran='sudo rm /etc/nginx/sites-enabled/02-danran.rocks.conf && echo "Danran.rocks was disabled correctly. Please reload EngineX." || echo "Syntax Error, Danran.rocks was not disabled, and is still active."'

# Disable /etc/nginx/sites-enabled/default
alias ddef='sudo rm /etc/nginx/sites-enabled/default && echo "Default EngineX conf file has been disabled. Please reload nginx." || echo "Syntax Error. Default nginx conf file has not been disabled. Please check your settings and try again."'

###########################
###### NGINX MODULES ######
###########################

# Enable Modules
alias em00='sudo ln -s /etc/nginx/modules-available/00-mod-http-security-headers.conf /etc/nginx/modules-enabled/00-mod-http-security-headers.conf'
alias em01='sudo ln -s /etc/nginx/modules-available/01-mod-http-modsecurity.conf /etc/nginx/modules-enabled/01-mod-http-modsecurity.conf'
alias em02='sudo ln -s /etc/nginx/modules-available/02-mod-http-brotli-filter.conf /etc/nginx/modules-enabled/02-mod-http-brotli-filter.conf'
alias em03='sudo ln -s /etc/nginx/modules-available/03-mod-http-brotli-static.conf /etc/nginx/modules-enabled/03-mod-http-brotli-static.conf'
alias em04='sudo ln -s /etc/nginx/modules-available/04-mod-http-cache-purge.conf /etc/nginx/modules-enabled/04-mod-http-cache-purge.conf'
alias em05='sudo ln -s /etc/nginx/modules-available/05-mod-pagespeed.conf /etc/nginx/modules-enabled/05-mod-pagespeed.conf'

# Disable Modules
alias dm00='sudo rm /etc/nginx/modules-enabled/00-mod-http-security-headers.conf'
alias dm01='sudo rm /etc/nginx/modules-enabled/01-mod-http-modsecurity.conf'
alias dm02='sudo rm /etc/nginx/modules-enabled/02-mod-http-brotli-filter.conf'
alias dm03='sudo rm /etc/nginx/modules-enabled/03-mod-http-brotli-static.conf'
alias dm04='sudo rm /etc/nginx/modules-enabled/04-mod-http-cache-purge.conf'
alias dm05='sudo rm /etc/nginx/modules-enabled/05-mod-pagespeed.conf'

############################
###### NGINX - MODULES #####
############################

##
# MODULE - PAGESPEED
##

# Open Pagespeed configuration file
alias psconf='sudo nano /etc/nginx/pagespeed.conf'

# Cat pagespeed configuration file
alias pscat='sudo cat /etc/nginx/pagespeed.conf'

# Flush whole (legacy mode) pagespeed cache
alias psflush='sudo touch /usr/share/nginx/ngx_pagespeed_cache/cache.flush && echo "Pagespeed flushed its cache successfully!" || echo "Their was a problem flushing the pagespeed cache. Check your syntax and try again."'

##
# MODULE - MODSECURITY
##

# Turn on Modsecurity
alias modsecon='sudo sed -i "s|modsecurity off|modsecurity on|g" /etc/nginx/nginx.conf && sudo service nginx restart && echo "Modsecurity is now on and Nginx has been reloaded." || echo "Modsecurity was not turned on. Nginx probably was not reloaded. Maybe Modsec is already on? Check your syntax and try again"'

# Turn off Modsecurity
alias modsecoff='sudo sed -i "s|modsecurity on|modsecurity off|g" /etc/nginx/nginx.conf && sudo service nginx restart && echo "Modsecurity is now off and Nginx has been reloaded." || echo "Modsecurity was NOT turned off. Nginx probably was not reloaded. Maybe Modsec is already off? Check your syntax and try again."'

###########################
######## NETPLAN ##########
###########################

## Surf Soho Wi-Fi
#  ---------------

# Connect the Pi to the Surf Soho Wi-Fi. Note: Remember to apply changes with netplan.
alias surfwifi='sudo mv /etc/netplan/*_only* /etc/netplan/surf-surfdns_only-wifi && sudo cp /etc/netplan/configs/surf.surfdns.wifi /etc/netplan/50-cloud-init.yaml && echo "Surf Soho Wi-Fi Network Config (with Surf Local DNS) has been copied to Netplan SUCESSFULLY! Remember to apply changes with netplan." || echo "ERROR! Copying the Surf Wi-Fi Config to Netplan was UNSUCCESSFUL. Check your syntax and try again."'

# Connect the Pi to the Surf Soho Wi-Fi using Cloudflare DNS. Note: Remember to apply changes with netplan.
alias surfwificf='sudo mv /etc/netplan/*_only* /etc/netplan/surf-cloudflaredns_only-wifi && sudo cp /etc/netplan/configs/surf.cloudflaredns.wifi /etc/netplan/50-cloud-init.yaml && echo "Surf Soho Wi-Fi Network Config (with cloudflare dns) has been copied to Netplan SUCESSFULLY! Remember to apply changes to netplan." || echo "ERROR! Copying the Surf Wi-Fi (cloudflare dns) Config to Netplan was UNSUCCESSFUL. Check your syntax and try again."'

# Connect ethernet Only using local DNS
alias surfeth='sudo mv /etc/netplan/*_only* /etc/netplan/anyrouter-anyrouterdns_only-ethernet && sudo cp /etc/netplan/configs/anyrouter.anyrouterdns.ethernet /etc/netplan/50-cloud-init.yaml && echo "Ethernet Only Network Config (with local dns) has been copied to Netplan SUCESSFULLY! Remember to apply changes to netplan." || echo "ERROR! Copying the Anyrouter Ethernet (local dns) Config to Netplan was UNSUCCESSFUL. Check your syntax and rename the description file in the netplan directory."'

# Connect ethernet only using cloudflare DNS
alias surfethcf='sudo mv /etc/netplan/*_only* /etc/netplan/anyrouter-cloudflaredns_only-ethernet && sudo cp /etc/netplan/configs/anyrouter.cloudflaredns.ethernet /etc/netplan/50-cloud-init.yaml && echo "Ethernet Only Network Config (with cloudflare dns) has been copied to Netplan SUCESSFULLY! Remember to apply changes to netplan." || echo "ERROR! Copying the Anyrouter Ethernet (with cloudflare DNS) Config to Netplan was UNSUCCESSFUL. Check your syntax and rename the description file in the netplan directory."'


# r8000 Wi-Fi
# -----------

# Connect the Pi to the r8000 DDWRT Wi-Fi. Note: Remember to apply changes with netplan.
#alias r8000wifi='sudo cp /etc/netplan/configs/r8000.r8000dns.working /etc/netplan/50-cloud-init.yaml && echo "R8000 Wi-Fi Network Config \(with R8000 Local DNS \) has been copied to Netplan SUCCESSFULLY. Remember to apply changes with netplan." || echo "ERROR! Copying the r8000 Wi-Fi Config to Netplan was UNSUCCESSFUL. Check your syntax and try again."'

# Connect the Pi to the r8000 DDWRT Wi-Fi using Cloudflare DNS. Note: Remember to apply changes with netplan.
#alias r8000wificf='sudo cp /etc/netplan/configs/r8000.cloudflaredns.working /etc/netplan/50-cloud-init.yaml && echo "R8000 Wi-Fi Network Config (with cloudflare dns) has been copied to Netplan SUCESSFULLY! Remember to apply changes to Netplan." || echo "ERROR! Copying the R8000 Wi-Fi (cloudflare dns) config to Netplan was UNSUCCESSFUL. Check your syntax and try again."'

# Netplan apply
alias npapply='sudo netplan apply && echo "Netplan Sucessfully applied" || echo "Error! Netplan was NOT APPLIED! Check your syntax and try again!"'

###########################
######### OPENVPN #########
###########################

# Start $USER service at boot with openvpn@$USER.service
#alias bvpnstart='sudo systemctl start openvpn@$USER.service && echo "systemctl start openvpn@$USER.service worked. openvpn@$USER.service started successfully." || echo "Syntax error. We couldnt start openvpn@$USER.service, check your conf file and try again."'

# Stop $USER VPN service
#alias bvpnstop='sudo systemctl stop openvpn@$USER.service && echo "systemctl stop openvpn@$USER.service worked. openvpn@$USER.service is stopped." || echo "Syntax error. We couldnt stop openvpn@$USER.service, check your conf file and try again."'

# Enable $USER VPN Service at boot
#alias bvpnenable='sudo systemctl enable openvpn@$USER.service && echo "systemctl enable openvpn@$USER.service worked. openvpn@$USER.service enabled at boot." || echo "Syntax error. We couldnt enable openvpn@$USER.service, check your conf file and try again."'

# Disable $USER VPN Service at boot
#alias bvpndisable='sudo systemctl disable openvpn@$USER.service && echo "systemctl disable openvpn@$USER.service worked. openvpn@$USER.service disabled at boot." || echo "Syntax error. We couldnt disable openvpn@$USER.service at boot, check your conf file and try again."'

# Check status of VPN service at openvpn@$USER.service
#alias bvpnstat='sudo systemctl status openvpn@$USER.service && echo "systemctl status openvpn@$USER.service worked. Here is the status of openvpn@$USER.service." || echo "Syntax error. We couldnt check the status of openvpn@$USER.service, check your syntax and try again."'

# Disable openvpn-server@server.service
#alias dvpn='sudo systemctl disable openvpn-server@server.service && echo "openvpn-server@server.service disabled" || echo "openvpn-server@server.service NOT DISABLED. CHECK YOUR SYNTAX!"'

###########################
######## OPENVPN2 #########
###########################

### AWS Dans account

# Start $USER service at boot with openvpn@$USER.service
alias bvpnstart='sudo systemctl start openvpn-client@$USER && echo "systemctl start openvpn@$USER.service worked. openvpn@$USER.service started successfully." || echo "Syntax error. We couldnt start openvpn@$USER.service, check your conf file and try again."'

# Stop $USER VPN service
alias bvpnstop='sudo systemctl stop openvpn-client@$USER && echo "systemctl stop openvpn-client@$USER.service worked. openvpn-client@$USER.service is stopped." || echo "Syntax error. We couldnt stop openvpn-client@$USER.service, check your conf file and try again."'

# Enable $USER VPN Service at boot
alias bvpnenable='sudo systemctl enable openvpn-client@$USER && echo "systemctl enable openvpn-client@$USER.service worked. openvpn-client@$USER.service enabled at boot." || echo "Syntax error. We couldnt enable openvpn-client@$USER.service, check your conf file and try again."'

# Disable $USER VPN Service at boot
alias bvpndisable='sudo systemctl disable openvpn-client@$USER && echo "systemctl disable openvpn-client@$USER.service worked. openvpn-client@$USER.service disabled at boot." || echo "Syntax error. We couldnt disable openvpn-client@$USER.service at boot, check your conf file and try again."'

# Check status of VPN service at openvpn@$USER.service
alias bvpnstat='sudo systemctl status openvpn-client@$USER && echo "systemctl status openvpn-client@$USER.service worked. Here is the status of openvpn-client@$USER.service." || echo "Syntax error. We couldnt check the status of openvpn-client@$USER.service, check your syntax and try again."'

# Disable openvpn-server@server.service
alias dvpnserver='sudo systemctl disable openvpn-server@server.service && echo "openvpn-server@server.service disabled" || echo "openvpn-server@server.service NOT DISABLED. CHECK YOUR SYNTAX!"'

### AWS M's account

# Start $USER service at boot with openvpn@$USER.service
alias mvpnstart='sudo systemctl start openvpn-client@mAWS-VPN-Pi && echo "systemctl start openvpn@mAWS-VPN-Pi worked. openvpn@mAWS-VPN-Pi.service started successfully." || echo "Syntax error. We couldnt start openvpn@mAWS-VPN-Pi.service, check your conf file and try again."'

# Stop $USER VPN service
alias mvpnstop='sudo systemctl stop openvpn-client@mAWS-VPN-Pi && echo "systemctl stop openvpn-client@mAWS-VPN-Pi worked. openvpn-client@mAWS-VPN-Pi.service is stopped." || echo "Syntax error. We couldnt stop openvpn-client@mAWS-VPN-Pi.service, check your conf file and try again."'

# Enable $USER VPN Service at boot
alias mvpnenable='sudo systemctl enable openvpn-client@mAWS-VPN-Pi && echo "systemctl enable openvpn-client@mAWS-VPN-Pi worked. openvpn-client@mAWS-VPN-Pi.service enabled at boot." || echo "Syntax error. We couldnt enable openvpn-client@mAWS-VPN-Pi.service, check your conf file and try again."'

# Disable $USER VPN Service at boot
alias mvpndisable='sudo systemctl disable openvpn-client@mAWS-VPN-Pi && echo "systemctl disable openvpn-client@mAWS-VPN-Pi worked. openvpn-client@mAWS-VPN-Pi.service disabled at boot." || echo "Syntax error. We couldnt disable openvpn-client@mAWS-VPN-Pi.service at boot, check your conf file and try again."'

# Check status of VPN service at openvpn@$USER.service
alias mvpnstat='sudo systemctl status openvpn-client@mAWS-VPN-Pi && echo "systemctl status openvpn-client@mAWS-VPN-Pi worked. Here is the status of openvpn-client@mAWS-VPN-Pi.service." || echo "Syntax error. We couldnt check the status of openvpn-client@mAWS-VPN-Pi.service, check your syntax and try again."'

# Disable openvpn-server@server.service
alias mvpnserver='sudo systemctl disable openvpn-server@server.service && echo "openvpn-server@server.service disabled" || echo "openvpn-server@server.service NOT DISABLED. CHECK YOUR SYNTAX!"'

###########################
######## OPENVPN3 #########
###########################

### Vultr

# Start VultrPi service at boot with openvpn@VultrPi.service
alias vvpnstart='sudo systemctl start openvpn-client@VultrPi && echo "systemctl start openvpn-client@VultrPi worked and openvpn-client@VultrPi.service started successfully." || echo "Syntax error. We couldnt start openvpn-client@VultrPi, check your conf file and try again."'

# Stop VultrPi VPN service
alias vvpnstop='sudo systemctl stop openvpn-client@VultrPi && echo "systemctl stop openvpn-client@VultrPi worked. openvpn@VultrPi.service is stopped." || echo "Syntax error. We couldnt stop openvp-clientn@VultrPi, check your conf file and try again."'

# Enable VultrPi VPN Service at boot
alias vvpnenable='sudo systemctl enable openvpn-client@VultrPi && echo "systemctl enable openvpn-client@VultrPi worked. openvpn@VultrPi.service enabled at boot." || echo "Syntax error. We couldnt enable openvpn-client@VultrPi, check your conf file and try again."'

# Disable $USER VPN Service at boot
alias vvpndisable='sudo systemctl disable openvpn-client@VultrPi && echo "systemctl disable openvpn-client@VultrPi worked. openvpn@VultrPi.service disabled at boot." || echo "Syntax error. We couldnt disable openvpn-client@VultrPi at boot, check your conf file and try again."'

# Check status of VPN service at openvpn@$USER.service
alias vvpnstat='sudo systemctl status openvpn-client@VultrPi && echo "systemctl status openvpn-client@VultrPi worked. Here is the status of openvpn@VultrPi.service." || echo "Syntax error. We couldnt check the status of openvpn-client@VultrPi, check your syntax and try again."'

# Start openvpn session with listed configuration
alias vvpn3start='openvpn3 session-start --config-path /net/openvpn/v3/configuration/6497c61fx8b38x4ff2x8508xff9af0cb41bd'
alias vvpn3restart='openvpn3 session-manage --config /etc/openvpn3/VultrPi.conf --restart'
alias vvpn3stop='openvpn3 session-manage --config /etc/openvpn3/VultrPi.conf --disconnect'
alias vvpn3stat='openvpn3 sessions-list'
alias vvpn3conf='openvpn3 configs-list'
alias vvpn3rts='openvpn3 session-stats --session-path /net/openvpn/v3/configuration/6497c61fx8b38x4ff2x8508xff9af0cb41bd'
#alias vvpn3auto='openvpn3-autoload --directory /etc/openvpn3/autoload/'
alias vvpn3disable='sudo systemctl disable openvpn3-autoload.service'
alias vvpn3enable='sudo systemctl enable openvpn3-autoload.service'
alias vvpn3auto='sudo rm /etc/openvpn3/autoload/*.* && sudo cp /etc/openvpn3/autoload/off/VultrPi.autoload /etc/openvpn3/autoload/VultrPi.autoload && sudo cp /etc/openvpn3/autoload/off/VultrPi.conf /etc/openvpn3/autoload/VultrPi.conf && openvpn3-autoload --directory /etc/openvpn3/autoload/'
alias mvpn3auto='sudo rm /etc/openvpn3/autoload/*.* && sudo cp /etc/openvpn3/autoload/off/mAWS-VPN-Pi.autoload /etc/openvpn3/autoload/mAWS-VPN-Pi.autoload && sudo cp /etc/openvpn3/autoload/off/mAWS-VPN-Pi.conf /etc/openvpn3/autoload/mAWS-VPN-Pi.conf && openvpn3-autoload --directory /etc/openvpn3/autoload/'
alias vuvpn3auto='sudo rm /etc/openvpn3/autoload/*.* && sudo cp /etc/openvpn3/autoload/off/VultrPiUbuntu.autoload /etc/openvpn3/autoload/VultrPiUbuntu.autoload && sudo cp /etc/openvpn3/autoload/off/VultrPiUbuntu.conf /etc/openvpn3/autoload/VultrPiUbuntu.conf && openvpn3-autoload --directory /etc/openvpn3/autoload/'
alias vuvpn3set='sudo rm /etc/openvpn3/autoload/*.* && sudo cp /etc/openvpn3/autoload/off/VultrPiUbuntu.autoload /etc/openvpn3/autoload/VultrPiUbuntu.autoload && sudo cp /etc/openvpn3/autoload/off/VultrPiUbuntu.conf /etc/openvpn3/autoload/VultrPiUbuntu.conf'
alias vuvpn3enable='sudo systemctl enable openvpn3-autoload.service'
alias vuvpn3disable='sudo systemctl disable openvpn3-autoload.service'

##################################################
######## PROGRAM SHORTCUTS - UNORGANIZED #########
##################################################

# Make "nano" show the line number when using it
alias nano='nano -c'

# Quick access to hosts file
alias hosts='sudo nano -c /etc/hosts'

# Quick access to hostname file
alias hn='sudo nano -c /etc/hostname'

# Quick access to /etc/fstab
alias fstab='sudo nano -c /etc/fstab'

# Quick access to sites enabled
alias sabled='cd /etc/nginx/sites-enabled/'

# Quick access to totemlife.xyz.conf in sites enabled
alias etotem='sudo nano -c /etc/nginx/sites-enabled/totemlife.xyz.conf'

# Quick access to shamigfrom212.xyz.conf in sites enabled
alias eshamig='sudo nano -c /etc/nginx/sites-enabled/shamigfrom212.xyz.conf'

# Quick access to danranda.com.conf in sites enabled
alias edan='sudo nano -c /etc/nginx/sites-enabled/danranda.com.conf'

# Test Nginx
alias nt='sudo nginx -t'

# Quick access to bash aliases
alias ali='nano -c ~/.bash_aliases'

# Quickly update this (.bash_aliases-rpi4) aliases file and repository in your home folder. Also source the user ~/.bash_aliases file to instantly update aliases.
alias aliup='git -C $HOME/RP4-Ubuntu-Server-bash_aliases pull origin main && . $HOME/.bash_aliases'

# Uncomment below line to reload bash profile by typing "rl" in the terminal
alias rl='source ~/.bash_aliases && echo "File .bash_aliases reloaded correctly" || echo "Syntax error, bash aliases not reloaded"'

# Source ~/.bash_aliases file
alias sali='source ~/.bash_aliases && echo "File bash_aliases has been reloaded correctly" || echo "Syntax error, the file bash_aliases could not be reloaded correctly"'

# Quick access to reboot
alias rb='sudo reboot;logout'

# Quick access to shutdown
alias sd='sudo shutdown -h now;logout'

# SSHD_Config access
alias sconf='sudo nano -c /etc/ssh/sshd_config'

# Update and Full-Upgrade
alias apup='sudo apt-get update && sudo apt full-upgrade' 
alias apclean='sudo apt-get autoremove && sudo apt-get clean'

# Get my public IP address
alias pubip='echo "Your Public IP address is..." && curl https://ipinfo.io/ip'

# Get my private local IP address
alias privip="ip addr show eth0 | grep inet | awk '{ print $2; }' | sed 's/\/.*$//' && ip addr show wlan0 | grep inet | awk '{ print $2; }' | sed 's/\/.*$//'"

# Get my priviate local IP address for Freedombox
alias privipfbox="ip addr show end0 | grep inet | awk '{ print $2; }' | sed 's/\/.*$//'"

# Get my priviate local IP address for Parrot
alias privipp="ip addr show wlp3s0 | grep inet | awk '{ print $2; }' | sed 's/\/.*$//'"

# Get My public IP Address
alias ipinfo='curl ipinfo.io/ip'

# Internet Speed test
alias st='speedtest-cli'

# Openssl cryptographic benchmarks
alias sslbench='openssl speed des des-ede3 dsa2048 hmac idea-cbc md5'

# Ram Speed test with DD
alias ramtest='cd ~/ && mkdir RAM_test && sudo mount tmpfs -t tmpfs RAM_test/ && cd RAM_test && dd if=/dev/zero of=data_tmp bs=1M count=512 && dd if=data_tmp of=/dev/null bs=1M count=512'

# Edit the Perfect Forward Secrecy Configuration file
alias pfs='sudo nano -c /etc/nginx/perfect-forward-secrecy.conf'

# Check the nginx security headers for oddcake.net
alias shcake='curl -IL https://oddcake.net/ && curl -IL http://oddcake.net/'

# Check the nginx security headers for danran.rocks
alias shdanran='curl -IL https://danran.rocks/ && curl -IL http://danran.rocks/'

# Check the nginx security headers for mcmo.is
alias shmo='curl -IL https://mcmo.is/ && curl -IL http://mcmo.is/'

# Make "nano" show the line number when using it
alias nano='nano -c'

# Quick access to hosts file
alias hosts='sudo nano -c /etc/hosts'

# Quick access to hostname file
alias hn='sudo nano -c /etc/hostname'