Register in General

[cortner]

No description provided.

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/83543

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.3 -m "<description of version>" 3bf8708bfb2616bbfef5aeda808a171e4ef84361
git push origin v0.1.3

Also, note the warning: This looks like a new registration that registers version 0.1.3.
Ideally, you should register an initial release with 0.0.1, 0.1.0 or 1.0.0 version numbers
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/83543

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.3 -m "<description of version>" 86dc29fb76a336f614848e115c8c858b4964f1e1
git push origin v0.1.3

Also, note the warning: This looks like a new registration that registers version 0.1.3.
Ideally, you should register an initial release with 0.0.1, 0.1.0 or 1.0.0 version numbers
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/85040

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.4 -m "<description of version>" 786198a100f1ad17edaa192c394944f1f132c59c
git push origin v0.1.4

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/85040

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.4 -m "<description of version>" 6c57cf141d988a7d7c5acfe8154e534338bb9ced
git push origin v0.1.4

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/87361

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.5 -m "<description of version>" 542484c4d2992b6ef17245486a77321fedef5523
git push origin v0.1.5

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/87914

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.0 -m "<description of version>" d72e50daaba49bf520eecccdb79caab39395a9da
git push origin v0.2.0

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/88034

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.1 -m "<description of version>" 955f4f06c776e7a6554eefd7a6fb5ea83c453530
git push origin v0.2.1

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/88581

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.2 -m "<description of version>" 05b6879cf642c02926de931ad16d1d432ca78551
git push origin v0.2.2

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/90347

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.3 -m "<description of version>" 8409b9666d3a62fcb7178c5360201d5cfd3d291e
git push origin v0.2.3

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/92050

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.4 -m "<description of version>" 0395e2fe3d7a96e07a2d1ceddbaacef2ef6ccddc
git push origin v0.2.4

[cortner]

@JuliaRegistrator register

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/93037

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.6 -m "<description of version>" 5e4fc137d9b8b27414fee8eb13d54585644a1d07
git push origin v0.2.6

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/95409

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.7 -m "<description of version>" bac19a4e4e87505b5d190f65037cab1cff2b8f9d
git push origin v0.2.7

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/97599

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.8 -m "<description of version>" 6ca71ced4be7fddb935a4b3cf62dc819a44ea73b
git push origin v0.2.8

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/97605

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.9 -m "<description of version>" 51945fef9b52a0a0b5e9a44e9975e0d2f8a3b5ab
git push origin v0.2.9

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Error while trying to register: Version 0.2.9 already exists

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/98791

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.10 -m "<description of version>" d899c989eb4df2af5c8d9b78503084aab644a214
git push origin v0.2.10

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/99004

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.11 -m "<description of version>" b703a67beeaf06fb7389e08acf66e8233893e213
git push origin v0.2.11

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/109402

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.0 -m "<description of version>" f2c3b4d135cd4166bf69d67fc2d3ea9830e6c363
git push origin v0.3.0

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/109444

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.1 -m "<description of version>" c28e1b6682fa1c1b5489b60b6a6af595f9f1a84a
git push origin v0.3.1

Also, note the warning: Version 0.3.1 skips over 0.3.0
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/109402

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.0 -m "<description of version>" 813d8cbf1af0a3ada578e9a2bdfe369b8e4b9382
git push origin v0.3.0

[cortner]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/109444

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.1 -m "<description of version>" 5615e0a6bfeb9868bdb84489369238b82a828b25
git push origin v0.3.1